Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LR

Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LRSMARTER LIGHTING PRODUCT HIGHLIGHTS Dimming Z Wave control for 0 10 V LED drivers only (do NOT user with 120 V LED bulbs) Use with LED panels and fixtures with 0 10 V dimming drivers up to 150W 700 series Z Wave chip: more range, reliable coverage Long Range: if your hub implements Z Wave Long Range, you'll benefit from the latest direct device to hub communication which extends the range like never before and eliminates network lags Advanced settings

SMARTER LIGHTING

PRODUCT HIGHLIGHTS

• Dimming Z-Wave control for 0-10 V LED drivers only (do NOT user with 120 V LED bulbs)
  
• Use with LED panels and fixtures with 0-10 V dimming drivers up to 150W
• 700 series Z-Wave chip: more range, reliable coverage
  
• Long Range: if your hub implements Z-Wave Long Range, you'll benefit from the latest direct device-to-hub communication which extends the range like never before and eliminates network lags
• Advanced settings to customize minimum or maximum brightness level and more*
• Built-in signal repeater: keep your mesh network stable and your system fast
• SmartStart and S2 authenticated security for a truly protected smart home
• Installs behind the existing wall switch or at the fixture (check your wiring first and always follow the diagrams in the manual)
  
• Pigtail wires included for quicker set-up
• 5-year extended warranty when registered and tech support forever

NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub/controller needs to support advanced settings and central scene programming for you to take advantage of this feature.

PRODUCT CONDITION

We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

• NEW: brand new product, as delivered by the factory; standard warranty (extended warranty if purchased from The Smartest House or registered within 30 days).
• OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description, may not feature Z-Wave Long Range. Standard warranty (extended warranty if purchased from The Smartest House or registered within 30 days).
• REFURBISHED: good condition, may show slight signs of wear (stripped pigtails), may not include all accessories (like product manual); hardware and firmware version may be different than the brand new device description, may not feature Z-Wave Long Range. 1-year seller warranty, lifetime tech support.
• USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual) or parts of the packaging; may show signs of wear like scratches or stripped pigtails; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description, may not feature Z-Wave Long Range.

Z-WAVE FREQUENCY

This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency/region as your end devices when buying Z-Wave controllers to include products in your system without issues. If you're not sure which frequency your devices use, please contact the manufacturers first. Here is what each option stands for:

• US/CA/MX: 908.42 MHz (used primarily in the US, Canada, and Mexico, the default option for all products)
• EU/UK: 868.42 MHz (used primarily in Europe), Z-Wave Long Range is not supported for this frequency!
• AU/NZ: 921.4 MHz (used primarily in Australia and New Zealand), Z-Wave Long Range is not supported for this frequency!

SPECIFICATIONS

• Z-Wave Region: US, CA, MX / EU, UK - choose your region before adding this product to the cart
• Power: 120-240 VAC, 50/60 Hz
• Maximum Loads: 4 A, 480W at 120V, 960 W at 240V, 150 Watts LED
• Maximum A rating: 200 mA
• Z-Wave Range: Up to 300 feet line of sight or up to a mile with Long Range enabled)
• Dimensions: 1.5" tall, 1.4" wide, 0.7" deep
• Operating Temperature: 32-104° F (0-40° C)
  
• Installation: Indoor use only

RESOURCES

Download the Manual for the Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LR (PDF)

Advanced Settings

Support Portal

WORKS WITH

• Z-Box Hub (recommended for Zooz products)
• Ezlo Plus (no access to advanced parameters on Android app)
• Ezlo Secure (no access to advanced parameters on Android app)
• Home Assistant (Z-Wave JS)
• HomeSeer (with Z-Wave Plus plug-in)
  
• Homey (Zooz App for Homey)
• Hubitat (custom driver needed)
• Indigo (NOTE: no security, Indigo does not support S2 Z-Wave security)
• SmartThings (Edge driver needed)
• Vera

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

INSTALLATION

Before installing, make sure your fixture uses a 0-10 V dimming driver that doesn't exceed 150 Watts. Check your wiring first to confirm that you have all the following wires present in your electrical box: both 0-10 V driver connections, power, neutral, and load connection to power the LED driver, as well as a connection to a wall switch.

If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.

Here are some helpful wiring tips:

• Make sure the gang box you are about to install the switch has power with neutral wire available - you will not be able to get the ZEN54 Dimmer to work without a neutral wire.
• Unlike regular mechanical switches, Z-Wave switches require all of the wires to be connected exactly as indicated - line and load wires can never be swapped as it sometimes happens to the most experienced electricians.

How to include the 0-10 V Dimmer to your smart home network?
1. Put your Z-Wave controller in inclusion/pairing mode (or scan the QR code on the ZEN54 if your hub supports SmartStart)
2. Click the Z-Wave button on the relay 3 times quickly to finalize the inclusion process
3. A new dimmer switch should appear on your hub's device list