Pay in installments of $42.74 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 9 - Sep 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ResinTech PPM Waterproofing MembraneUsually In Stock North Vancouver, BC. Call 250 233 3000 to confirm availability or arrange pickup. ResinTech PPM Elastomeric Waterproofing Membrane Field Details Brand ResinTech Product Code PPM Product Type Single component, moisture cured elastomeric waterproofing & protective membrane Packaging 10 L pail System Role Standalone waterproofing membrane, or intermediate waterproofing layer within ResinTech systems ResinTech PPM is a single component,
✅ Usually In Stock — North Vancouver, BC. Call 250-233-3000 to confirm availability or arrange pickup.
ResinTech PPM — Elastomeric Waterproofing Membrane
| Field | Details |
| Brand | ResinTech |
| Product Code | PPM |
| Product Type | Single-component, moisture-cured elastomeric waterproofing & protective membrane |
| Packaging | 10 L pail |
| System Role | Standalone waterproofing membrane, or intermediate waterproofing layer within ResinTech systems |
ResinTech PPM is a single-component, moisture-cured elastomeric coating that forms a continuous, seamless, pinhole-free waterproofing membrane. It cures by reaction with ambient moisture into a crosslinked elastomeric film and is applied by brush, roller, trowel or airless spray on horizontal, vertical and inclined surfaces. PPM delivers high-elongation, crack-bridging waterproofing for concrete and metal in both protected and exterior assemblies. Confirm membrane thickness, number of coats, primer and detailing against the current TDS, SDS and project specification.
Performance Characteristics
- Ready-to-use, single-component formulation — no proportioning or mixing
- Seamless, joint-free, pinhole-free waterproofing membrane
- Elastomeric behaviour with high elongation to accommodate substrate movement
- Good retention of mechanical properties after thermal aging
- Resistant to intermittent exposure to dilute acidic and alkaline solutions
- Low VOC content
- Strong adhesion to prepared concrete
- Suitable for exterior exposure — weather resistance depends on system build and exposure conditions
Product Data
Source: ResinTech PPM Technical Data Sheet (PPM TDS v1.0). Typical values; confirm against the current TDS and SDS before specifying or ordering.
| Property | Value |
| Cure Type | Single-component, moisture-cured |
| Solids Content | 88.5% |
| VOC Content | 19.2 g/L |
| Recommended Thickness (waterproofing) | 1.2–1.5 mm |
| Consumption | ~1.5–1.8 kg/m² |
| Coverage | ~80–100 sq ft per US gallon (method- and thickness-dependent) |
| Packaging | 10 L pail |
| Storage | Cool, dry, 5–30 °C; protect from sunlight, moisture ingress and freezing |
| Shelf Life | 12 months (unopened) |
Mechanical & Waterproofing Properties
Typical values from the ResinTech PPM TDS. Actual results depend on substrate, film build, detailing and conditions — confirm against the current TDS.
| Property | Result |
| Tensile Strength | 2.45 MPa |
| Elongation at Break | 648% |
| Tear Strength | 19 N/mm |
| Bond Strength (Concrete) | 1.06 MPa |
| Low-Temperature Flexibility | −35 °C, no cracking |
| Water Impermeability | Impermeable at 0.3 MPa for 120 min |
| Absorption Rate | 2.8% |
Durability & Environmental Resistance
| Test | Result |
| Heat Aging (80 °C, 168 h) — Tensile Retention | 95% |
| Heat Aging (80 °C, 168 h) — Elongation | 566% |
| Alkali Immersion (168 h) — Tensile Retention | 93% |
| Alkali Immersion (168 h) — Elongation | 564% |
| Acid Immersion (168 h) — Tensile Retention | 94% |
| Acid Immersion (168 h) — Elongation | 559% |
Curing (typical, ~20 °C)
Curing rate and final film properties vary with temperature, humidity, airflow and film thickness. Confirm against the current TDS.
| Stage | Time |
| Tack-Free | 2–3 hours |
| Drying Time | ~9 hours |
| Working / Action Time | 21 hours |
| Recoat Window | 16–24 hours |
| Full Cure | 24–48 hours |
Typical Applications
- Parkades, ramps and mechanical rooms
- Balconies, patios, podium slabs and sundecks
- Basements, foundations and retaining walls
- Swimming pool decks, tanks and containment areas
- Planters, roofs and waterproofing details
- Dam proofing and infrastructure waterproofing
- Intermediate waterproofing layer within ResinTech coating systems
- Standalone liquid-applied roofing membrane where no traffic or wear layer is required
Substrate & Surface Preparation
All substrates must be structurally sound, clean, dry and free of contaminants that may impair adhesion. Confirm against the current TDS.
Limitations
- Do not exceed the recommended thickness in a single application — excessive thickness may cause blistering.
- Reinforcement fabric is recommended at cracks and expansion joints.
- Not a wear surface — where trafficked, protect with a separately specified wearing course or coating.
- Not intended as a vapour barrier or for negative-side hydrostatic pressure without additional design measures.
- Cure time, coverage and recoat windows vary with temperature, humidity and film thickness — confirm against the current TDS.
Request the current ResinTech PPM Technical Data Sheet (TDS) and Safety Data Sheet (SDS) from Canopus Supply before specifying or ordering.
Trade Purchasing Note
All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.
Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.
For volume orders, system compatibility questions, pickup timing or delivery across BC, contact Canopus Supply before placing a bulk order.
Call: 1 (250) 233-3000
Email: [email protected]
Pickup: Unit 103, 185 Forester Street, North Vancouver, BC
Canopus Supply Inc. — Authorised ResinTech Distributor, Metro Vancouver & BC
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy