Pay in installments of $745.62 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 16 - Sep 21
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Ice-O-Matic MFI0800A Ice MachinesIce O Matic MFI0800A Flake Ice Maker 900 lb 24 hr Air cooled Self contained condenser Stainless steel finish Engineered for high volume, worry free ice production, the Ice O Matic MFI0800A delivers up to 900 lb (408 kg) of soft, moldable flake ice every 24 hoursall from a compact 21" wide footprint. Its rugged stainless steel construction, advanced SystemSafe monitoring and water sensing technology make it the smart, long term choice for grocery,
Ice-O-Matic MFI0800A Flake Ice Maker – 900 lb/24 hr
Air-cooled • Self-contained condenser • Stainless steel finishEngineered for high-volume, worry-free ice production, the Ice-O-Matic MFI0800A delivers up to 900 lb (408 kg) of soft, moldable flake ice every 24 hours—all from a compact 21"-wide footprint. Its rugged stainless steel construction, advanced SystemSafe™ monitoring and water-sensing technology make it the smart, long-term choice for grocery, seafood, healthcare and bar service operations that demand pure, versatile ice.
Key Features
- High capacity: up to 900 lb (408 kg) of flake ice per day at 70 °F air / 50 °F water.
- Slim 21" (533 mm) width fits tight back-of-house spaces or stacked installations.
- SystemSafe™ load monitoring automatically shuts the unit down before gearbox overloads can cause costly damage.
- Water sensor prevents low- or no-water failures and is immune to poor water quality conditions.
- Heavy-duty stainless steel evaporator & auger for maximum corrosion resistance and longevity.
- Industrial-grade roller bearings and reinforced gearbox rated for years of continuous duty.
- Self-contained, air-cooled condenser—no remote condenser or additional plumbing required.
- Certified safe: cULus, NSF & CE listed.
Performance & Utilities
| Ice type | Flaked ice |
|---|---|
| Production (70 °F air / 50 °F water) | 900 lb / 408 kg per 24 hr |
| Production (90 °F air / 70 °F water) | 615 lb / 278 kg per 24 hr |
| Water usage | 4.4 gal per 100 lb of ice |
| Energy usage | 4.4 kWh per 100 lb of ice @ 90 °F air / 70 °F water |
| Electrical | 115 V / 60 Hz / 1-phase, 3-wire (including ground) |
| Min. circuit ampacity | 22.3 A |
| Max. fuse / breaker | 30 A |
Dimensions & Weights
| Width | 21 in / 533 mm |
|---|---|
| Depth | 24 in / 610 mm |
| Height | 27 in / 686 mm |
| Net weight | Approx. 205 lb / 93 kg (shipping) |
Installation Highlights
- Provide 6" (152 mm) clearance at front and rear for proper air intake & exhaust.
- Ambient temperature: 50 °F – 110 °F (10 °C – 43 °C).
- Potable water temperature: 40 °F – 90 °F (4.4 °C – 32 °C).
- Water pressure: 20 – 120 psi (1.4 – 8.3 bar).
- 3/8" FPT potable water inlet & 3/4" FPT gravity drain required.
- Ice storage bin sold separately—compatible Ice-O-Matic bins: B25, B40, B42, B55, and more.
Warranty
Ice-O-Matic backs the MFI0800A with 3 years parts & labor coverage plus 5 years parts on the compressor.
Register your machine with an Ice-O-Matic water filtration system to optimize performance and maximize warranty protection.
Important: This air-cooled unit must be installed by a certified refrigeration
technician and operated with adequate clearance and drainage. Failure to follow installation
guidelines may void the warranty.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 7 reviews
Sort
Product Reviews
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast.
I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers.
(I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.)
I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers.
These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug.
I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin.
My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs.
I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018
★★★★★ 5
Top banana
Size: 5 Pairs / 10 pcs
Theses banana plugs are hight quality non magnetic. Banana plugs easy to usexand very high quality sound different because of the better connection and quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 5
Very easy to use
Size: 12 Pairs / 24 pcs
I have an Onkyo audio/video receiver along with an Emotiva amplifier. Both have speaker "post" terminals which will accept banana plugs, OR I can connect the speaker wires by unscrewing the posts, poke the speaker wires into the terminals and then tighten the posts. The problem with poking the wires into the terminals and tightening the posts vs using banana plugs is that there is a risk of the wires touching the metal on the back of the chassis or touching other speaker wires, causing a short if one is not careful. With banana plugs, they simply plug into the back/top of the posts, eliminating the rsick of a short circuit. They can also be unplugged very easily if needed. Banana plugs are DEFINITELY the preferred way to connect speakers to an receiver or amplifier if they have post-style terminals.
These particular banana plugs came in a package of 12 I believe. They were very reasonably priced, and simple to connect to the end of the speaker wires. Simply unscrew the banana plugs, use a small, standard jewelry screwdriver and loosen both of the set screws, insert the speaker wire, then tighten the set screws, and then screw the banana plug back together.
The plugs have either a red band which would typically be used for your "Right" speakers, or a black band which would typically be used for the "left" speakers. The banana plugs insert into the top or front of the speaker terminal posts on the amp and receiver. They fit VERY snug, and so I did have to apply just a little bit of pressure in order to insert them into the posts, but once plugged in, rest assured they're not going anywhere. They are snug.
I highly recommend these.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2025
★★★★★ 5
Heavy-Duty 4 AWG Cable With Flexible Insulation
Size: 10ft, Color: 4awg
I am satisfied with this 4 AWG cable. The insulation coating is soft, and the cable itself is very pliable, making it easy to bend and route into the configuration needed for installation. Despite the flexibility, it still feels like a heavy-duty cable designed to handle demanding applications.
I am using this cable to provide the necessary amperage to start the generator on my trailer, and it performs as expected. I also like that the wire gauge and cable properties are clearly printed along the side of the insulation, making identification easy during installation or future maintenance.
The cable arrived in good condition with no obvious odor from the insulation or packaging. Overall, this appears to be a quality heavy-duty cable that is flexible, easy to work with, and suitable for high-current applications.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
★★★★★ 5
True copper battery cables that are high quality
Size: 10ft, Color: 4awg
I love having heavy duty cable on hand for my cars. It's so nice to be able to make your own starter and alternator cables when restoring cars.
These cables are 100% copper, not CCA (copper clad aluminum) like many others are. Copper is far superior for conductivity and handling higher loads.
The rubber on the cable is thick and yet very flexible..it's clearly marked and seems very durable. I like to use a hydraulic crimping tool and then add marine grade heat shrink tubing with the adhesive inside of it to keep it as weatherproof as possible.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026