Whale Tail Hydrofoil Stabilizer – Fits 9.9-40 HP Outboard Motors (Replaces SE200, FO2002)

Whale Tail Hydrofoil Stabilizer – Fits 9.9-40 HP Outboard Motors (Replaces SE200, FO2002)Whale Tail Hydrofoil Stabilizer Fits 9. 9 40 HP Outboard Motors This hydrofoil stabilizer is designed for outboard motors from 8 to 40 HP, including both 2 stroke and 4 stroke models. It enhances performance by improving handling, providing better maneuverability, cutting planing time, and helping maintain plane at lower speeds. This part is a direct replacement for the following part numbers: SeaSierra FO2002, NorthBoat FO2003, SE Sport SE200,

Whale Tail Hydrofoil Stabilizer – Fits 9.9-40 HP Outboard Motors

This hydrofoil stabilizer is designed for outboard motors from 8 to 40 HP, including both 2-stroke and 4-stroke models. It enhances performance by improving handling, providing better maneuverability, cutting planing time, and helping maintain plane at lower speeds.

This part is a direct replacement for the following part numbers: SeaSierra FO2002, NorthBoat FO2003, SE Sport SE200, StingRay Classic JR2, and UanofCn FO2002.

• Installation Method: Bolt-on installation requires drilling directly into the anti-cavitation plate.
• Material: Constructed from UV-resistant, marine-grade Nylon PA66 plastic for durability.
• Engine Compatibility: Fits a wide range of outboard brands from 8 to 40 HP.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here’s a guide to help you identify your engine’s serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Confirm your engine model/year in the table below. For Mercury owners, here’s a guide to help you identify your engine’s serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

Confirm your engine model/year in the table below. For Johnson/Evinrude owners, here’s a guide to help you identify your engine’s serial/model: Johnson Serial Number Guide.

Confirm your engine model/year in the table below. For Suzuki owners, You can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.

Note: Will also fit most outboards and stern drives larger than 40 HP except Mercury 40, 50, and 60 four strokes. There are also some smaller outboards (down to 4 HP) that it will fit.

Technical Specifications

Package Contents

• 1 x Hydrofoil Stabilizer (FO2002)
• 4 x Sets of Stainless Steel Screws and Nuts
• 1 x 6.5mm Drill Bit
• 1 x Installation Instruction

Installation Guide

1. Position the hydrofoil onto the center of the anti-cavitation plate of your outboard motor.
2. Ensure the hydrofoil is properly aligned and mark the positions for the four mounting holes.
3. Carefully drill the four holes using the provided 6.5mm drill bit.
4. Place the hydrofoil back onto the plate, aligning the holes.
5. Insert the stainless steel screws from the top and secure them with the nuts from the bottom.
6. Tighten all four sets of screws and nuts firmly to ensure a secure fit.

Troubleshooting & FAQ

Q: How do I know if this hydrofoil will fit my motor?
A: This stabilizer is designed for most outboard motors in the 8-40 HP range. Review the compatibility table to confirm fitment for your brand. While it can fit some smaller (down to 4 HP) and larger (over 40 HP) motors, you must measure your anti-cavitation plate to ensure it can accommodate the hydrofoil's dimensions of 13.39" × 13.7". Important: It will not fit Mercury 40, 50, or 60 HP four-stroke models.

Q: What tools are required for installation?
A: Installation requires drilling into your motor's anti-cavitation plate. The package conveniently includes all necessary mounting hardware: four sets of stainless steel screws and nuts, and a 6.5mm drill bit.

Q: What are the main benefits of installing a hydrofoil?
A: A hydrofoil gets your boat on plane faster, keeps it on plane at lower speeds (saving fuel), and improves overall stability and maneuverability. It reduces porpoising and chinewalking for a smoother, safer ride.

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.