Pay in installments of $7.49 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 5 - Aug 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Birkmann Premium Baking Wähen- und Kuchenblech, Quicheform, Tarteform, Backform, Kuchenbackform, Ø 28 cm, 882225Quiche, Tarte oder Whe das ist hier die Frage Die Whe ist ein aus Sdwestdeutschland bzw. der Schweiz stammender flacher Kuchen, mit einem Boden aus feinem Mrbeteig und einem leckeren Belag aus Frchten, Gemse oder Kse. Mancherorts wird er auch mit Hefeteigboden oder Bltterteig gebacken. Die Whe wird westlich des Rhein hufig als Quiche oder Tarte bezeichnet. Sdlich der Alpen mgen auch schon wrzige, mit Tomatensoe, Mozzarella und weiteren schmackhaften
Quiche, Tarte oder Wähe - das ist hier die FrageDie Wähe ist ein aus Südwestdeutschland bzw. der Schweiz stammender flacher Kuchen, mit einem Boden aus feinem Mürbeteig und einem leckeren Belag aus Früchten, Gemüse oder Käse. Mancherorts wird er auch mit Hefeteigboden oder Blätterteig gebacken. Die Wähe wird westlich des Rhein häufig als Quiche oder Tarte bezeichnet. Südlich der Alpen mögen auch schon würzige, mit Tomatensoße, Mozzarella und weiteren schmackhaften Zutaten belegte und überbackene Hefeteigfladen in einer Wähenform gesichtet worden sein.
Premium Baking- Professionelle Backformen für allerhöchste Ansprüche
Premium Baking steht für Hingabe zu Qualität, Liebe zum Detail und eine elegante, edel und modern anmutende Inszenierung. Neben der exzellenten Whitford- Beschichtung für beste Antihafteigenschaften überzeugen die Premium Baking- Formen durch ihre besonders stabile Ausführung, die saubere Verarbeitung und viele zeitgemäße Details: Etwa die Springformen mit schnittfestem Boden, einem extra hohen Ring für moderne Torten oder dem ganz zu öffnendem Verschluss aus Edelstahl für eine einfache und gründliche Reinigung. Die besondere Materialstärke sorgt für eine gleichmäßige Wärmeverteilung. Premium Baking, das ist Backen für den perfekten Moment.
• Serie: Premium Baking
• Backform mit Emaillebeschichtung
• Kratz- und schnittfest dank hochwertiger Beschichtung
• Exzellente Antihaftbeschichtung
• Hohe Materialstärke für Stabilität
• Besonders gleichmäßige Wärmeleitfähigkeit
• Handreinigung
Länge: 28 cm
Höhe: 4 cm
Material: Blech emailliert
Hersteller-Artikelnummer: 882225
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 16 reviews
Sort
Product Reviews
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023
★★★★★ 5
Great value
This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2024
★★★★★ 1
Unfinished product - doesn't work - waste of money
in order to use this as an installation tool the directions tell you to drill a hole through the 2 inch steel rod..... either this hole should already be drilled, or this should not be advertised as an installation tool..... it will not install any bearings without extensive modification and requires the use of a drill press or a lathe. very dissatisfied that I now have to buy ANOTHER tool just to finish this job because this one doesn't do what it's described to do.... piece of junk... typical amazon garbage.... this is why I haven't used amazon in over a year... they rip you off with garbage.... I should have known better .... don't buy this junk .... Now they say 20 -30 days to get my refund .... Don't waste your time
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
recommand products
EUCERIN HYALURON FILLER contorno de ojos 15 ml
42.66
Siegelring mit Monogramm in Gold, rosévergoldetes Silber, 25 g | Meissen Geschenke Individuell
284.50
Henkelbecher Kolibris V 0,25 l, H 9 cm | Meissen Nova
99.00
Siegelring, Monogramm Kobaltblau, 925 Sterlingsilber | Meissen Schmuck Individuell
184.50
Speiseteller, Royal Meander, Ø 24 cm | Meissen Cosmopolitan
139.00