EVERBUILD® Gun A Nail® Standard – 310ml

EVERBUILD® Gun A Nail® Standard – 310mlHigh Strength, Solvent Free Grab Adhesive for Interior Applications EVERBUILD Gun A Nail Standard is a high strength, gap filling, multi purpose building adhesive based on a tackified solvent free system. It is designed for a wide variety of building and home improvement applications where at least one of the substrates to be bonded is porous. Key Features & Benefits Solvent Free: Environmentally friendly formulation with no hazardous solvents.

High-Strength, Solvent-Free Grab Adhesive for Interior Applications

EVERBUILD® Gun A Nail® Standard is a high-strength, gap-filling, multi-purpose building adhesive based on a tackified solvent-free system. It is designed for a wide variety of building and home improvement applications where at least one of the substrates to be bonded is porous.

Key Features & Benefits

• Solvent-Free: Environmentally friendly formulation with no hazardous solvents.
• Excellent Adhesion: Adheres to most common surfaces, including damp substrates.
• High Initial Grab: Exceptional early grab properties suitable for both vertical and horizontal positions.
• Gap-Filling: High solids formulation provides excellent gap-filling properties without shrinkage.
• Extended Open Time: Allows for easy repositioning after fixing.
• Water Clean-Up: Tools and excess adhesive can be cleaned with water before curing.

Ideal For

• Bonding dado rails, architraves, and skirting boards.
• Fixing wall cladding directly to internal wall surfaces or timber battens.
• Fixing battens directly onto walls without fastenings.
• Bonding carpet gripper systems to most floors without the need for nails or tacks.
• Bonding stair nosing to concrete or wooden stairs.
• Securing aluminium or other skin panels to the framework of portable industrial buildings and caravans.

Product Details

• Colour: White
• Packaging: 310ml cartridge
• Density: 1.50 – 1.60 g/cm³
• Solid Content: 75 – 80%
• Service Temperature: -10°C to +70°C
• Open Time: Maximum 10 minutes at 23°C and 50% RH
• Curing Time: 24–48 hours depending on substrates
• Shelf Life: 24 months from date of manufacture
• Storage Conditions: Store in original unopened containers between +5°C and +25°C

Application Instructions

1. Surface Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and other contaminants. Wood, plaster, and brick may be damp but not running wet.
2. Application: Cut the tip of the cartridge, attach the nozzle, and cut an aperture to the required width. Apply using a standard sealant gun.
3. Bonding: Apply the adhesive to one surface in strips or daubs. Bring the two surfaces together immediately and apply even pressure across the bond line.
4. Repositioning: If necessary, adjust the positioning within the open time before the adhesive sets.
5. Clamping: For heavy items, provide temporary support until the adhesive has dried.

Limitations

• Not suitable for use where both surfaces are non-porous (e.g., plastic/plastic or metal/metal); use EVERBUILD® Gun A Nail® Extra in such cases.
• Not recommended for use as a mirror adhesive; use EVERBUILD® Mirror Mate® instead.
• External applications may result in slower curing; for such applications, consider using EVERBUILD® Gun A Nail® Extra.

Cleaning of Tools

Clean tools and excess adhesive immediately with water before the adhesive cures. Cured adhesive must be removed mechanically.