PlastiFix High Performance Adhesive | Dual Cartridge

PlastiFix High Performance Adhesive | Dual CartridgePlastiFix High Performance Adhesive PlastiFix High Performance Adhesive is a two component, 100% reactive structural methacrylate adhesive specifically formulated for bonding thermoplastics, thermosets, metals, and composite assemblies. Each package includes one 200 mL cartridge of PlastiFix adhesive and two mixer tips. PlastiFix High Performance Adhesive bonds a wide range of materials, including metals, Metton, PVC, fiberglass, PBT, PPO, ABS, FRT,

PlastiFix High Performance Adhesive

PlastiFix High Performance Adhesive is a two-component, 100% reactive structural methacrylate adhesive specifically formulated for bonding thermoplastics, thermosets, metals, and composite assemblies. Each package includes one 200 mL cartridge of PlastiFix adhesive and two mixer tips.

PlastiFix High Performance Adhesive bonds a wide range of materials, including metals, Metton®, PVC, fiberglass, PBT, PPO, ABS, FRT, polyurethane, epoxy, wood, RIM, nylon, polyester, acrylic, gel coats, styrene, and more. It is suitable for automotive components, heavy equipment, watercraft, electrical components, tools, appliances, computer assemblies, furniture, exterior signs, displays, and more.

An applicator gun is needed to dispense the adhesive.

Why Choose PlastiFix High Performance Adhesive?

• Broad Material Compatibility: Bonds thermoplastics, thermosets, metals, and composites
• Exceptional Strength: Provides outstanding impact, peel, and shear resistance for long-lasting structural repairs
• Smooth, Controlled Application: Applies easily with a consistent flow and non-sag formula
• Easy 1:1 Mix Ratio: Simple mixing process reduces errors and ensures consistent performance with every use
• Room Temperature Cure: Cures at room temperature with extended working time

What's Included?

• Qty: 1 | 200 mL cartridge of PlastiFix adhesive
• Qty: 2 | Mixer tips

How to Use

1. Clean part to be bonded with soap and water, then with Super Prep or EcoPrep Plastic Cleaner.
2. Bevel the edges of holes and cracks to provide more surface area and a smoother transition to the adhesive.
3. Sand surfaces around the groove with 80 grit sandpaper and radius any sharp edges. If using a reinforcing strip, clean and sand the mating surface of the strip in the same way.
4. Clean a second time with plastic cleaner. Apply adhesive liberally. Press adhesive into the sanding scratches with a body spreader or gloved finger,leaving a thin layer of adhesive on the surface. Apply the lamination strip or apply several layers of glass cloth, working adhesive into each layer. Apply more adhesive if glass cloth not fully saturated.
5. Loosely clamp parts together and let cure for 30-35 minutes at 70°F (21°C). (Increase fixture time in colder temperatures.) When loosely clamping a reinforcing strip, a small amount of adhesive should squeeze out. If not, peel off the strip and apply more adhesive to prevent a weak “dry” joint.
   Maximum strength is achieved in 24 hours.
6. Finishing: Sanded PlastiFix may be primed and painted. Epoxy primer is recommended. If filler is needed, use only epoxy based fillers over sanded PlastiFix. Do not use polyester based fillers or glazes.

Video - Heavy-Duty Truck Hood Panel Repair

Product Resources

PlastiFix High Performance Adhesive SDS

PlastiFix High Performance Adhesive TDS