Topographic Map Premium Print Vinyl Rolls (3' or 6') - Matte Finish

Topographic Map Premium Print Vinyl Rolls (3' or 6') - Matte FinishCustom printed topographic map vinyl made to order for your build 18. 5" wide rolls in 3. 25 ft or 6. 5 ft lengths cut your own templates Two material options: Air Egress (painted surfaces) or High Tack (textured plastic) UV resistant ink heavily resists fading even in daily sun exposure Matte finish clean, flat look that complements any exterior color NOTE: Premium rolls are custom printed per order and cannot be returned. Topographic Map Vinyl Wrap

• Custom-printed topographic map vinyl — made to order for your build
• 18.5" wide rolls in 3.25 ft or 6.5 ft lengths — cut your own templates
• Two material options: Air Egress (painted surfaces) or High Tack (textured plastic)
• UV-resistant ink — heavily resists fading even in daily sun exposure
• Matte finish — clean, flat look that complements any exterior color
• NOTE: Premium rolls are custom printed per order and cannot be returned.

Topographic Map Vinyl Wrap Rolls for Trucks & SUVs — Cut Your Own Designs

Topographic map vinyl has become one of the most popular custom wrap styles for off-road trucks and SUVs — and for good reason. The topo contour pattern adds a rugged, adventure-ready aesthetic to pillars, hoods, rockers, door panels, and more. StickerFab's premium topo vinyl rolls give you the raw material to cut your own templates and create designs we haven't had time to pre-cut ourselves.

This isn't off-the-shelf vinyl. Every roll is custom printed and laminated in-house at our Florida shop — one piece at a time. The result is a high-quality, long-lasting print that resists fading even when your rig sits in the sun daily. Light abrasions won't damage the ink either, making it a solid choice for vehicles that actually get used.

Available in two widths of roll length — 3.25 feet or 6.5 feet — at 18.5" wide. The 6.5 ft roll gives you a continuous non-repeating pattern across the full length, which is ideal for longer panels like hoods or bed sides. The 3.25 ft roll is perfect for pillar wraps, smaller accent panels, and trim pieces.

Material Options

Air Egress (4.45 mil)
Made by Orafol. Designed for painted surfaces, glass, and smooth plastics. Air egress channels allow bubbles to escape during installation, making this the easier material to work with. Install larger pieces wet, smaller pieces dry. Matte finish.

High Tack (7.2 mil)
Formulated for low-energy surfaces like textured plastic, rough trim, and unpainted panels. Ultra-aggressive adhesive — this will stick where standard vinyl won't. Wet or dry installs are both possible. For rougher surfaces, a dry install gives you more control. Thicker construction at 7.2 mil.

What Can You Wrap with Topo Vinyl?

The 18.5" width and your choice of length make these rolls versatile for a wide range of applications on Toyota Tacoma, 4Runner, Land Cruiser, Ford Bronco, Ranger, Ineos Grenadier, GX550, and most other trucks and SUVs:

• A, B, and C pillar wraps
• Hood accents and center strips
• Roof panel sections
• Rocker panel accents
• Door panel insets
• Bed side accents and tailgate strips
• Interior trim pieces

Print & Lamination Quality

There is inherent risk in the lamination process — minor imperfections may occasionally be present, but they are the same style prints used across our vehicle-specific topo products that have shipped without complaints. Any imperfections are non-visible at normal observation distance.

Product Features
- Custom printed & laminated in-house in North Fort Myers, FL
- UV-resistant ink — resists fading in daily sun
- Matte finish
- Air Egress: 4.45 mil, Orafol material, smooth/painted surfaces
- High Tack: 7.2 mil, low-energy surfaces, textured plastic
- Roll width: 18.5"
- Roll lengths: 3.25 ft or 6.5 ft
- Made to order — no returns

FAQ

What's the difference between Air Egress and High Tack?
Air Egress has channels built into the adhesive layer that let air escape during application — great for smooth painted surfaces and glass. High Tack has an ultra-aggressive adhesive with no channels, designed for rough or textured plastic surfaces where standard vinyl won't hold.

Which length should I choose?
The 3.25 ft roll works for pillar wraps and most accent panels. The 6.5 ft roll is better for hoods, bed sides, or any panel where you want a continuous pattern without a seam. The longer roll is more expensive because it's significantly harder to produce without defects.

Can I use this for pillar wraps on my Bronco or Tacoma?
Yes — these rolls are popular for DIY A, B, and C pillar wraps on Bronco, Tacoma, 4Runner, Land Cruiser, Grenadier, and other trucks. You cut your own template to match your pillars. If you want pre-cut pillar kits, check our vehicle-specific topo pillar products.

Can this vinyl be returned?
No. These rolls are custom printed for each order and cannot be returned. Please select your length and material carefully before ordering.

Is this the same material used in your pre-cut topo products?
Yes — same print quality and lamination process as our vehicle-specific topo pillar overlays and kits.