Omron Timer H3CR-F8

Omron Timer H3CR-F8Key Features Specs Warranty The Omron time delay timer is a timer with an on off function that can be set in half seconds, seconds, minutes and hours. Because of its multiple settings, it is highly flexible and the most widely adopted timer for timed dosed applications in septic systems. Relay output is DPDT and volts are 100 240VAC and 100 125VDC. Rated power supply voltage 100 to 240 VAC 50 60 Hz100 to 125 VDC Ripple 20% max. (If power supply

• Key Features
  
• Specs
• Warranty

• The Omron time delay timer is a timer with an on/off function that can be set in half seconds, seconds, minutes and hours. Because of its multiple settings, it is highly flexible and the most widely adopted timer for timed dosed applications in septic systems.

  Relay output is DPDT and volts are 100-240VAC and 100-125VDC.

• Rated power supply voltage	100 to 240 VAC 50/60 Hz100 to 125 VDC Ripple 20% max. (If power supply incorporates a single-phase full-wave rectifier)
  Allowable voltage variable range	85 to 110% of the power supply voltage
  Power consumption	Approx. 10 VA (at 240 VAC)Approx. 2.1 W (at 240 VAC)
  Reset voltage	10% max. of rated supply voltage
  Number of time ranges	18
  Operation mode	Flicker OFF start
  Control output (Type)	Time-limit: DPDT
  Control output (Contact output)	Resistivity load: 250 VAC 5 A (cosφ=1)/5 A at 30 VDCMinimum applicable load: 10 mA at 5 VDC (failure level: P Reference value)
  Operating resetting	Time-limit operation/Time-limit reset or Self-reset
  Ambient temperature range	Operating: -10 to 55 ℃ (with no icing)Storage: -25 to 65 ℃ (with no icing)
  Ambient humidity range	Operating: 35 to 85%
  Accuracy of operating time	±0.2% FS max.±0.2% ±10 ms in a range of 1.2 s and 3 s

•