Pay in installments of $8.62 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 23 - Aug 28
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Pololu 5V, 9A Step-Down Voltage Regulator D24V90F5This synchronous switching step down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V while allowing a typical continuous output current of up to 9 A. Typical efficiencies of 80% to 95% make this regulator well suited for higher power applications like powering motors or servos, while high efficiencies are maintained at light loads by dynamically changing the switching frequency, and an optional shutdown pin
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V while allowing a typical continuous output current of up to 9 A. Typical efficiencies of 80% to 95% make this regulator well suited for higher-power applications like powering motors or servos, while high efficiencies are maintained at light loads by dynamically changing the switching frequency, and an optional shutdown pin enables a low-power state with a current draw of a few hundred microamps.Features
- Input voltage: 5 to 38 V (see below for more details on the regulator’s dropout voltage, which affects the low end of the operating range)
- Fixed 5 V output (with 4% accuracy); this can be lowered by adding an external resistor between FB and VOUT
- Typical maximum continuous output current: 9 A
- Integrated reverse-voltage protection, over-current protection, over-temperature shutoff, soft-start, and under-voltage lockout
- Typical efficiency of 80% to 95%, depending on input voltage and load; the switching frequency automatically changes at light loads to maintain high efficiencies
- 800 μA typical no-load quiescent current; can be reduced to 10 µA to 20 µA per volt on VIN by disabling the board
- “Power good” output indicates when the regulator cannot maintain its set output voltage
- Compact size: 1.6″ × 0.8″ × 0.3″ (40.6 × 20.3 × 7.6 mm)
- Four mounting holes for #2 or M2 screws
- Smaller holes for 0.1″ header pins and larger holes for terminal blocks offer several options for connecting to the board
Using the regulator
This boost regulator has six connections: input voltage (VIN), ground (GND), output voltage (VOUT), feedback (FB), ENABLE, and power good (PG).
The input voltage, VIN, powers the regulator and can be supplied with voltages up to 38V. The effective lower limit of VIN is VOUT plus the regulator’s dropout voltage, which varies approximately linearly with the load from around 500 mV to 1.5 V (see below for graphs of dropout voltages as a function of the load).
The output voltage, VOUT, is set to 5V by default. The output voltage can optionally be lowered by adding a resistor between the FB pin and VOUT as detailed in the Decreasing the output voltage section below.
The regulator is enabled by default: a 100 kΩ pull-up resistor on the board connects the ENABLE pin to reverse-protected VIN. The ENABLE pin can be driven low (under 0.6 V) to put the board into a low-power state. The quiescent current draw in this sleep mode is dominated by the current in the pull-up resistor from ENABLE to VIN and by the reverse-voltage protection circuit, which will draw between 10 µA and 20 µA per volt on VIN when ENABLE is held low. If you do not need this feature, you should leave the ENABLE pin disconnected.
The “power good” indicator, PG, is an open-drain output that goes low when the regulator’s output voltage falls below 90% of what it is set to (i.e. 4.5 V with the default 5 V output setting). An external pull-up resistor is required to use this pin.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 20 reviews
Sort
Product Reviews
★★★★★ 5
Perfect
Size: 9, Color: Black
These are my second pair of heels from Allegra K, I originally got the nude pair, and after wearing those all night I had to buy a black pair! I don’t use heels so these were comfortable enough to last me all night while still looking nice instead of using flats!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 25, 2021
★★★★★ 5
Stop looking! You found them!
Size: 11, Color: Black, Size: 11, Color: Black
Love love love these shoes. I am veryyy pregnant and heavy (as you can see in the pic). I used them for a wedding (all day long) and they were so comfortable (and I am not used to wearing heels). The size was perfect. I recommend them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 25, 2021
★★★★★ 1
CHEAPLY MADE!
Size: 10, Color: Beige
These are very cheaply made, and they look like it. The ties don’t even have hymned/sown sides.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 21, 2025
★★★★★ 5
SMALL STRETCH STUNNING BRACELET
Color: GOLD METAL
I wear the silver one every day and even in shower never take it off and LOVE it - just purchased two gold bracelets for graduation gifts !! they are beautiful on
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026
★★★★★ 5
Really nice looking.
Color: GOLD METAL
I was looking for something dainty and rich looking. This bracelet was perfect and even more perfect when I saw it in person. I hope it stands up to time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 29, 2025
recommand products
16 Gauge 1-1/2" STAINLESS STEEL Angle Brad Nails - Spotnails 16112FNS (8,000 Finish Nails)
199.48
15 Gauge 1-3/4" Galvanized Straight Brad Nails - Spotnails 1514PG (25,000 Brads)
176.69
N Series 16 Gauge Medium Crown 5/8" Staples - Spotnails 6605PG (10,000)
36.29
16 Gauge 2" Galvanized Brad Nails - Spotnails 16132 (8,000 Brads) 8 Clamshells
73.69
16S5 GSI16 Type Medium Crown 16 Gauge 1-1/4" DIVERGENT Staples - Spotnails 5640DG
96.69