Autoglym All Purpose Cleaner 1 Litre

Autoglym All Purpose Cleaner 1 LitreAll Purpose Cleaner has been designed to assist with exterior cleaning and is ideal as a pre spray prior to a shampoo, to loosen bugs, stubborn dirt and traffic film from paintwork and wheels. It has excellent degreasing qualities so is a perfect solution for grimy engine bays, door and boot shuts and fuel filler cavities. All Purpose Cleaner is also safe to use on your cars interior surfaces and is perfect for a heavily soiled or stained interior or

All Purpose Cleaner has been designed to assist with exterior cleaning and is ideal as a pre-spray prior to a shampoo, to loosen bugs, stubborn dirt and traffic film from paintwork and wheels.

It has excellent degreasing qualities so is a perfect solution for grimy engine bays, door and boot shuts and fuel filler cavities.

All Purpose Cleaner is also safe to use on your car’s interior surfaces and is perfect for a heavily soiled or stained interior or a thorough annual clean for plastics, fabrics and even leathers

Do not apply in direct sunlight or if paintwork is warm to touch.

1. For best results apply to dry surfaces. Apply cleaner liberally, especially where they is a build up of mud or dirt, and allow to dwell for up to 5 minutes. Important: Do not allow to dry.
2. When removing grease and grime, agitate with a soft brush or wash mitt.
3. Rinse with high pressure water. Stubborn deposits may require repeat applications with agitation.
4. If using as a bodywork pre-spray now shampoo the vehicle

Interior use:

Always pre-test colour fastness of surfaces before use.

1. Fabric surfaces: Apply sparingly with a fine spray. Gently agitate with a brush or interior sponge then wipe with a clean damp cloth
2. For leather, vinyl and hard surfaces: Apply directly to an Microfibre Cloth or sponge and wipe over the surface to be cleaned. Do not use a brush and avoid excessive rubbing. Finally, wipe with a clean damp cloth

Alcantara: Apply sparingly to a clean, damp cloth and wipe gently. Do not over wet the surface and avoid excessive rubbing. Dry with a clean cloth. A brush can help the fibres lay correctly after cleaning.

DO NOT USE on sat nav or dashboard screens.