,
and
Promo Codes Available:
The Go Power! AIC Series 2000-Watt Advanced Inverter Charger is a powerful all-in-one off-grid solution that combines an inverter, battery charger, and transfer switch in a sleek, low-profile package. When AC power is available from shore or generator, it recharges your house batteries with up to 100 amps and seamlessly passes excess AC power to run downstream appliances. When AC power is disconnected, it efficiently converts 12V DC battery power into 2000 watts of clean, reliable 120V AC electricity. Featuring built-in mobile app connectivity, PowerTrak compatibility, and a 3-year warranty, this UL-certified unit is ideal for RVs, vans, boats, cabins, and other mobile off-grid applications.
Key Features & Benefits
All-in-One 3-in-1 System: Combines a 2000W pure sine wave inverter, a 100A multi-stage battery charger, and a 30A automatic transfer switch in a single unit, simplifying installation and saving valuable space.
100A Battery Charger: Delivers rapid, multi-stage charging (Bulk, Absorption, Float, Equalize) to restore your battery bank quickly and efficiently, with external temperature sensor compensation for optimal charging in any climate.
30A Built-in Transfer Switch: Automatically switches between incoming AC power and inverter power in <20ms, providing seamless, uninterrupted operation of your appliances without manual intervention.
Pure Sine Wave Output: Produces clean, stable AC power with <3% THD, ensuring sensitive electronics like TVs, laptops, and medical devices operate safely and efficiently.
PowerTrak Compatible & Mobile App Connectivity: Uses built-in RV-C communication to interact with PowerTrak products (lithium batteries, battery manager kit, Dometic MPPT solar controllers). Monitor solar stats, battery levels, and power consumption in real time via the Go Power! Connect / Dometic Power app.
High Surge Capacity: Delivers 4000W for 200ms, 3400W for 5 seconds, and 2900W for 5 minutes – reliably starting demanding motor-driven loads like refrigerators, pumps, and power tools.
Comprehensive Protections: Guards against AC over/under voltage, AC over/under frequency, AC overcurrent, AC output overload/short circuit, DC over/under voltage, and over-temperature for long-term reliability.
Power Sharing Mode: Automatically reduces battery charge current when high AC loads are present, preventing overload of the input breaker (generator or shore power) and optimizing available power.
Low Power Consumption Modes: Uses <25W in no-load operation, <15W in standby, and <2W in hibernation mode – preserving battery power when full inverter output isn't needed.
Easy to Install: Lightweight design (20.6 lbs) with multiple approved mounting orientations, push-in cage clamp AC terminals, and clear labeling for straightforward DIY or professional installation.
3-Year Warranty: Backed by Go Power!'s comprehensive 3-year limited warranty for peace of mind.
Technical Specifications
| Specification | Detail |
|---|---|
| Manufacturer | Go Power! |
| Model | AIC-2000-12-SL |
| Inverter Continuous Power | 2000 W |
| Surge Power (200 ms) | 4000 W |
| Surge Power (5 sec) | 3400 W |
| Surge Power (5 min) | 2900 W |
| Nominal DC Voltage | 12 VDC |
| Output Voltage | 120 VAC (programmable) |
| Output Frequency | 60 Hz (programmable) |
| Output Waveform | Pure Sine Wave |
| THDV | < 3% @ Nominal Voltage |
| Peak Efficiency | > 85% |
| No Load Power Consumption | < 25 W @ 12.5 VDC |
| Stand-By Power Consumption | < 15 W @ 12.5 VDC |
| Hibernation Mode Consumption | < 2 W @ 12.5 VDC |
| Max Charging Current | 100 A |
| Multi-stage Charging | Bulk, Absorption, Float, Equalize |
| Temperature Compensation | External sensor: -25 mV/°C |
| Power Factor Correction | > 0.98 (1 C) |
| AC Input Voltage Range | 65-140 VAC |
| AC Input Frequency Range | 55-65 Hz |
| Max AC Input Current (Pass-through) | 30 A |
| Transfer Time | < 20 ms |
| HBCO / HBCI | 16.5 / 15 VDC |
| LBCO / LBCI | 10.5 / 12.5 VDC (programmable) |
| Max DC Input Voltage | 17 VDC |
| Operating Temperature (without derating) | -20°C to 40°C (-4°F to 104°F) |
| Operating Temperature (with derating) | -20°C to 60°C (-4°F to 140°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Relative Humidity | 5% to 95% non-condensing |
| Certifications | FCC Class B, ICES-003 Class B, UL 458, CSA 107.1, ABYC A31, ABYC E11 |
| Warranty | 3 years |
Mechanical Specifications
| Specification | Detail |
|---|---|
| Dimensions (L x W x H) | 19.7 x 11.3 x 4.4 in (499 x 288 x 112 mm) |
| Net Weight | 20.6 lbs (9.34 kg) |
| Recommended DC Cable Size | 2/0 AWG |
| Recommended DC Fuse | 300 A Class T |
| Recommended DC Install Kit | GP-DC-KIT4 |
| Recommended AC Wire Size | 10 AWG |
| Recommended AC Breaker Size | 30 A |
Included Parts
| Item | Quantity |
|---|---|
| Advanced Inverter/Charger | 1 |
| Battery Temperature Sensor | 1 |
| Pre-installed DC Terminal Flange Nut (M10) | 2 |
| Pre-installed Ground Terminal Nut (M10) | 1 |
| DC Terminal Lugs: M10 (3/8") | 2 |
| Power Disconnect Harness (84283) | 1 |
Product Documents
Spec Sheet: Download PDF
User Manual: Download PDF