umajiyama tomae whetstone 6 x 1

umajiyama tomae whetstone 6 x 1Umajiyama Tomae Whetstone are used for finishing knives on sharpening systems such as Hapstone, TSPROF, and other systems compatible with the Edge Pro form factor. The stones are custom cut from bench stones sourced from a reliable Japanese seller, then lapped, mounted on high quality aluminum blanks, and laser engraved. All operations are performed in house at Gritomatic. Japanese name (Kanji): Name breakdown: (Umajiyama Umaji Yama) the Umaji mine, a

Umajiyama Tomae Whetstone are used for finishing knives on sharpening systems such as Hapstone, TSPROF, and other systems compatible with the Edge Pro form factor. The stones are custom-cut from bench stones sourced from a reliable Japanese seller, then lapped, mounted on high-quality aluminum blanks, and laser-engraved. All operations are performed in-house at Gritomatic.

Japanese name (Kanji): 馬路山 戸前 合砥石

Name breakdown:

• 馬路山 (Umajiyama / Umaji Yama) — the Umaji mine, a western Kyoto mine (Nishi Mono) located in the Kameoka district, Kyoto Prefecture, near the Ohira and Mizukihara mines
• 戸前 (Tomae) — strata designation: the fifth and most prolific working layer within the Hon-Kuchi Naori (48 seams), situated between the Senmai and Aisa layers; considered the most universal finishing strata
• 合砥 (Awasedo) — "finishing/polishing stone"; this word was previously mistransliterated as "Goto" on some stone labels and vendor listings. It is not a seam name, mine name, or any unique descriptor — it simply means the stone is an awasedo (finishing stone)

Mining region: Umajiyama is a western mine (Nishi Mono) in the Tamba/Tanba area, known for producing softer Tomae and Suita stones. Full production area address: Kyoto Prefecture, Minamikuwada district, Kameoka town, Umaji (京都府南桑田郡亀岡町馬路). The mine is closed; all current stock comes from material stored by wholesalers such as Tanaka Toishi.

Grit rating (JIS equivalent): Approximately 6,000–8,000 JIS for soft-to-medium hardness Tomae specimens. Natural stones vary considerably between individual examples.

LV Hardness: LV 2–3 (soft to medium). Umajiyama is well-documented as a mine known for producing softer Tomae stones. Confirmed individual specimens have been rated at hardness 3.5 on the 1–5 scale. At LV 2–3, the stone raises slurry quickly and easily, providing fast, forgiving performance.

Recommended progression: After a synthetic 3,000–5,000 JIS stone, or after a coarser natural stone. Functions as a finishing or pre-finishing stone. Well suited as a Kasumi polishing stage before progressing to harder finishing stones at LV 4+. Can also serve as the final stone for kitchen knives where a toothy, refined edge is preferred.

Composition: Siliceous shale (Hon-Kuchi Naori geological formation), formed under heat and pressure from marine sedimentary deposits over approximately 150–250 million years. Tomae strata stones consist of compressed silica and alumina-bearing grains bound in a clay-like matrix.

Steels to sharpen: Universal. Particularly well suited to Japanese carbon and stainless kitchen steels (hagane). Recommended for wide bevel polishing, Kasumi work, and edge finishing on a broad range of knives and tools. Suitable for both single and double bevel knives.