Simplex Control Panel 120V LPD-B

Simplex Control Panel 120V LPD-BKey Features Specs This control panel will operate a 120 VAC single phase 1 2 HP pump (or smaller). There are two circuit breakers in this control panel: A 20 Amp single pole circuit breaker for the pump, and a 10 Amp single pole circuit breaker for the alarm. The alarm is designed to be controlled with a float switch. When the float switch closes, you will be alerted by the 360 degrees top mounted red alarm light, and the loud Piezoelectric buzzer.

• Key Features
  
• Specs

• This control panel will operate a 120 VAC single phase 1/2 HP pump (or smaller). There are two circuit breakers in this control panel: A 20 Amp single pole circuit breaker for the pump, and a 10 Amp single pole circuit breaker for the alarm.
  
  The alarm is designed to be controlled with a float switch. When the float switch closes, you will be alerted by the 360 degrees top-mounted red alarm light, and the loud Piezoelectric buzzer. There are alarm test and buzzer silence-switches mounted in the door of the enclosure.
  
  This panel can be used to control a single sewage pump for a septic holding tank going into a treatment unit or pumping effluent from a low pressure dosing septic system. The enclosure’s rating provides protection from falling dirt, falling liquids, hose-directed water, and corrosive agents. It has a hinged lockable door with latches and included screws to secure the door if required. All electrical components are mounted inside the enclosure on an aluminum back plate.

  • Hinged lockable door with one latch.
  • Two circuit breakers for independent power delivery to components.
  • Demand operation using a pump-rated wide-angle float (float switch is not included).
  • Built-In Audible & Visual Alarms, with silence switch.
  • Captive terminal strip for field wiring.
• 
  

  Power	Up To 1/2 HP
  Voltage	120 VAC, single-phase
  Size	8 in x 6 in
  Material	Poly-carbonate
  NEMA Rating	4X