KEEPANG PLA Filament: Various Colours For FDM 3D Printers

KEEPANG PLA Filament: Various Colours For FDM 3D PrintersKEEPANG PLA Filament is designed for FDM 3D printers, offering a wide selection of vibrant colors. Each spool is packaged in a vacuum sealed bag with desiccant to protect against moisture absorption, while the neat winding process and precise tolerances support smooth and reliable printing performance. Compatible with standard FDM 3D printers, including: Creality 3D Artillery SUNLU Geeetech Kingroon Easythreed Specifications: Filament Diameter: 1.

KEEPANG PLA Filament is designed for FDM 3D printers, offering a wide selection of vibrant colors. Each spool is packaged in a vacuum-sealed bag with desiccant to protect against moisture absorption, while the neat winding process and precise tolerances support smooth and reliable printing performance.

Compatible with standard FDM 3D printers, including:

• Creality 3D
• Artillery
• SUNLU
• Geeetech
• Kingroon
• Easythreed

Specifications:

• Filament Diameter: 1.75mm
• Dimensional Accuracy: ± 0.03mm
• Printing Temperature Range: 190°C - 230°C
• Recommended Printing Temperature: 210°C - 220°C
• Recommended Printing Speed: 30 - 100mm/s
• Base Material: Polylactic Acid (PLA) derived from plant starch sources
• Net Weight: 1kg (Filament only)
• Gross Weight: 1.3kg - 1.4kg (Including spool and packaging)

Troubleshooting Guide:

• Nozzle Clogging: Often caused by uneven feeding or insufficient heat. Ensure the nozzle is clean before printing and adjust the temperature upward if necessary to maintain consistent flow.
• Material Stringing: Typically occurs if the printing temperature is too high or retraction settings need adjustment. Lowering the nozzle temperature slightly or adjusting retraction speed can resolve stringing.
• Over-Extrusion: Can happen if the temperature is too high, print speed is too low, or slicer settings do not match the physical nozzle diameter. Adjust speed and check extrusion multiplier settings to eliminate residue.