Pay in installments of $1006.62 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 29 - Aug 3
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
PSS-Dichtung 125 mm Welle, 6 1/2' StevenrohrDie PSS Wellendichtung Typ B ist eine mechanische Gleitringdichtung. Die Dichtflche entsteht zwischen den ebenen Flchen des rotierenden Edelstahlrotors und dem stationren Kohleflansch. Der stationre Kohleflansch wird mit Schlauchklemmen an der Vorderseite des Balges und das hintere Ende des Balges ber das Sternrohr befestigt und wird mit Schlauchklemmen gesichert. Der Edelstahlrotor ist auf der Welle vor dem Kohleflansch montiert. Der Edelstahlrotor
Die PSS Wellendichtung Typ B ist eine mechanische Gleitringdichtung. Die Dichtfläche entsteht zwischen den ebenen Flächen des rotierenden Edelstahlrotors und dem stationären Kohleflansch.Der stationäre Kohleflansch wird mit Schlauchklemmen an der Vorderseite des Balges und das hintere Ende des Balges über das Sternrohr befestigt und wird mit Schlauchklemmen gesichert. Der Edelstahlrotor ist auf der Welle vor dem Kohleflansch montiert. Der Edelstahlrotor wird verwendet, um den Balg zu komprimieren, bevor der Rotor mit Stellschrauben an der Welle befestigt wird. Diese Kompression (Vorspannung) sorgt für einen konstanten Kontakt zwischen den beiden flachen Seiten des Edelstahlrotors und des Kohleflansches. Dadurch kann die PSS Wellenabdichtung die variable Vorwärts- und Rückwärtsbewegung - bedingt durch den Propellerschub - ausgleichen. Der Kohlenstoffflansch ist zum Wellendurchmesser überbohrt, so dass er um die Welle herum 'schwimmen' kann und somit die meisten Fehlausrichtungs- und Schwingungsprobleme ausgleicht. Der Rotor aus rostfreiem Stahl ist durch zwei O-Ringe, die in die Bohrung des Kragens eingelassen sind, gegen die Welle abgedichtet. Diese O-Ringe rotieren mit der Welle und dem Edelstahlrotor und unterliegen keinem Verschleiß während des Betriebs.
Temperaturgrenzen: -13°F bis 425°F (-25°C bis 220°C)
Druckbegrenzungen: 3,5 BAR (50 PSI)
Grenzwerte für die Wellendrehzahl: 7.000 U/min.
Kohlenstoff-Graphit: Auf 4 HLB geläppt (0,00000044' Toleranz)
316SS / Nitronic 50: Gegenüber 9 Ra
Balgmaterial: Dornförmiges Silikon / Gewebe
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 11 reviews
Sort
Product Reviews
★★★★★ 5
e46 Sedan Black Kidney Grill: Good fit with a better attachment mechanism than stock!
Size: For BMW E46 1998-2001
These kidney grill replacements were for a e46 sedan (323i). They fit really well. They come with a different type of attachment mechanism than other types I've used in the past: These have 'posts' with a slight groove that you gently pry into place against the hood's mounting tabs. It's a solid holding mechanism - much better than the tab-types I've seen in the past. These do not wiggle around, and feel very solid once mounted. They DID require a bit of fitting with a dremel where the hood release latch is mounted to the hood. I had to cut back about half-an-inch of the inner 'shell' of the grill so it didn't interfere with the latch when you pull 'up' on it to release the hood. Based on having an e46 sedan for 16+ years, and having replaced the kidney grills several times, I'm quite fine with a little bit of modification for a good fit. I like these quite a bit better than other aftermarket types, and even the OEM BMW grills. The price is good, and mounting is solid. I liked them so much, I purchased a second set for my son's 323i right after putting them on one of my 323i's.
I plan on getting a set for a 325Ci one that car needs replacements.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 24, 2021
★★★★★ 5
They fit super snug and the quality is way better than price suggests.
Size: For BMW E46 2002-2005
They came in wrapped very well in foam and bubble wrap. They felt sturdy and the matte finish was satisfactory. They needed quite some pressure to snap in but when they did you could tell they weren’t going anywhere. The fitment is perfect and it looks great. If the stubs in the car where the grille clips attach are in tact you shouldn’t have a problem. Don’t be discouraged by the negative reviews.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 30, 2024
★★★★★ 4
Good value for the money
Size: For BMW E46 2002-2005
The matte is flawless and looks pristine & super easy to install. It does fit and it’s a good enough fit for a daily driver; however, it’s not a flawless fit. It’s off by maybe a 1/16th on the inside corners. It’s amazingly close despite the price point…would definitely recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 28, 2022
★★★★★ 1
VERY poor materials and fit for E46, WILL FALL OUT
Size: For BMW E46 2002-2005, Size: For BMW E46 2002-2005
This part resembles the original, but not enough.
It is both too big AND too small, depending on the dimensions. It's too small from top to bottom, and too big from side to side. The locking tabs don't get close enough to lock (see pics) because there is too little clearance. Viewing from the front, the outer top corner is so far out (see pics) that the most important tab cannot properly lock in, causing the grill to drop out into my hand (or the ground, if I wasn't there to catch it). The grill also is missing some important curves to follow the shape it is supposed to fit into.
It also wasn't matte black as ordered. It looks like it was spray-painted, but I can't be sure. it is made of VERY brittle plastic, and the locking tabs are VERY small and flimsy. I wouldn't expect this part to survive a month or two before blowing away in a medium breeze.
One positive is that there is a relief cut to allow the hood safety catch handle to move fully upward without interfering with the plastic grille. That one positive has a lot of making up to do, and there's no way it can do it. Add to that that the seller included instructions for a car fifteen years newer than the model advertised on the item page, and we have a complete failure. But don't worry! I'm sure the seller will probably delete the listing and make a new one so they don't have to have this honest review attached to it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 6, 2025
★★★★★ 5
Quality grills for e46 BMW
Size: For BMW E46 2002-2005
No reason to buy replacement grills at the dealer or even at an auto parts store. These are great quality for a fraction of the price...and you get both sides. Highly recommended if you have an e46 and the grill plastic has deteriorated and is loose. These grills are thick and robust. I like them better than the original. Fit is snug but they look great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 18, 2025