600-156-01 Fuel Pump for Evinrude Johnson 150HP 175HP | JLM Marine

600-156-01 Fuel Pump for Evinrude Johnson 150HP 175HP | JLM MarineFuel Pump Assembly Fits Evinrude Johnson 150HP 175HP V6 60 Outboard Motors This fuel pump assembly is designed for Evinrude and Johnson 150 HP and 175 HP V6 60 degree outboard motors equipped with VRO systems. It provides reliable fuel delivery when operating without the VRO oil injection system, ensuring consistent engine performance on the water. Direct Replacement: OEM part number 600 156 01. Complete assembly includes pump, fuel hoses, and

Fuel Pump Assembly – Fits Evinrude Johnson 150HP 175HP V6 60° Outboard Motors

This fuel pump assembly is designed for Evinrude and Johnson 150 HP and 175 HP V6 60-degree outboard motors equipped with VRO systems. It provides reliable fuel delivery when operating without the VRO oil injection system, ensuring consistent engine performance on the water.

Direct Replacement: OEM part number 600-156-01.

• Complete assembly includes pump, fuel hoses, and mounting hardware
• Features stress-relieved bracket, Gates fuel lines with Oetiker clamps, and aluminum billet machined delivery fitting
• Requires premixing oil and gas at 50:1 ratio (1 pint oil to 6 gallons gas)

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Johnson/Evinrude owners, here's a guide to help you identify your engine's serial/model: Johnson/Evinrude Serial Number Guide.

Technical Specifications

Package Contents

• 1 × Fuel Pump Assembly
• Fuel hoses with clamps
• Tie strap mounting kit

Installation Guide

1. Disconnect the battery and relieve fuel system pressure before beginning work.
2. Remove the old VRO pump assembly by disconnecting fuel lines and unbolting the mounting bracket.
3. Clean the mounting surface on the engine block to ensure a secure fit.
4. Position the new fuel pump assembly onto the mounting location and secure with provided hardware.
5. Connect the fuel inlet line from the fuel tank to the pump inlet fitting using the supplied hoses and clamps.
6. Route the fuel delivery line from the pump outlet to the engine carburetor or fuel rail, securing with clamps.
7. Use the tie straps to secure all fuel lines away from moving parts and hot surfaces.
8. Premix your fuel tank with 2-stroke oil at a 50:1 ratio (1 pint of oil per 6 gallons of gasoline).
9. Reconnect the battery and check all connections for proper seating.
10. Prime the fuel system by squeezing the primer bulb until firm.
11. Start the engine and inspect for fuel leaks at all connection points.
12. Allow the engine to run at idle for several minutes and verify smooth operation before returning to normal use.

Troubleshooting & FAQ

Q: How do I confirm this fuel pump fits my engine?
A: This pump is designed for Evinrude and Johnson 150 HP and 175 HP V6 60-degree motors. Verify your engine's horsepower, cylinder configuration, and VRO system before ordering. Check the OEM part number 600-156-01 against your engine's parts manual.

Q: Why do I need to premix oil and gas with this pump?
A: This fuel pump replaces the VRO (Variable Ratio Oiling) system and does not inject oil automatically. You must premix 2-stroke oil into your fuel tank at a 50:1 ratio (1 pint oil per 6 gallons of gas) to ensure proper engine lubrication.

Q: What is included in the package?
A: The package includes the complete fuel pump assembly, fuel hoses with Oetiker clamps, and a tie strap mounting kit as pictured.

Q: How often should I replace the fuel pump?
A: Fuel pumps typically last several seasons with proper maintenance. Replace the pump if you notice symptoms such as hard starting, loss of power, engine surging, or visible fuel leaks. Inspect fuel lines annually for cracks or deterioration.

Q: What are signs that my fuel pump is failing?
A: Common symptoms include difficulty starting, engine stalling at idle or under load, inconsistent RPM, reduced top speed, and fuel leaking from pump seals or connections.

Q: Is this an OEM part or aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.