Pay in installments of $2.56 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 25 - Sep 30
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
XVLA335Main Range of product Harmony XVL Product or component type LED pilot light with integral lens cap Component name XVL Mounting diameter 12 mm Light source Covered LED Light block colour Yellow Protection type Integral ballast resistor Built in by diode [Us] rated supply voltage 24 V IP degree of protection IP65 (with seal XVLZ912) conforming to IEC 60529 IP65 (with seal XVLZ912) conforming to NF C 20 010 IP40 conforming to IEC 60529 IP40 conforming to
Main
| Range of product | Harmony XVL |
| Product or component type | LED pilot light with integral lens cap |
| Component name | XVL |
| Mounting diameter | 12 mm |
| Light source | Covered LED |
| Light block colour | Yellow |
| Protection type | Integral ballast resistor Built-in by diode |
| [Us] rated supply voltage | 24 V |
| IP degree of protection | IP65 (with seal XVLZ912) conforming to IEC 60529 IP65 (with seal XVLZ912) conforming to NF C 20-010 IP40 conforming to IEC 60529 IP40 conforming to NF C 20-010 |
Complementary
| Supply circuit type | DC |
| Connections - terminals | Threaded connector: clamping capacity 1 x 0.2...1 x 1.5 mm² |
| Current consumption | 18 mA |
| [Ui] rated insulation voltage | 50 V conforming to IEC 60947-1 |
| Bulb lifespan | 100000 h |
| Nominal voltage limit | 0.8...1.1 Un |
| Terminals description ISO n°1 | (X1-X2)PL |
| Height | 16 mm |
| Width | 16 mm |
| Depth | 51 mm |
| Net weight | 0.007 kg |
Environment
| Product certifications | CSA UL |
| Protective treatment | TC |
| Ambient air temperature for operation | -25…70 °C |
| Ambient air temperature for storage | -40…70 °C |
| Overvoltage category | Class 3 conforming to IEC 60536 Class 3 conforming to NF C 20-030 |
Offer Sustainability
| Sustainable offer status | Green Premium product |
| REACh Regulation | REACh Declaration |
| EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration |
| Mercury free | Yes |
| RoHS exemption information | Yes |
| China RoHS Regulation | China RoHS declaration |
| Environmental Disclosure | Product Environmental Profile |
| Circularity Profile | No need of specific recycling operations |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 18 reviews
Sort
Product Reviews
★★★★★ 5
Top quality
Model: SLH20025
This Siless Hybrid 3-in-1 sound deadening mat is easy to work with and feels high-quality. The butyl material is thick and pliable, making it simple to cut and fit into doors, floors, or panels.
After installation, road noise and vibrations are noticeably reduced, and it also seems to improve the overall cabin feel. No bad smell.
At 25 sq ft per roll, it’s a good value for anyone looking to dampen noise and improve car acoustics. Overall, a solid, effective option for automotive soundproofing. Used on a Fiesta ST.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2026
★★★★★ 5
Made a big improvement in cabin noise—highly recommend
Model: SLH20025
Siless Hybrid made a huge difference in reducing noise in the floor of my truck cabin. In some areas, there was basically just bare sheet metal between the inside and outside, so adding this really helped the truck feel more solid and noticeably quieter on the road.
I used Kilmat on the doors, and honestly I wish I had used Siless Hybrid there too, but it was too late by the time I realized the difference. This material is very sticky, easy to cut, and simple to apply, which made the install pretty smooth.
Just a heads-up: the tacky side gets messy and will bond to clothing really easily, so be careful during installation. Overall, I’d definitely buy it again—great product with real results.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2025
★★★★★ 5
Very good product at a fair price
Model: SLH20025
Very good sound deadener and heat shield, it is a bit sticky to work with, but easy to shape and cut
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
★★★★★ 5
I wish I had Siless 20 years ago!!!
Model: SLH20025, Model: SLH20025
I have installed all kinds of insulation in vehicles over many years. I only needed to purchase 2 boxes to complete the entire interior siding of my 2025 chevy express, what a great value! I wanted to insulate my locksmith van for sound and heat. The sound reduction virtually eliminated the road noise. These panels also look amazing. It got up to 110F in the sun with the doors closed. After adding Siless insulation the temperature maxed out at 97F. That is a massive difference. Plus, I didn't even finish with the roof before testing. Siless Hybrid 3in1 was extremely easy to cut and adhere onto metal panels. I'm impressed with the quality of the individual panels and the adhesive is not toxic smelling compared to some others. My favorite thing about these panels is you can actually take them off and readjust them before they finally stick and they do not leave any black residue behind when you pull them up to adjust them. All I needed was a heat gun, knife and a roller to complete this job. The size of each panel is perfect, you can handle them with ease. I probably won't need your product again for a while, but when I do I will definitely be back.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 21, 2025
★★★★★ 5
Works well and is easy to install.
Model: SLH20025, Model: SLH20025
I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing.
Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble.
The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition.
Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway.
All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2025
recommand products
Vintage - Metal Unpainted Piston Ring Set - 941889
68.25
Jones Exhaust A4318S Glasspack Muffler Straight 3 Inlet & Outlet
46.30
Vintage - Cast Unpainted Water Pump - J8134320
66.50
Jones Specialty 2.5 Stainless Tip JST027G
42.46
Schultz 7812138 Direct-Fit Tail Pipe for DP 1995-1997 Toyota Corolla F/Pipe 1.6L
191.34