SKU: 84430138467

STRÜBER Dämmstoffdübel Set 8x135mm Schraubdübel mit Metalldorn 600 Stk. + 600 Styropor Rondelle + 1 Fräser / WDVS-SET

$151.01 $167.79
Save 10%
No.2 Bestseller on 2pierres.com >

Pay in installments of $41.95 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 25 - Aug 30

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

STRÜBER Dämmstoffdübel Set 8x135mm Schraubdübel mit Metalldorn 600 Stk. + 600 Styropor Rondelle + 1 Fräser / WDVS-SETSTRBER WDVS SET Dmmstoffdbel mit Metalldorn + Styropor Rondelle + Styroporfrser Komplett Set fr professionelle WDVS Montage Mit dem STRBER WDVS Set erhalten Sie eine hochwertige Komplettlsung fr die Befestigung von Wrmedmmverbundsystemen (WDVS) an Fassaden. Das Set besteht aus robusten Dmmstoffdbeln mit Metalldorn, passenden Styroporrondellen sowie einem przisen Styroporfrser. Ideal geeignet fr Beton, Voll und Lochziegel, Hohlblocksteine, Naturstein

STRÜBER WDVS SET – Dämmstoffdübel mit Metalldorn + Styropor Rondelle + Styroporfräser

Komplett-Set für professionelle WDVS-Montage

Mit dem STRÜBER WDVS Set erhalten Sie eine hochwertige Komplettlösung für die Befestigung von Wärmedämmverbundsystemen (WDVS) an Fassaden. Das Set besteht aus robusten Dämmstoffdübeln mit Metalldorn, passenden Styroporrondellen sowie einem präzisen Styroporfräser. Ideal geeignet für Beton, Voll- und Lochziegel, Hohlblocksteine, Naturstein und Gasbeton.

Dämmstoffdübel KTS – zuverlässig & wärmebrückenfrei

  • Typ: Tellerdübel mit Stahlnagel (TX-Antrieb)
  • Dübeldurchmesser: Ø8 mm
  • Schaftdurchmesser: Ø8 / Ø10 mm
  • Tellerdurchmesser: Ø60 mm
  • Material: Stahlnagel mit Kunststoffbeschichtung (Nylon), Dübel aus Polyamid
  • Modell: KTS
  • Marke: STRÜBER

Die hochwertige Verarbeitung sorgt für eine sichere Verankerung, minimierte Wärmebrücken und einfache Montage durch den Torx-Antrieb.

Styroporfräser – präzises Versenken

  • Fräsdurchmesser: 67 mm
  • Frästiefe: 22 mm
  • Zum sauberen Versenken der Dämmstoffhalter im Styropor

Styroporrondellen – perfekte Abdeckung

  • Fräsdurchmesser: 67 mm
  • Dicke: ca. 20 mm
  • Verhindern Kältebrücken
  • Sorgen für sauberen Abschluss bei Putzarbeiten
  • Ermöglichen den Einsatz kürzerer Dübel (bis zu 2 cm), was Kosten spart

Vorteile des STRÜBER WDVS-Sets

✔️ Komplettlösung – alles in einem Set
✔️ Reduziert Wärmebrücken effektiv
✔️ Spart Zeit und Materialkosten
✔️ Ideal für WDVS-Fassadenmontage im Neubau & bei Sanierungen
✔️ Passgenaue Verarbeitung für professionelle Ergebnisse

Herstellerinformationen, Verantwortliche Person für die EU:
STRUBER SP. Z O.O.
ul. Lubczykowa 5, 80-177 Gdańsk
[email protected]

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 84430138467

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 26 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Rhbones
Waukegan, US
★★★★★ 5
Works for my 2011 115hp Etec
Size: For 75-250 HP
Exact fit and cheaper than a trip to a repair shop. Make sure you have the proper gasket sealer, a good scrapper that's not going to dig into the sealing surface, and tools for the job. I went on my computer and downloaded a video that walked me through the process. I'm a mechanic by trade but wanted to ensure everything was correct. I've been running the motor now for a couple of months. Peeing just as it's supposed to. No more delivering, waiting, and retrieving my boat from the shop for its routine service. Just follow your owner's manual to make sure you do all the necessary maintenance.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2025
C
Verified Purchase
Chelsey R
Battle Creek, US
★★★★★ 5
Great replacement
Size: For 5.5HP 6HP 7.5HP
Works as it should. Easy to swap out.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 12, 2025
D
Verified Purchase
Dan
Fort Morgan, US
★★★★★ 5
Works
Size: For 60 65 70 75 HP
Works great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
B
Verified Purchase
Billy kinney
New York, US
★★★★★ 4
Great product
Size: For 85-300 HP
Complete rebuild kit for $38 and great quality and fast delivery
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 30, 2025
G
Verified Purchase
grog
Louisville, US
★★★★★ 5
If pump doesn't seem to work
Size: For 85-300 HP, Size: For 85-300 HP
Hi....I apologize it took me a while to get back to you with my results. Here is what I discovered about the pump and will also apply to some of the other comments I read in the reviews with people not getting the pump to work: 1.) I removed the pump to check the proper direction of the impeller and it was correct as can be seen in the photo. 2.) I built a pump shaft attachement so that I could operate the pump with a power drill. 3.) I attached the water muff to the unit and tried to pump water.....it wouldn't do so. What I did see however was that even at high hose discharge and small leakage at the muff I could not fill the water cavity in the housing. 4.) I installed a strap around the muff and tightened it very tight and THEN at high hose pressure I was able to get the cavity to fill with water. 5.) At that point I activated the drill and was able to get the pump to actually pump water. I then removed the pump housing and removed the O-Ring that resides on top of the impeller, reassembled and it would not pump water. Since the O-Ring sits higher than the original does I wanted to make sure that it was necessary to have it in the pump. 6.) I reassembled the engine and kept the tight strap on the bottom and finally it pumped water into the engine. My conclusion that you can reply to other buyers if they have a problem: Do NOT underestimate 2 things....1.)the lack of ability of the pump to draw water up AND 2.)the fact that if the muff leaks it will NOT fill the cavity when common sense says it should. This was a 120hp Johnson. The engine bottom must be immersed fully or the muff must be very tight on the lower unit for the pump to function. Please feel free to post this if you wish.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 12, 2024

recommand products

Makita DK 1454 W Akku Combo Kit Bohrschrauber DF330D + Handkreissäge HS300D + 2x Akku + Ladegerät
169.01
DeWalt DCD 985 Akku Schlagbohrschrauber 18V 80 Nm + 1x Akku 5,0Ah - ohne Ladegerät
178.31
Bosch GSR 18 V-EC Akku Bohrschrauber 2016 neue Version mit Metallbohrfutter Solo Gerät
100.62
Bosch GSR 10,8-Li Akku Bohrschrauber in L-Boxx + 1 x GBA 10,8 V 2,5 Ah Akku
124.87
Makita SK 104 Z Kreuzlinienlaser Solo
99.75