Magic Clay Bar Mitt Fine Grade With Nano Technology

Magic Clay Bar Mitt Fine Grade With Nano TechnologyA Revolutionary alternative to the clay bar. The"8. 3 x 6" microfibre mitt with an advanced polymer rubber layer bonded on one side. Faster and more effective than a clay bar. It can be rinsed and reused numerous times. 1. Thoroughly wash the vechile to remove all loose surface contamination. Although the clay mitt is designed to remove overspray metallic falllout and other embedded particles using on a non washed surface may result in scratches. 2.

A Revolutionary alternative to the clay bar. The"8.3 x 6" microfibre mitt with an advanced polymer rubber layer bonded on one side. Faster and more effective than a clay bar. It can be rinsed and reused numerous times.

1. Thoroughly wash the vechile to remove all loose surface contamination. Although the clay mitt is designed to remove overspray metallic falllout and other embedded particles using on a non washed surface may result in scratches.

2. Pre-soak the magic clay mitt in water prior to use. Using a pH-neutral car shampoo, start wetting the surface of the car that you wish to treat for contamination removal with the microfibre side of the mitt.

3. Either wearing or holding the mitt, with the polymer surface to the paint surface, gently rub the paintwork to activate the contiminant removal, turning and rinsing the mitt regurarly to flush away waste particles and reduce possibly of damage to the paint finish.

4. Use a fresh, clean microfibre cloth to dry the area once the surface contaminants have been removed.

5. The magic clay mitt should be discarded when the surface is damaged and contains excess contamination.