Evercoat Poly-Flex Polyester Plastic putty stopper 880ml

Evercoat Poly-Flex Polyester Plastic putty stopper 880mlEvercoat Poly Flex Polyester Glazing Putty 880ml A flexible polyester glazing putty designed for spot filling and skim coating over repair areas on flexible bumpers and plastic parts. Its flowable viscosity is ideal for filling minor imperfections such as sand scratches, nicks, dings and gouges. Poly Flex may also be used to skim coat over repair areas or large surface areas that have the original paint still intact. Blue cream hardener included. FOR

Evercoat Poly-Flex Polyester Glazing Putty 880ml

A flexible polyester glazing putty designed for spot filling and skim coating over repair areas on flexible bumpers and plastic parts. Its flowable viscosity is ideal for filling minor imperfections such as sand scratches, nicks, dings and gouges. Poly-Flexâ„¢ may also be used to skim coat over repair areas or large surface areas that have the original paint still intact. Blue cream hardener included.

FOR PROFESSIONAL USE ONLY

Highly flexible glazed polyester putty for filling and finishing small damages, deep sanding scratches and micro holes on plastic elements.

SUBSTRATES

Exceptional adhesion to various types of sanded substrates such as: hard plastics, flexible plastics, plastic composites, SMC, polyester putties.

NOTE: When using thermo-plastic i.e. PP, keep as much of the original material as possible and oxidize the surface using flame/fire

PREPARATION

Before sanding, clean the repair surface thoroughly, removing dirt, grease and wax residue. Lightly sand the repaired surface with P80-P180. Use abrasive materials to remove scratches caused by sanding P180-P220. Remove dust. The repaired surface must be dried before applying the product.

MIXING

The mixing factor is 2% by weight. Place the required amount of material on a clean, degreased putty mixing pallet and add 2% hardener. Refer to the illustration on the product lid and select the appropriate amount. Mix the material to obtain a uniform mass of uniform color. Use only EVERCOAT hardener.

APP

First, apply a very thin layer of the mixed material and press it firmly onto the repair surface. This ensures optimal application with exceptional adhesion and no holes. Increase the required repair depth by layering the product.

SANDING / FINISHING

Typically, the sanding process can be started after 20-25 minutes. Sand the product with grit P180 – P320, avoiding deep sanding marks and scratches beyond the repair surface.