G-Made Sawback Rear Bumper w/ Tire Carrier and Jerry Can Mount

G-Made Sawback Rear Bumper w/ Tire Carrier and Jerry Can MountFull size Steel, welded rear bumper for the G Made Sawback w Tire Carrier and Jerry Can Mount Specifications: *Note: pictures mounted on vehicle show an older version with the shackle mounts on the back of the bumper. Please see updated pictures of shackle mounts welded below bumper for best departure angle. 200mm wide Mounts using existing hardware. Steel construction Hand Made Welded. Requires minor trimming of the body (make 2 (two) 1 4" slits) Or

Specifications:

*Note: pictures mounted on vehicle show an older version with the shackle mounts on the back of the bumper. Please see updated pictures of shackle mounts welded below bumper for best departure angle.

- 200mm wide
- Mounts using existing hardware.
- Steel construction - Hand Made/Welded.
- Requires minor trimming of the body (make 2 (two) 1/4" slits) Or can be customized to be dropped for lower ground clearance. Send message with purchase if desired.
**Tire and Jerry Can Not Included

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.