Standard Firework Factory Boards

Standard Firework Factory BoardsReclaimed from the Standard Fireworks Factory in Huddersfield, these original timber boards once formed the floors of the sites many industrial buildings. Each carries deep character, aged tones, and the texture of decades of use. Genuine British industrial heritage. Trade enquires welcome. Product Standard Firework Boards Surface Hand sanded original Engineered wear layer 6mm Reclaimed Pine Ply Spec: 15mm FCS BB BB Birch plywood EN314 2 class 3,

Reclaimed from the Standard Fireworks Factory in Huddersfield, these original timber boards once formed the floors of the site’s many industrial buildings. Each carries deep character, aged tones, and the texture of decades of use. Genuine British industrial heritage.

Trade enquires welcome.

• Product – Standard Firework Boards
• Surface – Hand sanded original
• Engineered wear layer - 6mm Reclaimed Pine
• Ply Spec: 15mm FCS BB/BB Birch plywood EN314-2 class 3, EN636-2, EN13986
• Width: Approx 100 - 130mm
• Thickness - 21mm
• Length: Approximately - 2.4m
• Holes: Yes, larger ones will be filled.
• Cracks: Yes, larger ones will be filled.
• Colour variation: some - typical with reclaimed timber
• Joint detail: Hand worked tongue and groove.
• Finish – Bona Lacquer

Fixing methods: Guidelines Only

• Fully glue down: Yes
• Face nail or secret nail: Yes
• Float: No
• Use over under floor heating: Yes, always check with UFH manufacturer's guidelines