Lumenier QAV-RXL 2 - 8" FPV Quadcopter Frame

Lumenier QAV-RXL 2 - 8" FPV Quadcopter FrameThe Lumenier QAV RXL is back! Naturally, after the QAV R 2 launched in 2018, we started planning the next iteration of the XL, but this time we really wanted to go big! The QAV RXL 2 is available in both 8" and 10" versions. It might not be lean, but it sure is mean! The QAV RXL 2 features the same silky clear coat carbon fiber as on the QAV R 2. And while the frame closely resembles the QAV R 2, there are many notable differences other than just the

The Lumenier QAV-RXL is back! Naturally, after the QAV-R 2 launched in 2018, we started planning the next iteration of the XL, but this time we really wanted to go big! The QAV-RXL 2 is available in both 8" and 10" versions. It might not be lean, but it sure is mean!

The QAV-RXL 2 features the same silky clear coat carbon fiber as on the QAV-R 2. And while the frame closely resembles the QAV-R 2, there are many notable differences other than just the extended arm length. The QAV-RXL 2 features an extended main body to give room more for accessories and electronics. The body also features extra mounting options with both 30.5x30.5mm and 20x20mm mounting holes in the middle and rear of the frame.

A larger frame means you need tougher and thicker carbon. The QAV-RXL provides this with 6mm thick carbon fiber arms paired with a 2.5mm thick bottom plate and 2mm X-Brace below the arms to give a total of 10.5mm of carbon at the central stress points.

Both versions of the QAV-RXL 2 are made to top-mount the LiPo battery. The included silicone non-slip battery pad helps grip the LiPo and prevents any movement during the flight and or during a crash. The QAV-RXL 2 also comes with socket cap washers to protect the bottom screw heads from damage that could otherwise make the screw heads broken or unusable.

The QAV-RXL 2 is spaced 28mm between the top and bottom plates and designed for a full-size FPV camera.

Features

• Full 3K Carbon Fiber airframe with removable 6mm arms
• Premium carbon fiber sealed with a smooth clear coat layer on top
• Individually "keyed" removable arms, remove just 2 screws, and leave your stack in place.
• Carbon fiber camera side walls
• Popular Squashed-X configuration (less props in view!)
• Black Oxide steel screws
• Easy-grip black anodized spacers
• Motor guards on the end of the arms to protect the motor during a crash
• Fits both 30.5x and 20x stacks in middle and rear
• Silicone non-slip battery pad

Weight

• Airframe with Hardware, Battery Pad, and Landing Pads:
• 8" version - 205g
• 10" version - 285g

Includes

• 1x Lumenier QAV-RXL 2 Quadcopter Kit
  • 4x 6mm carbon fiber arms
  • 2mm carbon fiber top plate
  • 2.5mm carbon fiber bottom plate (with press fit steel nuts)
  • 2x carbon fiber camera side walls
  • 1x carbon fiber X-brace for 8" QAV-RXL 2
• 1x Lumenier Sticker Sheet
• 1x Set of black steel screws and aluminum hardware including knurled spacers, cable ties
• 1x No-slip silicone battery pad
• 4x Neoprene landing pads
• 4x Silicone vibration-damping o-rings

Compatibility Chart