AudioQuest PowerQuest 505 Power ConditionerPlease Call or Email us to place your orders! AudioQuest PowerQuest 505 Power Conditioner at Vinyl Sound Toronto Canada The PowerQuest 505 (PQ 505) is a 12 outlet rack mountable power conditioner and non sacrificial surge protector from AudioQuest (San Luis Obispo, California, USA), available at Vinyl Sound in Toronto, Canada. Designed by AudioQuest Senior Director of Engineering Garth Powell, the authority behind the award winning Niagara Series, the

Please Call or Email us to place your orders!

AudioQuest PowerQuest 505 Power Conditioner at Vinyl Sound Toronto Canada

The PowerQuest 505 (PQ-505) is a 12-outlet rack-mountable power conditioner and non-sacrificial surge protector from AudioQuest (San Luis Obispo, California, USA), available at Vinyl Sound in Toronto, Canada. Designed by AudioQuest Senior Director of Engineering Garth Powell, the authority behind the award-winning Niagara Series, the PQ-505 advances beyond the PowerQuest 303 by adding dual Ultra-Linear Noise-Dissipation addressing both Differential-Mode (30kHz to 1GHz) and Common-Mode (30kHz to 100MHz) AC noise at more than -22dB. Where the 303 addresses noise between the hot and neutral conductors only, the 505 simultaneously targets the symmetrical noise induced across all three AC leads by cell towers, broadcast signals, and ambient RF sources. The included AudioQuest PQ-715 power cable further separates the 505: equipped with ZERO-Tech for uncompressed current transients and RF/ND-Tech for unprecedented noise dissipation in its Semi-Solid Concentric Long-Grain Copper conductors, the PQ-715 is a meaningfully higher-performance cable than the PQ-415 supplied with the 303. Non-sacrificial surge protection rated to 6000V/3000A, Extreme Voltage Shutdown at 140VAC, 12 application-optimized outlets across eight Ultra-Linear-Filtered source outlets and four High-Current outlets, and included 2RU rack ears round out a complete, rack-ready AC power management system. Reviewed by Fairaudio's Michael Bruss as delivering "refinement and punch" with "more transient snap and presence along with unambiguously greater bottom-end impact and control," and honored with Lite Magazin's Recommended Award.

Dual Ultra-Linear Noise-Dissipation: Differential and Common-Mode Filtration

The key technical advancement of the PowerQuest 505 over the PowerQuest 303 is the addition of a dedicated Common-Mode filter alongside the Differential-Mode filter shared by both models. Differential-Mode noise rides asymmetrically between the hot and neutral AC conductors and is primarily generated by switching power supplies inside the system's own components, backwashed onto the shared power line and recirculated into neighboring devices. The 505's Differential-Mode filter covers 30kHz to 1GHz at more than -22dB. Common-Mode noise is an entirely different category: it rides symmetrically on both AC conductors simultaneously, relative to ground, and is typically induced by external RF sources that the AC line, neutral, and ground leads pick up like antennas. Cell towers, AM and FM broadcast transmitters, Bluetooth, and shortwave signals are the primary contributors. The 505's Common-Mode filter covers 30kHz to 100MHz at more than -22dB. Together, these two filters cover 19 octaves of Ultra-Linear Noise-Dissipation, addressing both internal system-generated noise and externally induced RF contamination in a single unit. Both filters are linearized for dynamic, rising line impedance with frequency, ensuring no added impedance restricts instantaneous current delivery to amplifiers and powered speakers during dynamic peaks. Independent measurements by Alpha Audio confirmed the noise reduction is real and audible.

The PQ-715 Power Cable: ZERO-Tech and RF/ND-Tech

Every PowerQuest 505 ships with the AudioQuest PQ-715, a 2-metre, 15A RF-noise-dissipating power cable that is a substantive upgrade over the PQ-415 included with the PowerQuest 303. The PQ-715 is built with Semi-Solid Concentric Long-Grain Copper (LGC) conductors and incorporates two AudioQuest cable technologies not found in the PQ-415. ZERO-Tech achieves zero characteristic impedance in the power cable, eliminating the electrostatic field between the cable's conductors and enabling uncompressed current transients to pass from the wall to the conditioner without restriction. RF/ND-Tech applies additional noise-dissipation through a 0.5% silver-plated conductor layer that minimizes the RF noise the power cable itself picks up and re-introduces into the conditioner's input. All conductors are direction-controlled for optimal noise drainage. The flat-to-wall plug seats flush against the wall behind furniture and rack units for tidy, low-depth installations. Including the PQ-715 rather than a generic IEC cord means the PowerQuest 505 arrives as a comprehensively engineered system, with its power feed cable and internal conditioning working in concert.

Non-Sacrificial Surge Protection and Extreme Voltage Shutdown

Conventional surge protectors use metal oxide varistors (MOVs) that degrade with each surge event, eventually losing protection capacity while the unit continues to operate normally. The PowerQuest 505 uses a non-sacrificial circuit architecture with no components that wear under surge conditions. AudioQuest tests the PQ-505 at 6000V and 3000A, the maximum surge levels that can survive a building's AC electrical panel, repeatedly, with no component degradation. The joule rating is unlimited precisely because no energy-absorbing sacrificial device is being consumed. The Extreme Voltage Shutdown circuit provides a complementary layer of protection by monitoring incoming AC line voltage continuously. When voltage rises to 140VAC, whether from a grid fault, a neutral wire failure, or a storm event, the circuit activates the main power relay to disconnect all 12 outlets within 0.25 seconds, illuminating the red front-panel Overvoltage Protection LED. The relay resets automatically once line voltage returns to a safe range.

Application-Optimized 12-Outlet Layout

The PowerQuest 505's 12 outlets are organized into two banks matched to the fundamentally different power-delivery requirements of source components and amplification devices. The eight Ultra-Linear-Filtered outlets serve constant-current source components: TVs, projectors, network streamers, DACs, disc players, phono stages, computers, modems, and routers. These components have stable, predictable current demands and benefit most from broadband AC noise filtration across both Differential and Common modes. The four High-Current outlets serve variable-current amplification components: power amplifiers, integrated amplifiers, AV receivers, powered speakers, and subwoofers. These components demand sudden large bursts of current during musical transients, and restricting that current delivery with a standard noise filter would compress dynamic headroom. AudioQuest's linearized High-Current outlets provide filtered AC without added impedance that would limit instantaneous current delivery during peaks.

Key Features

• Ultra-Linear Dual Noise-Dissipation, more than -22dB: Differential-Mode filter covers 30kHz to 1GHz; Common-Mode filter covers 30kHz to 100MHz. Together delivering 19 octaves of class-leading broadband noise reduction, linearized to preserve dynamic headroom on High-Current outlets.
• Non-Sacrificial Surge Protection (6000V/3000A, unlimited joule rating): No MOV components to degrade. Withstands repeated maximum-rated input surges without any protection loss and never needs to be replaced.
• Extreme Voltage Shutdown at 140VAC: Disconnects all 12 outlets within 0.25 seconds when incoming voltage reaches 140VAC, with automatic reset and front-panel red Overvoltage Protection LED indicator.
• 8 x Ultra-Linear-Filtered Source Outlets: For TVs, projectors, network streamers, DACs, disc players, phono stages, computers, modems, and routers. Full dual-mode Ultra-Linear filtration for constant-current components.
• 4 x High-Current Outlets: For power amplifiers, integrated amplifiers, AV receivers, powered speakers, and subwoofers. Filtered AC without added impedance to preserve dynamic headroom and instantaneous current delivery.
• Included AudioQuest PQ-715 Power Cable (2m, 15A): RF-noise-dissipating cable with Semi-Solid Concentric LGC conductors, ZERO-Tech for uncompressed current transients, RF/ND-Tech for unprecedented noise dissipation, direction-controlled, with flat-to-wall plug.
• Included 2RU Rack Ears: Attach directly to the PQ-505 chassis for immediate installation in any standard 19-inch AV or custom installation rack, with no additional hardware required.
• Lite Magazin Recommended Award: Honored by Lite Magazin's editors following Fairaudio reviewer Michael Bruss's assessment praising the 505's "refinement and punch" and "unambiguously greater bottom-end impact and control."

Technical Specifications

Awards and Critical Recognition

• Lite Magazin, Recommended Award: reviewer Volker Frech writes that the 505 makes "the entire musical experience sound more gripping, fresher, and more vibrant," with "playback cleaner and more transparent" and "resolution finer."
• Fairaudio.de, reviewed by Michael Bruss: praised for "a calm, quiet overall presentation" with "more transient snap and presence along with unambiguously greater bottom-end impact and control" versus a reference power strip.

Frequently Asked Questions

What is the AudioQuest PowerQuest 505?

The AudioQuest PowerQuest 505 is a 12-outlet rack-mountable power conditioner and non-sacrificial surge protector designed by Garth Powell. It delivers dual Ultra-Linear Noise-Dissipation of more than -22dB through both a Differential-Mode filter (30kHz to 1GHz) and a Common-Mode filter (30kHz to 100MHz), covering 19 octaves of broadband noise reduction. It features non-sacrificial surge protection rated to 6000V/3000A with an unlimited joule rating, Extreme Voltage Shutdown at 140VAC, eight Ultra-Linear-Filtered source outlets, four High-Current outlets, the AudioQuest PQ-715 power cable with ZERO-Tech and RF/ND-Tech, and included 2RU rack ears. It is available at Vinyl Sound in Toronto, Canada.

How does the AudioQuest PowerQuest 505 compare to the PowerQuest 303 or the Furman Elite-15 PF i?

The PowerQuest 505 upgrades over the PowerQuest 303 in two decisive ways: it adds a dedicated Common-Mode filter (30kHz to 100MHz, more than -22dB) addressing the RF noise that the 303's Differential-Mode-only filter cannot touch, and it ships with the PQ-715 power cable featuring ZERO-Tech and RF/ND-Tech rather than the 303's PQ-415. Both models share the same 12-outlet layout, non-sacrificial surge protection, Extreme Voltage Shutdown, and rack-mount form factor. Compared to the Furman Elite-15 PF i, the PQ-505 uses non-sacrificial surge protection with no MOV components to degrade over time, whereas Furman's Series Multi-Stage Protection uses a combination of series-mode surge protection and MOV devices. The PQ-505's dual-mode Ultra-Linear filter addressing both Differential and Common-Mode noise at more than -22dB each represents a broader noise-management specification than Furman's Linear Filtering Technology in the Elite-15 PF i.

What is the difference between the PQ-715 cable included with the 505 and the PQ-415 cable included with the 303?

Both cables use Semi-Solid Concentric Long-Grain Copper conductors and direction-controlled construction, but the PQ-715 adds two AudioQuest cable technologies absent from the PQ-415. ZERO-Tech achieves zero characteristic impedance in the power cable, eliminating the electrostatic field between conductors and delivering fully uncompressed current transients from the wall outlet to the conditioner's input. RF/ND-Tech applies 0.5% silver plating to the copper conductors to improve noise dissipation, minimizing the RF energy the cable itself inducts from the environment before it reaches the conditioner. These additions make the PQ-715 a meaningfully higher-performance feed cable that complements the PQ-505's more advanced internal filtration.

What is Common-Mode noise and why does only the PowerQuest 505 address it within this rack series?

Common-Mode noise is RF interference that appears simultaneously on both the hot and neutral AC conductors relative to ground, as opposed to Differential-Mode noise which appears only between hot and neutral. Common-Mode noise is primarily induced externally: cell towers, AM and FM broadcast stations, Bluetooth devices, and shortwave transmitters all radiate RF energy that the AC wiring in a home picks up like an antenna. A Differential-Mode filter cannot reduce this type of noise because it only targets voltage differences between hot and neutral conductors; Common-Mode noise, riding equally on both, passes through a Differential-only filter unattenuated. The PowerQuest 303 addresses Differential-Mode only. The PowerQuest 505 adds the dedicated Common-Mode filter, making it the entry point in the rack-format PowerQuest series for systems in locations with significant external RF exposure, such as urban environments with dense cell tower coverage.

Does the PowerQuest 505 restrict current to connected amplifiers?

No. Both the Ultra-Linear-Filtered source outlets and the High-Current outlets are linearized for dynamic, rising line impedance with frequency. This means the filter circuits do not add meaningful AC line impedance during the high-demand instantaneous current bursts that power amplifiers and powered subwoofers require during loud musical passages. The four dedicated High-Current outlets are further optimized for variable-current components, ensuring that dynamic headroom is preserved even when demanding amplifiers draw well above their idle current levels during musical peaks.

Where can I buy the AudioQuest PowerQuest 505 in Toronto or Canada?

The AudioQuest PowerQuest 505 is available in Toronto, Canada at Vinyl Sound, an authorized AudioQuest dealer. You can purchase it in store or through the Vinyl Sound online store at vinylsound.ca, with shipping available across Canada.

Is the PowerQuest 505 compatible with Canadian electrical systems?

Yes, the PowerQuest 505 North America model is fully compatible with Canadian 120V/15A electrical systems. The included PQ-715 power cable is rated at 15 amps at 120V and terminates with a standard North American 3-prong plug compatible with Canadian wall outlets and power panels. The Extreme Voltage Shutdown threshold of 140VAC is calibrated to North American nominal voltage standards.

How does the PowerQuest 505 install in a rack, and how long does it take?

Installation is straightforward. The 2RU rack ears ship in the box and attach directly to the PowerQuest 505's chassis using the provided hardware, requiring no additional brackets or adapters. The unit then slides into any standard 19-inch AV rack or custom installation rack and secures with rack screws. The included PQ-715 power cable's flat-to-wall plug seats flush against the wall or rear panel of the rack enclosure, keeping the cable routing tidy and minimizing installation depth. AudioQuest describes the complete process as taking just minutes from unboxing to operational, which is particularly relevant for custom installers fitting multiple units into a single rack.