kennametal bp200 win 50 mm water induction nozzle

kennametal bp200 win 50 mm water induction nozzleThe BP200 WIN 50mm Series is the lightest option in the WIN Water Induction Nozzle System of Kennametal, applying the weight advantage of the BP200 SiAlON liner. Water is inducted at the nozzle at 0. 7 to 6 litres per minute via any standard water supply or pump. The complete system includes the WIN Hose, rubber washer, 3 4 NH water inlet, and on off valve. The 50 mm aluminium thread fits in standard 50 mm nozzle holders directly, on which ideally a

The BP200 WIN™ 50mm Series is the lightest option in the WIN™ Water Induction Nozzle System of Kennametal, applying the weight advantage of the BP200 SiAlON liner. Water is inducted at the nozzle at 0.7 to 6 litres per minute via any standard water supply or pump. The complete system includes the WIN™ Hose, rubber washer, 3/4-NH water inlet, and on/off valve. The 50 mm aluminium thread fits in standard 50 mm nozzle holders directly, on which ideally a 25 mm (1") blast hose supplies the abrasive stream.

For the same 50 mm format in a tungsten carbide liner for higher impact resistance, the WIN™ 50mm TC Series is available. For the BP200 SiAlON WIN™ in the 1-1/4" thread format, the BP200 WIN™ standard Series is available.

Key Features

• BP200 SiAlON liner
• Water induction at the nozzle — dust suppression using existing pressure blast equipment; no special wet blast machine required
• Water consumption 0.7–6 litres per minute; compatible with rust inhibitors via pump
• Complete system: includes WIN™ Hose, rubber washer, 3/4-NH water inlet, and on/off valve
  
• Thread: 50 mm (aluminium)

Available Sizes & Lengths
Available in bore sizes 1/4" (#4), 5/16" (#5), 3/8" (#6), 7/16" (#7) and 1/2" (#8). Nozzle length increases with bore size. Contact Kennametal or your distributor for confirmed length per bore size.