SKU: 39555615732

Fits 2011-2012 Chevrolet Camaro 1LT Tie Rods 3301018

$116.97 $129.97
Save 10%
No.2 Bestseller on 2pierres.com >

Pay in installments of $32.49 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 8 - Sep 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Fits 2011-2012 Chevrolet Camaro 1LT Tie Rods 3301018The Baer "Tracker" adjustable tie rods feature 6061 T 6 aluminum, fully machined sleeve with a black anodized finish, a Teflon lined 5 8" heim joint and 4140 steel pin which. The pin is machined with the correct taper so no modification to the OE spindles is required and then heat treated. The Trackers Tie Rods are vehicle specific, mounting to the OE inner tie rod and offer approximately . 875" of adjustment at the spindle to help correct bump steer

The Baer "Tracker" adjustable tie-rods feature 6061 T-6 aluminum, fully machined sleeve with a black anodized finish, a Teflon lined 5/8" heim joint and 4140 steel pin which. The pin is machined with the correct taper so no modification to the OE spindles is required and then heat treated. The Trackers Tie Rods are vehicle specific, mounting to the OE inner tie rod and offer approximately .875" of adjustment at the spindle to help correct bump steer issues due to modified suspensions and/or poor OE design. Best of all these are made in the USA! Sold in pairs. | Sleeve Length: 3.250" | Inner sleeve thread size: M14"x1.5 RH Thread | Outer sleeve thread size: 5/8"x18 RH Thread | Heim: 5/8" x 5/8" Teflon lined | Applications: 2010-12 Chevrolet Camaro with stock spindles | Replacement components: Sleeve - 6250034 Pin - 6190025 Heim - 6840008 Spacers - 6260060


Features:

  • Direct bolt on upgrade
  • Black E-Coated for Rust Protection
  • Fully adjustable
  • Simple installation
  • Tapered pin for NO spindle modifications
  • Vehicle specific

Specs:

Application 2010-2013 Camaro
Brand Baer Brakes
Emission Code 6
Finish Black e-coated
Greasable Yes
Product Type Steering Tie Rod End

Application:

Year Make Model Submodel Engine
2011-2012 Chevrolet Camaro 1LT 217/3.6L V6
2011-2012 Chevrolet Camaro 1SS 376/6.2L V8
2011-2012 Chevrolet Camaro 2SS 376/6.2L V8
2010-2012 Chevrolet Camaro LS 217/3.6L V6
2010-2012 Chevrolet Camaro LT 217/3.6L V6
2010-2012 Chevrolet Camaro SS 376/6.2L V8
2012 Chevrolet Camaro ZL1 376/6.2L V8
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 39555615732

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 26 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Tony Nowikowski
Phoenix, US
★★★★★ 1
TPMS Compatability is a LIE
Size: Sedan, Crossover, Small Truck
2018 Subaru Impreza, with one tire with a slow leak (about 2 PSI a week) that I couldn't trace. I bought the "Full-Size Sedan, Small Truck, Crossover" kit (the 6 oz. pouch) based on my tire size, 225/40/18. After I removed the valve core, attached the dispensing hose and opened the cap, the product would not flow into the tire. I squeezed the pouch, but that only made the product leak out around the valve stem onto the wheel and driveway. I tried rotating the tire so the valve stem was at the top, and and also at the bottom. I even took the wheel off so I could get a fully vertical flow. Nothing worked. I finally gave up after only about half the product was dispensed, and I do think most of it went somewhere other than in the tire. I reinstalled the valve core, remounted the wheel, plugged in my little lighter socket-powered compresseor, and tried to inflate the tire. And ... NOTHING. The pressure reading on the compressor immediately shot up to over 100 PSI, and it automatically shut off. Tried multiple times, with the same result. I again removed the valve core, and a) no air came out of the tire when I removed it, and b) even with no valve core the compressor still would not pump air into the tire. Clearly the gunk had completely blocked the valve/TPMS. Fortunately, when I took the tire to Costco (where I'd bought it), they were able to fix the damage I'd done, as well as patching a small nail hole in the tread I hadn't seen (that was clearly the source of the slow leak) for no charge. Since I've already submitted a refund request, ultimately all it really cost me was my time and effort ... and a whole lot of stress.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 26, 2024
R
Verified Purchase
raspree56
Waukegan, US
★★★★★ 5
Forget the gooey stuff, this product WORKS! See UPDATES 1 and 2
Size: Compact Car, Mid-size Sedan
I've had a slow leak in one of my tires for some time. It's a common thing with chrome plated alloy wheels, they get corrosion on the bead area where the tire seals and then you get a slow leak. This was the only product which is water soluble so it's not going to make a permanent mess inside the tire; additionally, it contains tiny bits of Tufsyn which is the material some tires are made from. So it's not just a liquid that is sealing the leak, it's tiny bits of rubber. I was putting 5 or 6 lbs of air in my tire every few days, and I could see that the tire was getting low. I installed this TireJect per the instructions a week ago and the tire appears to be doing great, despite the fact that we've had some very cold weather. (I didn't want to check it with a gauge while it was this cold out because just in case the tire's valve didn't seal all the way; I'll check with a gauge when this cold snap is past.) While I can't say for 100% sure that there is no more leak, I suspect that the leak has been sealed up completely. This is a product unlike the others and I think it's worth the price. FIRST UPDATE: It has been two months and I haven't had to add any air at all to the tire where I used this product. There was a slow rim leak which was losing about a pound or so per day and it has been totally fixed. The car has sat for several days a few times, including in single digit cold weather, as well as driven regularly otherwise, and the tire hasn't lost any air. I think it's the micro Tufsyn fibers in this product which seal leaks better than some goopy glue stuff other brands are made of. I totally recommend this product! SECOND UPDATE - it's been eleven months since I added this to my tire with the slow rim leak and I have not had to add air a single time. Not once. THIS STUFF WORKS. Forget the slime and foam and get this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 5, 2024
J
Verified Purchase
Jack
Bozeman, US
★★★★★ 5
Good
Prefect. It’s exactly what my lawnmower needed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 2, 2026
G
Verified Purchase
George Gagnon
Birmingham, US
★★★★★ 5
Snowblower repair.
Snowblower spark plugs that work for me.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
A
Verified Purchase
Amazon Customer
Grantham, US
★★★★★ 5
Fast delivery and good price
Good price and name brand
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2026

recommand products

Classic Monogram Envelope Satchel Matelasse Chevron Leather Large
1015.00
Nouvelle Vague Handbag Monogram Nylon
705.00
Honey-Can-Do Tree Storage Bag
25.28
Maranta Leuconeura
14.99
Haws Warley Fall - Watering Can
149.50