EA-MT4
SKU: 3795941477

EA-MT4

Sale price$91.30 Regular price$101.44
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

EA-MT4Der 4 Kanal Verstrker EA MT4 von Emphaser bietet eine beeindruckende Kombination aus Leistung und Kompaktheit. Mit einer Ausgangsleistung von bis zu 4 x 100 Watt RMS an 4 Ohm und 2 x 320 Watt RMS im gebrckten Modus sorgt die EA MT4 fr kraftvollen Sound bei minimalen Verzerrungen. Der Verstrker zeichnet sich durch seinen enormen Frequenzbereich von 10 Hz bis 55 kHz und eine hohe Kanaltrennung fr przise Rumlichkeit aus. Ausgestattet mit variablen Hoch

Der 4-Kanal Verstärker EA-MT4 von Emphaser bietet eine beeindruckende Kombination aus Leistung und Kompaktheit. Mit einer Ausgangsleistung von bis zu 4 x 100 Watt RMS an 4 Ohm und 2 x 320 Watt RMS im gebrückten Modus sorgt die EA-MT4 für kraftvollen Sound bei minimalen Verzerrungen. Der Verstärker zeichnet sich durch seinen enormen Frequenzbereich von 10 Hz bis 55 kHz und eine hohe Kanaltrennung für präzise Räumlichkeit aus. Ausgestattet mit variablen Hoch- und Tiefpassfiltern, Cinch und High-Level Eingängen, sowie einer Auto-Turn-On Funktion, ist die EA-MT4 vielseitig und einfach in verschiedenen Car-Audio Systemen einsetzbar. Das kompakte Design mit einem massiven Kühlkörper aus Aluminiumdruckguss sorgt für eine effiziente Wärmeableitung und ermöglicht den Einsatz auf engstem Raum.

Der Klang

Der 4-Kanal Verstärker EA-MT4 aus der Monolith Serie von Emphaser bietet nicht nur geballte Power, sondern auch eine herausragende Dynamik und besondere Signaltreue. Der sehr lineare Frequenzgang von 10 Hz – 55 kHz und die niedrigen Verzerrungswerte geben dem Musiksignal die Möglichkeit, sich vollends zu entfalten und kein Detail auszulassen. Die hohe Kanaltrennung > 60 dB sorgt für eine wunderbare Räumlichkeit und genaue Platzierung des Musikgeschehens.

Die Leistung

Nur 212 x 35 x 110 mm groß, bietet die sehr kompakte EA-MT4 hohe Leistung auf engstem Raum. Das außergewöhnliche Kühlkörperdesign aus Aluminiumdruckguss ermöglicht deutlich kleinere Abmessungen bei gleichbleibend hervorragendem Temperaturmanagement. Die optimierte Class-D Verstärkerschaltung sorgt in Verbindung mit dem massiven Kühlkörper für enorme Leistung: Die EA-MT4 ist mit 4 x 100 Watt RMS an 4 Ohm und 2 x 320 Watt RMS gebrückt eine perfekte Kraftquelle für jede Car-Audio Anlage.

Die Ausstattung

Die EA-MT4 verfügt über eine umfangreiche Frequenzweiche mit 12 dB/Okt. Hoch- und Tiefpassfilter. Die Filter sind in einem sehr weiten Regelbereich von 20 – 4000 Hz (Hochpass) und von 50 – 5000 Hz (Tiefpass) einstellbar, so dass die EA-MT4 auch für Aktivsysteme genutzt werden kann. Die Filter sind einzeln anwählbar und zum Bandpassfilter kombinierbar (HPF + LPF). Alle Regler sind unter der massiven Leiste mit dem eingefrästen Emphaser Logo verborgen. Zur weiteren Ausstattung zählen Cinch und High-Level Eingänge sowie eine Auto-Turn-On Funktion zum Anschluss an Originalradios ohne Cinchausgang – damit lässt sich der 4-Kanal Verstärker EA-MT4 auf eine einfache Weise mit werkseitig installierten Radios kombinieren.

Hauptmerkmale EA-MT4

  • High-Performance Class-D Verstärker
  • Massiver Kühlkörper aus Aluminiumdruckguss
  • 2 Ohm stabil / 4 Ohm stabil gebrückt
  • Integriertes variables Hochpassfilter: 20 – 4000 Hz mit 24 dB/Okt.
  • Integriertes variables Tiefpassfilter: 50 – 5000 Hz mit 24 dB/Okt.
  • Variable Eingangsempfindlichkeit: 0,3 – 10 V
  • Cinch und High-Level Eingänge mit Auto-Turn-On Funktion
  • 20 mm Stromanschlussterminals

Technische Spezifikationen

  • Ausgangsleistung @ 4 Ohm: 4 x 100 Watt RMS
  • Ausgangsleistung @ 2 Ohm: 4 x 150 Watt RMS
  • Ausgangsleistung @ 4 Ohm gebrückt: 2 x 320 Watt RMS
  • Frequenzbereich: 10 Hz – 55 kHz
  • Dämpfungsfaktor @ 4 Ohm: > 400
  • Signal-Rauschabstand: > 90 dB
  • Abmessungen (B x H x T): 212 x 35 x 110 mm

Lieferumfang

  • 1 Stück Verstärker
  • 1 Stück High-Level Anschlusskabel
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 3795941477

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 1822 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Steve
Birmingham, US
★★★★★ 2
Does not fit 2023 Honda Accord as it says in the title
Size: CA12290-Premium, Size: CA12290-Premium
Does not fit 2023 Honda Accord as it says in the title. Seems like good quality otherwise.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 3, 2024
P
Verified Purchase
Philip and Lucy
New York, US
★★★★★ 5
Fits Toyota 2010 FJ cruiser
Perfect fit for a Toyota 2010 FJ cruiser. Install might have been the easiest cabin filter I've done in any car that new. Remove glove box, pull out the cover and replace it. Fits great and takes odors out from it sitting for 6 months in the driveway. No notice to less airflow when on any level of fan speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
S
Verified Purchase
S
Houston, US
★★★★★ 5
Comparison with POTAUTO filter: Very similar but cheaper
I bought a POTAUTO MAP 1033C and EPAuto CP846 cabin air filter to compare them for use in my 09 Legacy (gen 4). They both seemed comparable and are cheaper than most other, similar filters, though the POTAUTO was and still is ~33% more expensive than the EPAuto. Both seem built well-enough, considering they're only being used as relatively low-flow cabin filters. That said, the EPAuto is slightly better, mainly due to the white trim piece being unattached along one side on the bottom of the POTAUTO filter. Almost certainly nothing that will affect its performance or longevity, but it is interesting considering it's the more expensive of the two. However, it must be kept in mind that this is an incredibly small sample size. In one of my very scientific tests (/s), I held them up side by side and looked through them toward the sun (obviously being careful) to judge thickness/density and uniformity. Neither had any thin spots that I noticed, and they were pretty similar overall. One of them blocked slightly more light than the other, indicating more filtration, but I unfortunately don't remember which one. I feel like it was the EPAuto, but I don't really want to speculate as I could very well be wrong. What I do remember is that the difference was so minor that all else being equal, it wouldn't justify the cost difference between the two. In other words, even if the POTAUTO were the slightly better one, it wouldn't be worth the extra few dollars for the minimal amount of extra filtration. In another test, I compared the filters to each other and the old filter (which I'm pretty sure was OEM, but certainly not a charcoal filter, so it was significantly thinner) by blowing air from a compressor through them. I held the nozzle at roughly the same distance from each on one side of the filters, and I held my other hand at roughly the same distance from each on the other side. The old filter, unsurprisingly, let much more air flow through. Both charcoal filters were much more restrictive due to their extra thickness, leading me to feel much less air coming through. Both were roughly the same. Both filters also held up just fine to the strong blasts of air. I bought a couple other filters that I was going to cut to fit to use one or both with these filters as a pre-filter and/or additional charcoal layer. After the airflow test, I decided against this, as these are a lot more restrictive than OEM already, and I didn't want to push it, since that could at best cause issues with getting good airflow into the car, and at worst could damage the blower. If not for the fact many, many people have been using these and similar filters for a long time without apparent issue caused by this, I would hesitate to even use these. I haven't noticed a decrease in the airflow, but it's doubtful I would since I rarely turn the fan up past the first couple settings (usually have it on the first) if I have it running at all, and I have the center vents pulled out (to access the inside of the dash) which causes the flow at the vents to be reduced slightly. TL;DR - Both the POTAUTO and EPAuto charcoal filters appear to be a good choice, with the EPAuto having a slight edge on build quality (based on my limited sample size of one each) and a cheaper price. Filtration appears to be very similar between the two, certainly not enough of a difference to warrant the extra price for the POTAUTO over the EPAuto. Flow is significantly more restrictive than OEM filter but doesn't appear to be an issue. I give the EPAuto 5 stars and the POTAUTO 4 stars, only because the value of the POTAUTO is a good bit less (very similar or possibly even inferior quality for 33% more money). I can't speak to their longevity or performance, but I don't imagine either should prove to be an issue. -------------------------------------------------- As a side note relating specifically to the Legacy: replacing the cabin filter in this car is a PITA. It's not overly difficult per se, but a serious pain and certainly not something you're going to do when you have a spare few minutes. I'd rate it probably around a 3.5/10 in difficulty and a 7/10 for annoyance. While you can sort of access it by removing the manual compartment, you can't remove the tray through that. So you need to actually take the whole glove box out, which requires removing the side panel, unhooking the string/loop that keeps it from falling all the way down, and removing a few plastic screws, which can be a bit of a pain (and apparently Subaru loves them since they're all over the car). A stubby Philips driver will be helpful. Once you have the glove box out of the way, you have to unscrew several more of those plastic screws to remove the plastic cover between the glove box and the filter. This hole is where you gain access. Be careful when removing the old filter as loose dirt and debris may fall out and make a bit of a mess. You don't really want to get any in the fan below it if you can help it. Reverse the steps to reassemble it, and remember to reattach the string. Getting the glove box back in its track can be a bit of a challenge; in my experience from doing it multiple times I've found you sort of half force it and half don't. That is, it'll likely offer some resistance even if it's lined up, so if you try to baby it you'll probably be there a while, but also play with the alignment a bit to see if you can get it without marring up the tab and the slot on the right side too much. All in all, expect to spend anywhere from 15-45 minutes on this, and make sure you have a standard length as well as a shorter or stubby Philips screwdriver. I have to say, when it comes to air filters, this car is horrible. The air intake filter is a pain to change, too--much worse than most if not all other cars I've done. -------------------------------------------------- Keywords: Subaru Legacy, fourth gen, fourth generation, 4th gen, 4th generation, 03, 04, 05, 06, 07, 08, 09, 2003, 2004, 2005, 2006, 2007, 2008, 2009
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 29, 2017
R
Verified Purchase
R
Cuba, US
★★★★★ 5
Good price on the part and 5 min install saved me $35
Fit fine in my 4th gen 4Runner took 5mins to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
M
Verified Purchase
M. Clark
Los Angeles, US
★★★★★ 4
Fit 4runner
Fit my 05 4runner. Good product
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 2, 2025

recommand products