TEKTELIC TUNDRA with Temperature Probe — LoRaWAN Pipe & Surface Sensor

TEKTELIC TUNDRA with Temperature Probe — LoRaWAN Pipe & Surface SensorTEKTELIC at INNON TUNDRA + Probe Technical Documents Everything you need before and after commissioning. Spec sheet, user guide, and integration resources all hosted directly so you can share links with your team or drop them into your project documentation. Spec Sheet Full specs with probe temperature range, IP67, 15 year battery, accuracy. Download PDF User Guide Commissioning probe connection, LoRaWAN onboarding, configuration. Download PDF INNON

← TEKTELIC at INNON® / TUNDRA + Probe

A Ready For Anything® building block

TUNDRA base unit with 1.5m temperature probe included — ready to deploy on pipe surfaces, in ducts, or in immersion pockets without a separate probe order.

-40°C to +70°C · IP67 · 15-year battery · 1.5m probe included · LoRaWAN EU868

When to specify this variant

Order the TUNDRA + Probe bundle when the measurement point is a pipe surface, duct, immersion pocket, or any location where the sensor body cannot sit at the measurement point. The 1.5m probe bridges the gap — sensor body mounts on the wall, probe clips to the pipe or sits in the pocket.

All TUNDRA specifications apply. Probe is pre-connected and tested at dispatch — no site wiring required beyond positioning.

Why the TUNDRA with Probe is Ready For Anything®

🟢 Ready for Today

• NTC probe — pipe surface and ambient readings, ±0.5°C — measure flow and return pipe temperatures in a plant room without a wired PT100 or thermistor input
• Dual temperature reporting in one uplink — internal ambient and probe temperature reported together; two BACnet analog input objects from one device address, one LoRaWAN slot
• Battery powered, no wiring required — clip the probe to the pipe, mount the sensor, commission via the KONA gateway; no cable run, no wiring centre change, no electrician
• Up to 10 years battery life — deploy once, leave it running; no annual battery replacement in a live plant room

🔵 Ready for Change

• Probe is a separate accessory — start with ambient monitoring on the base unit, add the probe when the application requires it without replacing the sensor body
• Deploy exactly where measurement is needed — no cable constraint means the measurement point goes where the engineering requires, not where the nearest wiring centre happens to be

🔐 Ready for Security

• AES-128 LoRaWAN encryption — sensor data encrypted end to end from device to KONA gateway
• Battery operation removes mains dependency — sensor continues to report through a mains outage as long as the KONA gateway has battery backup active

🔗 Ready for Integrations

• LoRaWAN Class A — EU868, US915, AU915 — pairs with TEKTELIC KONA Micro or Enterprise gateways
• BACnet output via KONA embedded LNS — probe temperature maps to a BACnet analog input object in Niagara; use it in a heating control sequence like any wired sensor
• Practical applications — flow and return on heating circuits, cold store pipe, duct surface temperature where cable routing is not viable

For commissioning support or probe compatibility queries contact [email protected].