Pay in installments of $41.25 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 16 - Aug 21
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ResinTech TUE: Transparent Universal Epoxy (100% Solids)Usually In Stock, North Vancouver, BC. Call 250 233 3000 to confirm availability or arrange pickup. ResinTech TUE 100% Solids Transparent Universal Epoxy Field Details Brand ResinTech Product Code TUE Product Type 100% solids transparent universal epoxy (primer build broadcast binder self level) Kit Pack Size 15 L kit Part A 10 L + Part B 5 L (4. 0 US gal mixed) Colour Finish Clear, glossy with a slight satin sheen; field pigmented when approved
✅ Usually In Stock, North Vancouver, BC. Call 250-233-3000 to confirm availability or arrange pickup.
ResinTech TUE — 100% Solids Transparent Universal Epoxy
| Field | Details |
| Brand | ResinTech |
| Product Code | TUE |
| Product Type | 100% solids transparent universal epoxy (primer / build / broadcast binder / self-level) |
| Kit / Pack Size | 15 L kit Part A 10 L + Part B 5 L (4.0 US gal mixed) |
| Colour / Finish | Clear, glossy with a slight satin sheen; field-pigmented when approved |
| System Role | Premium epoxy reinforcement / build layer may substitute for CBE |
ResinTech TUE is a 100% solids, two-component transparent universal epoxy for commercial and industrial concrete floor systems. It is used as a primer, reinforcement / build coat and broadcast binder for flake, quartz, metallic and solid-colour systems, and as the premium epoxy layer in ResinTech traffic coating systems, where it may be substituted for CBE. For UV-exposed or exterior applications, specify a UV-stable aliphatic topcoat such as ResinTech HPP polyaspartic topcoat, TCU aliphatic urethane topcoat, or CRU chemical-resistant urethane topcoat where required by the system design.
Best-Use Applications
Confirm all applications against the current ResinTech TDS before specifying.
- Parkade decks and ramps
- Exposed balconies and podium slabs
- Commercial and industrial concrete floors
- Flake, quartz, metallic and solid-colour broadcast systems
- Pedestrian walkways and stairwells
Product Data
Source: ResinTech TUE Technical Data Sheet (TDS-TUE-1.0). Typical values at 23 °C and 50% RH unless noted. Confirm against the current TDS before specifying or ordering.
| Property | Typical Value | Note |
| Components | Two — Part A resin + Part B hardener | Mix full kits where possible |
| Mix Ratio | 2:1 by volume (Part A : Part B) | — |
| Solids Content | 100% by weight | — |
| VOC | < 50 g/L | Effectively VOC-free for a 100% solids epoxy confirm against SDS |
| Appearance | Clear or pigmented | Clear resin may appear slightly amber in mass |
| Odour | Low | Use ventilation during application |
| Induction Time | None | Apply immediately after proper mixing |
| Shelf Life | 10 months | Unopened, stored properly at about 25 °C |
| Storage | Sealed, cool, dry, ~25 °C | Protect from freezing, heat, moisture and direct sunlight |
Performance Properties
Typical values from the ResinTech TUE TDS. Actual results depend on substrate, preparation, mixing, film build and conditions — confirm against the current TDS.
| Property | Typical Value | Test Method / Note |
| Bond Strength to Concrete | 370 psi | ASTM D4541; typically concrete cohesive failure |
| Tensile Strength | 6,500 psi | ASTM D412 / D638 |
| Elongation | 6% | ASTM D412 / D638 |
| Abrasion Resistance | 35 mg loss | ASTM D4060, CS-17 wheel, 1000 g, 1000 cycles (excellent for an epoxy) |
| Shore Hardness | 80 D | ASTM D2240 |
| Tack-Free Time | 10 hours | ASTM D1640 at 15 mils |
| Drying Time | 20 hours at 15 mils | ASTM D1640, 24 °C / 50% RH |
| UV Resistance | UV-resistant epoxy | Not a UV-stable aliphatic topcoat; use HPP/CRU for permanent unprotected UV |
| Chemical Resistance | Excellent | For severe chemical service, topcoat with CRU confirm against TDS |
Working Time, Recoat & Cure
Times vary with temperature, film build and conditions. Large mixed volumes shorten pot life and can create heat. Confirm against the current TDS.
| Temperature | Pot Life | Recoat Window | Light Foot Traffic | Full Cure |
| 10 °C | 60–75 min | 18–24 h | 36–48 h | ~10 days |
| 21 °C | 40–60 min | 14–18 h | ~24 h | ~7 days |
| 30 °C | 20–30 min | 8–12 h | 12–18 h | 4–5 days |
If the surface is hard, glossy or outside the recoat window, sand / abrade, vacuum and clean before recoating.
Coverage & Film Build
Per US gallon. A 15 L kit is approximately 4.0 US gal. Actual coverage varies with profile, porosity, film build and method — confirm against the current TDS.
| Use | Typical Film / Build | Typical Coverage |
| Primer / Base Coat | 8–10 mils | 200–160 ft²/US gal |
| Top Coat | 8–16 mils | 245–120 ft²/US gal depending on profile and build |
| Broadcast Receiver | 10–25 mils before broadcast | 145–80 ft²/US gal plus aggregate |
| Self-Levelling Build Coat | 40–250 mils in controlled pours | By design and mass control |
Application Conditions
Confirm all conditions against the current ResinTech TDS and project specification before use.
| Condition | Requirement |
| Substrate Temperature | 10–30 °C |
| Ambient Temperature | 10–32 °C |
| Relative Humidity | Maximum 85% recommended |
| Dew Point | Substrate at least 3 °C above dew point |
| Concrete Moisture | Dry concrete; typical screening limit 4% Tramex or 85% RH by ASTM F2170 |
| Concrete Age | Normally 28 days unless the designer approves earlier work |
| Minimum Concrete Strength | 3,600 psi compressive and 220 psi tensile pull-off |
System Compatibility
Confirm all system combinations against the current ResinTech TDS and project specification before use.
| System Layer | Compatible Products |
| Flexible Base (movement / “+” systems) | ResinTech FLEXCOAT-PU flexible base membrane, beneath the build — confirm against TDS |
| Reinforcement / Build | TUE may substitute for ResinTech CBE as the premium epoxy build layer — confirm against TDS |
| Surface / Topcoats | ResinTech HPP (UV-stable polyaspartic surface), CRU (premium chemical / UV finish), TCU (aliphatic urethane) — confirm against TDS |
| Not Recommended For | Immersion service; exterior or UV-exposed applications without a compatible UV-stable aliphatic topcoat — confirm against TDS |
Application Notes
Always confirm application requirements against the current TDS, SDS and project specification before use.
Frequently Asked Questions
What systems is TUE used in?
TUE is the premium epoxy reinforcement / build layer in ResinTech traffic systems (PTS, VTS and EWS), where it may be substituted for CBE, and the epoxy build layer in flake, quartz, metallic and solid-colour floor systems. See the full range of ResinTech floor coating systems at Canopus Supply. Confirm system design against the current ResinTech TDS.
Does TUE yellow under UV exposure?
TUE is more UV-resistant than ordinary epoxies and resists yellowing better than standard epoxy, but it is not a UV-stable aliphatic system. For long-term colour stability in UV-exposed or exterior applications, use a compatible UV-stable aliphatic topcoat such as ResinTech HPP, TCU or CRU. Confirm system suitability against the current TDS.
Can TUE be used on exterior surfaces?
TUE may be used in interior and protected exterior assemblies; for permanent unprotected exterior UV exposure, specify a UV-stable aliphatic topcoat over it. Confirm suitability against the current TDS and project specification.
How do I get a super high-gloss finish?
TUE cures glossy with a slight satin character. For a mirror-like, super high-gloss result, ResinTech recommends CBE (Core Bond Epoxy). Confirm finish expectations against the current TDS.
Where can I buy ResinTech TUE in BC?
ResinTech TUE is stocked at Canopus Supply in North Vancouver. Available for pickup or delivery across British Columbia. Call 250-233-3000 to confirm stock or arrange a volume order.
Technical Documentation
- Technical Data Sheet (TDS) — ResinTech TUE
- Safety Data Sheet — Part A — contact Canopus Supply
- Safety Data Sheet — Part B — contact Canopus Supply
Full technical data for specifiers and contractors. Confirm all values against the current TDS before use.
⬇ Download TDS (PDF)Trade Purchasing Note
All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.
Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.
For volume orders, system compatibility questions, pickup timing or delivery across BC, contact Canopus Supply before placing a bulk order.
Call: 1 (250) 233-3000
Email: [email protected]
Pickup: Unit 103, 185 Forester Street, North Vancouver, BC
Canopus Supply Inc. — Authorised ResinTech Distributor, Metro Vancouver & BC
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy