patrik aeon foil backwing

patrik aeon foil backwingIntroducing the Patrik AEON Foil Backwing. Patrik AEON Backwings offer maximum stability and control in all conditions. The special profile and shape of the backwings allow low angles of attack to be used on the backwings without losing control and flight stability. The entire profile system works as if it were cast from a single mold. The backwings are carefully matched to our fuselages and front wings. 160: Area 160 cm, wingspan 380 mm, aspect ratio

Introducing the Patrik AEON Foil Backwing.

Patrik AEON Backwings offer maximum stability and control in all conditions. The special profile and shape of the backwings allow low angles of attack to be used on the backwings without losing control and flight stability. The entire profile system works as if it were cast from a single mold. The backwings are carefully matched to our fuselages and front wings.

160: Area 160 cm², wingspan 380 mm, aspect ratio 9.03

195: Area 195 cm², wingspan 420 mm, aspect ratio 9.05

(Larger sizes for windsurfing and Wingfoil wave/freestyle and freeride coming in 2024).

CONSTRUCTION

In order to protect its competitive advantage in producing the stiffest products, Patrik will not disclose any design secrets for the AEON front wings.

With the AEON Foils, Patrik once again leads the industry in offering the thinnest and most highly visible designs with the stiffest flex-to-twist ratio.

All Foil parts are secured with TX40 Torx screws.
All front wings are attached to the fuselage with m8 TX40 screws.

SANDING AND WARRANTY

All AEON carbon parts are finished with a "clear coat" to give them a visually appealing and perfect appearance. This coating seals the carbon layers. Please note that sanding this factory coating—either completely or partially—will void the product warranty, and sanding is done at your own risk. Sanded AEON parts change their appearance from glossy to matte. Always seek the advice and guidance of experienced windsurfers before sanding your Foils. There is no general need to sand AEON carbon parts extensively, as we use a very advanced production process.

Michele Becker explains the basics of the hottest Foil on the market,
the Patrik AEON Slalom and Race: