SKU: 36558663461

Whiteline 03-09 VW Golf MK5 / 04-12 Audi A3/S3 Transmission Mount Insert Bushing Kit

Sale price$28.00 Regular price$31.11
Save 10%

Pay in installments of $7.78 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 31 - Aug 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Whiteline 03-09 VW Golf MK5 / 04-12 Audi A3/S3 Transmission Mount Insert Bushing KitSoft factory bushings whilst they do a good job of not transmitting engine vibration, they do create vague and unresponsiveness in the vehicles drive train. Under hard acceleration, the engine and transmission rotates, Whiteline's synthetic elastomer torque arm inserts work in conjunction with the OE rubber bushing giving your car better throttle response as well as more crisp and defined gear shifts. Suits both Automatic or manual transmissions.

Soft factory bushings whilst they do a good job of not transmitting engine vibration, they do create vague and unresponsiveness in the vehicles drive train. Under hard acceleration, the engine and transmission rotates, Whiteline's synthetic elastomer torque arm inserts work in conjunction with the OE rubber bushing giving your car better throttle response as well as more crisp and defined gear shifts. Suits both Automatic or manual transmissions.

Installation Instructions
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
  • Install guide included providing detailed instructions on how to install your new purchase .
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
  • Inserts are designed to work with the original factory bushing rather than replacing it.

This Part Fits:

Year Make Model Submodel
2006-2013 Audi A3 Base
2010-2013 Audi A3 TDI
2006-2013 Audi A3 Quattro Base
2008-2009 Audi TT Base
2008-2011,2014-2015 Audi TT Quattro Base
2012-2013 Audi TT Quattro Premium Plus
2012-2013 Audi TT Quattro Prestige
2012-2013 Audi TT RS Quattro Base
2009-2015 Audi TTS Quattro Base
2009-2011 Volkswagen CC Luxury
2011 Volkswagen CC R-Line
2009-2011 Volkswagen CC Sport
2009-2010 Volkswagen CC VR6
2009-2011 Volkswagen CC VR6 4Motion
2009-2010 Volkswagen CC VR6 Sport
2007 Volkswagen Eos 2.0T
2007 Volkswagen Eos 3.2
2007 Volkswagen Eos Base
2012-2015 Volkswagen Eos Executive
2015 Volkswagen Eos Final Edition
2008-2016 Volkswagen Eos Komfort
2008-2013 Volkswagen Eos Lux
2013-2014 Volkswagen Eos Sport
2008 Volkswagen Eos Turbo
2008 Volkswagen Eos VR6
2007 Volkswagen GTI Base
2006-2007 Volkswagen Jetta 2.0T
2005-2007 Volkswagen Jetta 2.5
2005 Volkswagen Jetta GL
2005 Volkswagen Jetta GL TDI
2005-2009 Volkswagen Jetta GLI
2005 Volkswagen Jetta GLS
2005 Volkswagen Jetta GLS TDI
2008-2010 Volkswagen Jetta S
2008-2010 Volkswagen Jetta SE
2008-2010 Volkswagen Jetta SEL
2005-2006,2009-2010 Volkswagen Jetta TDI
2010 Volkswagen Jetta TDI Cup Edition
2006 Volkswagen Jetta Value Edition
2007-2010 Volkswagen Jetta Wolfsburg Edition
2006-2007 Volkswagen Passat 2.0T
2006-2007 Volkswagen Passat 3.6
2005 Volkswagen Passat GL
2005 Volkswagen Passat GL TDI
2005 Volkswagen Passat GLS
2005 Volkswagen Passat GLS 4 Motion
2005 Volkswagen Passat GLS TDI
2005 Volkswagen Passat GLX
2005 Volkswagen Passat GLX 4 Motion
2008-2010 Volkswagen Passat Komfort
2008 Volkswagen Passat Lux
2012-2014 Volkswagen Passat S
2012-2014 Volkswagen Passat SE
2012-2013 Volkswagen Passat SEL
2012-2014 Volkswagen Passat SEL Premium
2012-2014 Volkswagen Passat TDI SE
2012-2013 Volkswagen Passat TDI SEL
2014 Volkswagen Passat TDI SEL Premium
2008 Volkswagen Passat Turbo
2006-2007 Volkswagen Passat Value Edition
2008 Volkswagen Passat VR6
2007,2013-2014 Volkswagen Passat Wolfsburg Edition
2006-2007 Volkswagen Rabbit 2.5
2008-2009 Volkswagen Rabbit S
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 36558663461

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 8 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Ed Train
Waukegan, US
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast. I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers. (I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.) I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers. These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug. I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin. My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs. I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018
V
Verified Purchase
V88
Port Orchard, US
★★★★★ 5
Top banana
Size: 5 Pairs / 10 pcs
Theses banana plugs are hight quality non magnetic. Banana plugs easy to usexand very high quality sound different because of the better connection and quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
G
Verified Purchase
Gummy Roach
Louisville, US
★★★★★ 5
Very easy to use
Size: 12 Pairs / 24 pcs
I have an Onkyo audio/video receiver along with an Emotiva amplifier. Both have speaker "post" terminals which will accept banana plugs, OR I can connect the speaker wires by unscrewing the posts, poke the speaker wires into the terminals and then tighten the posts. The problem with poking the wires into the terminals and tightening the posts vs using banana plugs is that there is a risk of the wires touching the metal on the back of the chassis or touching other speaker wires, causing a short if one is not careful. With banana plugs, they simply plug into the back/top of the posts, eliminating the rsick of a short circuit. They can also be unplugged very easily if needed. Banana plugs are DEFINITELY the preferred way to connect speakers to an receiver or amplifier if they have post-style terminals. These particular banana plugs came in a package of 12 I believe. They were very reasonably priced, and simple to connect to the end of the speaker wires. Simply unscrew the banana plugs, use a small, standard jewelry screwdriver and loosen both of the set screws, insert the speaker wire, then tighten the set screws, and then screw the banana plug back together. The plugs have either a red band which would typically be used for your "Right" speakers, or a black band which would typically be used for the "left" speakers. The banana plugs insert into the top or front of the speaker terminal posts on the amp and receiver. They fit VERY snug, and so I did have to apply just a little bit of pressure in order to insert them into the posts, but once plugged in, rest assured they're not going anywhere. They are snug. I highly recommend these.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2025
K
KBar
Boise, US
★★★★★ 5
Heavy-Duty 4 AWG Cable With Flexible Insulation
Size: 10ft, Color: 4awg
I am satisfied with this 4 AWG cable. The insulation coating is soft, and the cable itself is very pliable, making it easy to bend and route into the configuration needed for installation. Despite the flexibility, it still feels like a heavy-duty cable designed to handle demanding applications. I am using this cable to provide the necessary amperage to start the generator on my trailer, and it performs as expected. I also like that the wire gauge and cable properties are clearly printed along the side of the insulation, making identification easy during installation or future maintenance. The cable arrived in good condition with no obvious odor from the insulation or packaging. Overall, this appears to be a quality heavy-duty cable that is flexible, easy to work with, and suitable for high-current applications.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
H
hazard2k
Whiting, US
★★★★★ 5
True copper battery cables that are high quality
Size: 10ft, Color: 4awg
I love having heavy duty cable on hand for my cars. It's so nice to be able to make your own starter and alternator cables when restoring cars. These cables are 100% copper, not CCA (copper clad aluminum) like many others are. Copper is far superior for conductivity and handling higher loads. The rubber on the cable is thick and yet very flexible..it's clearly marked and seems very durable. I like to use a hydraulic crimping tool and then add marine grade heat shrink tubing with the adhesive inside of it to keep it as weatherproof as possible.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026

recommand products