Pay in installments of $17.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 14 - Aug 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Flexx Handlebar MTB Factory-Fresh KitOur Factory Fresh kits create an easy way to service your Flexx MTB Handlebar. This kit provides you with all of the necessary parts to perform the service. The Factory Fresh Kit contains contains: 2 bolts, 2 nuts, 4 pin end caps, 1 set of igus bushings for the pivot pins, and your choice of Rebound and Compression Elastomers. Just like your suspension, elastomers do need to be freshened up. We recommend changing your elastomers yearly to be sure your
Our Factory Fresh kits create an easy way to service your Flexx MTB Handlebar. This kit provides you with all of the necessary parts to perform the service. The Factory Fresh Kit contains contains:
2 bolts, 2 nuts, 4 pin end caps, 1 set of igus bushings for the pivot pins, and your choice of Rebound and Compression Elastomers.
Just like your suspension, elastomers do need to be freshened up. We recommend changing your elastomers yearly to be sure your Flexx Handlebars are performing as intended.
Elastomers included: Soft (blue), medium (yellow), hard (red), and extra hard (black). Compression and rebound. For more elastomer info, click HERE.
Recommended Elastomer Combinations:
BLUE: XC/Gravel, youth, lightweight riders, 140lbs or less
YELLOW: XC/Trail/mild Enduro, 140-165lbs
RED: Enduro/DH, 150lbs-220lbs, most popular set up
BLACK: DH 190lbs +
- A properly tuned Flexx Handlebar should feel natural while riding, absorbing small bumps, chatter and other trail terrain that tends to make your hands and upper body more fatigued. Any diving sensation, bottoming out or "that doesn't feel right" is an indication your set up is too soft.
*The pin end caps do not need to be removed to change elastomers, use blue loctite on the nut and bolt when re-assembling
We recommend our Fiber Bushing Removal Kit if you need to replace the fiber bushing in the pivot pin.
Features
1. All-inclusive kit
Comes with everything you need to get your bar ready for another few hundred hours of ride time!
2. We will service it for you.
We will service your Flexx Handlebar for free with the purchase of our Factory Fresh Service Kit. Please call or email us for an RA# if you would like us to service your Flexx Handlebar.
3. Service it yourself
Read the steps necessary and watch our video under the Service tab above, to install your Factory Fresh kit yourself.
4. What's in the box
The Factory Fresh Kit contains contains 2 bolts, 2 nuts, 4 pin end caps, 2 sets of igus bushings for the pivot pin, and your choice of Rebound and Compression Elastomers.
How to service your Flexx MTB Handlebars
Factory Fresh Service
We offer our free Factory Fresh in-house service program for your Flexx Handlebars. This service requires you OBTAIN an RA# from us, as well as read, print and sign our Service Order Form. Next ship us your bars with the RA# and signed release form, Attn: Factory Fresh. The Factory Fresh service program for Flexx Handlebars is free with the purchase of a Factory Fresh Kit. The Factory Fresh program consists of disassembling and cleaning your Flexx Handlebars, a thorough servicing of the pivots and reassembly with a Flexx Handlebar Factory Fresh Kit. The Factory Fresh Kit contains contains 2 bolts, 2 nuts, 4 pin end caps, pivot bushings for the pivot pin, and your choice of Rebound and Compression Elastomers. Please note that this is only a clean and lube job, in no way does this make your handlebar stronger, last longer or take away any prior damage/neglect. If your Flexx Handlebar is damaged in anyway we will inform you of the damage and what your options are. We will not return damaged handlebars to you as it is a safety concern and liability to yourself.Proper Handle Resistance
Your handles may have some drag or resistance when the elastomer is removed. The drag is caused by the exacting tolerance required for the Flexx Handlebar to offer the utmost in control and reliability. Flexx Handlebar pivot points are most likely the most exacting tolerance on your entire machine and must be so. Too large of a tolerance will not the yield the precise control you as a rider require to perform at your best. It is not only acceptable but preferred to have some drag on the handles. Each side of every Flexx Handlebar System is measured with a strain gauge to be sure the resistance of each handle is within our tolerance. If your bar rebounds to its present ride height after being compressed you should be good to go. If you have any questions concerning this please contact us. *If your pivot pins are damaged they will need to be replaced. A Pivot Pin kit is an additional $20. Download the Service Order FormThe Step by Step Service Process
Two key things to remember
1) Do not mix the pivot pins up. The left pin needs to go back in the left hole, and the right pin in the right hole. We separate our pins and hone our pivot holes to .0001 of an inch. It is crucial to have proper fitment of each pin so there is not front to back play.2) The second key point is do not strike the pivot pin directly with a hammer, press, or any other tool. The best way to protect the pivot pin from "mushrooming" is to use an old M6x1.0 bolt threaded into the pivot pin. Use the bolt to push the pivot pin out.
Tools Required
- 4mm Allen Wrench - To change elastomers
- 3mm Allen Wrench - To remove pin end caps if necessary
- Blue Loctite
- Remove the elastomer nuts and bolts, then remove the elastomers.
- Remove the pin end caps with a 3mm allen.
- Now drive the pins completely out. Again, use a M6x1.0 bolt to protect the pin.
- With pins out you can press the pivot bushings out of the bore. A long 6mm socket can typically be used.
- Clean pivot bores and pins.
- Place the pivot pin in the back side of the bar, square to the bore. You will know the pin is square to the bore when it will not rock easily up, down, or to the side without applying force.
- Align the handle bore with the center section bore then press the pivot bushing through both components.
- Protecting the pivot pin with the m6x1.0 bolt threaded into it, tap the pivot pin all the way through the bore flush with the other end.
- Install the pin end caps, use blue Loc-tite on both the male and female threads. Torque the pin end caps to 4nm with a 3mm allen.
- Install the compression elastomer. Butt the 45* relief in the narrower part of the elastomer up against the handle.
- Install the rebound elastomer on the nut.
- Apply blue Loc-tite to the threads of both the bolt and nut. Only use the torx head to hold the bolt when turning the 4mm nut. The bolt will bottom out in nut, bring the handle to 5* up-sweep.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 13 reviews
Sort
Product Reviews
★★★★★ 5
Looks great, doesn't hold much so measure carefully
Color: Gray, Size: Rectangle
I got this organizer for my husband to keep his stuff by the door. While it's a little smaller than I'd hoped, it looks great in the entryway. It's super easy to snap together, but feels like the material could be damaged easily if you're not careful. He is able to store his keys, wallet, and sunglasses in it, and throws hit hat on top. Overall we are really happy with it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 31, 2026
★★★★★ 5
Perfect
Color: Blue, Size: Square
Just what I needed. The size is perfect as I didn’t want anything too large to place my watches and other accessories inside near the corner of my desk. Its size is essentially 7x7, and the design is sleek compared to other organizer holders. I got the color in blue and it looks stunning with the rest of my setup. I’m unsure about other reviewers, but mine came safely and the leather walls are decently thick, so it’s not too flimsy when buttoned together which holds very securely. There are hole spaces at the bottom corners once assembled, so if you have super small items such as beads or really small jewelry, they could potentially fall out, but most of my items are large enough that won’t be of concern. If you have a wire charger near by, the holes could be used to charge your smartphone inside, which has its own practical usage. Overall, I’d definitely recommend it if you’re on a lookout for a sleek but compact organizer holder, and I personally will consider getting another one in the future for myself for other household belongings.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 13, 2024
★★★★★ 5
Nice and Elegant.
Size: 7.7" x 7.7" x 1.7", Color: Black (Metal Glided), Size: 7.7" x 7.7" x 1.7", Color: Black (Metal Glided)
Color looks great, material is good quality and fits most of my items. It makes my items look neat and organized. Price is a bit high but worth it in my opinion.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 22, 2026
★★★★★ 5
Quite nice and very functional
Size: 7.7" x 7.7" x 1.7", Color: Grey (Metal Silvered), Size: 7.7" x 7.7" x 1.7", Color: Grey (Metal Silvered)
Elegant and substantial - this valet catch all for your night stand or dresser is quite nice and very sophisticated. Sleek and soft brushed suede like material. It was packed well, and is quite nice to keep miscellaneous items corralled together. I’m very pleased and would recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2025
★★★★★ 5
Perfect size, high quality
Size: 7.7" x 7.7" x 1.7", Color: Black (Metal Silvered)
I had a previous catch all tray that I bought on amazon, it used buttons on the 4 corners to turn a flat cardboard into a tray. Over time, the catch all tray got filled up, not just with a wallet, keys and eyeglasses but eventually business cards and other knick knacks. With all the items inside the tray, sometimes the buttons would start to pop out. It wasn't awful, more of an annoyance. But it was time for me to find a more durable tray. I looked on amazon and added 6 different trays that had "potential" into my shopping cart. Then I carefully evaluated each one and deleted them out of my cart until there was only one left. Some had multiple compartments. Some were larger than this one. I felt the ones with compartments would limit my ability to put the things I want in there. Also, I didn't want it so big that it took up too much desk space. Ultimately, I felt this was the perfect size. I'm extremely happy with it, the quality is really nice and it looks and feels durable. No more loose buttons and spilled knick knacks.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 14, 2024