SKU: 64724194699

TrueRC X2-AIR MK II 5.8GHz Patch Antenna Pair for HDzero VRX4 - LHCP

$91.79 $101.99
Save 10%
No.2 Bestseller on 2pierres.com >

Pay in installments of $25.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 24 - Jul 29

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

TrueRC X2-AIR MK II 5.8GHz Patch Antenna Pair for HDzero VRX4 - LHCPMore gain and more convenience! This is the adaptation of the all mighty X AIR into a slick low profile face mount for the HDzero VRX4 module. Simply slide on the antennas on the modules rails and screw on the custom knurled SMA connectors. Improved 13dBic gain and massive combined beam width of 165deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of OCP and you got the antenna full house. Check

More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the HDzero VRX4 module. Simply slide on the antennas on the module’s rails and screw on the custom knurled SMA connectors. Improved 13dBic gain and massive combined beam width of 165deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of OCP and you got the antenna full house.

 Check out all our HDZero compatible products, LHCP Antennas and the rest of our TrueRC Products!

Dual elements array provide 13Dbi circular polarized beam of 75deg

By combining the two elements onto a single feed, the gain is boosted and horizontal coverage is widened by compromising the vertical coverage which isn’t used much in FPV.

Low profile design, only 15mm thick.

Most compact antennas of this gain level at only 15mm thickness, letting you leave them on at all the time without fear of breaking them. The included double-sided foam tape give a solid bound to your goggles’s face plate and install in minutes.

Custom made SMA connectors, fit the HDzero in style.

As with all other components of X²-AIR antennas, the custom SMA connector is made to the highest standards to fit your HDzero module perfectly and make sure every bit of RF power is transferred from the  X²-AIR. A knurled finish provide easy tightening and a quality look exclusive to TrueRC.

Pair them with our OCP omni antennas.

Add a pair of TrueRC omni-directional antennas for a complete antenna system!

Features:

  • Circularly Polarized
  • Sector type beam shape (widest on horizontal)
  • Mount direct on HDzero module with included slide-on mounts.
  • Compact low-profile design, easy to store and transport
  • High 13 dBic for unsurpassed long range and signal penetration
  • Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
  • Super wide 150 degree beam for each antenna combining to 165deg beam width
  • Custom knurled SMA connectors

Specifications:

  • Bandwidth: 5.1GHz-7.0GHz
  • Gain: 13 dBic
  • Polarization: LHCP
  • Beam-width Horizontal*: 150deg
  • Beam-width Vertical*: 62deg
  • Hor. beam @-3dB**: 75deg.
  • Vert. beam @-3dB**: 34deg.
  • Connector: Custom knurled SMA
  • Dimension: 72mm x 34mm x 15mm
  • Weight: 20g each
  • Include mounts for installation onto HDzero module.

*Coverage of individual antenna where reception is at least equivalent to an omni.
**Coverage of individual antenna where at least 70% of the max range is obtained.

Includes: 

  • 1 x TrueRC X2-AIR MK II 5.8GHz Patch Antenna Pair for HDzero VRX4 - LHCP

  • 2 x Slide on Mounts

Useful 3D Prints: 

      Shipping Notes
      • Free Standard Shipping on $100+ Orders to the USA.
      • Except Preorder products are shipped in 48 hours.
      • Delivery to the USA:
      1. Standard Shipping : 3-10 business days
      • If time is of the essence, please consider selecting expedited delivery for faster service.
      Exchange/Return Notes
      • We offer a 30-day return/exchange service after receiving.
      • Final sale items are not eligible for returns or exchanges.
      • To process your return/exchange, please contact us at [email protected]
      • Please click here for more details>>> Return & Exchange Policy
      SKU: 64724194699

      Discover Niche Categories That Outsell

      Top-Converting Item to Boost Your Average Order

      4.4 ★★★★★
      Based on 23 reviews
      Sort
      Highest Rating
      Newest First
      Oldest First
      Product Reviews
      R
      Verified Purchase
      rice650
      Lake Worth, US
      ★★★★★ 4
      Better than expected - big office cleanup
      Size: 6ft, Color: Yellow, Size: 6ft, Color: Yellow
      I got this power strip because it seemed like the most plausible one available, notwithstanding the reviews which particularly complained about it being prone to overheating. I certainly didn't want to burn down my home, so I tested it pretty thoroughly before I got anywhere near installing it. The power strip arrived exactly as claimed. It is indeed 45 inches long with sixteen outlets. The power cord is substantial-feeling, and feels like it's probably 14 AWG, or possibly #12 (Pic 1), and was the length I expected (6' in my case). The mounting brackets are sufficient to mount the power strip, but only at the ends, and they can't be concealed. This means that things don't end up as solid as one would like, and if you really care about aesthetics you'll end up being offended, but hey this is a power strip, and if you didn't have it the power cord mess would be way uglier. The outlets themselves are spaced out well enough that there's enough room to put in fairly wide wall wart transformers, but not those which have the plug pins configured such that the transformer has to point sideways. This means that if you want to be able to fill all of the slots, you can only put one of these in, and it has to go at the right-hand end. If you locate it on the left then it covers the switch. In my case, I filled the strip up completely, with one sideways transformer at the right hand end, and I still have many more plugs which won't go, but I've at least managed to improve my cable management a fair bit. Before I installed it, I tested it by boiling an electric kettle using the outlet which is the farthest from the switch (Pic 2). This is the most stressful way to test things, since is stresses all of the wiring and intermediate outlets before it even gets to the one I was using. The kettle draws 11.6 Amps, so about 1400W (though it's amps that actually matter). I then watched the thermal behaviour of the power strip as it worked. As can be seen the first thermograph, Pic 3, the power strip itself stayed cool, indeed barely above ambient. The power meter and power cord going to the kettle are on the right. Pic 4 shows a detail of the switch end of the power strip. The switch never heated to above 77F, which was again barely above ambient. Pic 5 shows a detail of the power meter shown in Pic 2. As can be easily seen, the power cord for the kettle warms up a bit, reaching 100F, but this is clearly the kettle's power cord and plug warming up, not the power strip itself. Pic 6 shows a detail of the unused outlets on the strip. These all warmed up a little, but never got over 83F. To me, this is negligible. As a result of this testing, I had no problems with going ahead and installing the power strip. I knew I'd be filling the power strip, but just adding up the devices I planned to plug in (two desktops, four screens, and numerous other devices), I knew that I wouldn't need more than about 4.5 amps, so I have at least 2.6X headroom. Pic 7 shows a part of the power strip as installed - I couldn't get far enough back to show all of it. Pic 8 is a thermograph of the same, with the power strip running across the middle of the picture. The how spots on the power strip are all transformers - clearly not very efficient, but not actually more than warm, and not the power strip's fault. By contrast, the really hot items visible are a DSL router on the far right, and a VOIP phone device lower on the right. Thus, I conclude that there's nothing untoward with the power strip. Lots of the devices I use are inefficient and/or run fairly hot, but if my house burns down, it doesn't look like it's going to be because of this power strip. All told, this product seems to be very good value for something that actually cleans up my life and has this many outlets. It exceeded my expectations, particularly since my expectations had been lowered by some of the other reviews. It would certainly have been better (for me) had it been longer and with more, and more widely-spaced, outlets, but I can't fault them for making what they made, and their claims seem to have been accurate. Still, the construction is not terribly sturdy and the mounting brackets should have been better thought out.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on February 2, 2026
      A
      Verified Purchase
      Analu Frantz
      Alexandria, US
      ★★★★★ 5
      Plenty of Outlets and Solid Build
      Size: 6ft, Color: Silver
      I now have way more outlets than I’ll ever need—haha—but that’s not a bad problem to have! This power strip fits neatly behind my TV stand and feels very well made. The spacing between outlets is convenient for larger plugs, and it seems built to last. Overall, a high-quality and practical solution for managing multiple devices.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on November 13, 2025
      P
      Verified Purchase
      Paul
      Omaha, US
      ★★★★★ 5
      Good for dc power supplies
      Size: 6ft, Color: Yellow, Size: 6ft, Color: Yellow
      The AC outlets are very snug. I’m using this primarily for battery tenders and battery chargers; the outlets are spaced far enough apart to fit the dc power supplies and they stay in place even when mounted horizontally.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on December 16, 2025
      W
      Verified Purchase
      William Bolin
      Lowell, US
      ★★★★★ 5
      As good or better than most.
      Size: 4ft, Color: Silver
      I was very happy with this item. It’s very heavy duty and appears to be something that will last me forever.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on May 25, 2026
      G
      Verified Purchase
      gabe
      Chelsea, US
      ★★★★★ 5
      27" monitor mounted easily
      Style: Single Arm, Size: 13"-34", Style: Single Arm, Size: 13"-34"
      I ended up getting 2 of these monitor arms for the different desks in our office, and I am happy with both of them. The arms are super easy to assemble and adjust to the tension one desires. The arms hold the position where one sets them too, and the gas pistons make it super easy to use. Each arm has a channel on the bottom that allows the wiring to be ran through and hidden, yet remaining accessible if needed. The mounting clamps hold securely and there is no wiggle whatsoever, and it is nice to have a strong feeling monitor mount. It is lightweight and compact so it doesn't feel clunky on the desk. Highly adjustable left to right, up and down, and the screen forward and backward tilt. The price is really good for the overall value and quality of the product. Just make sure to order the right mounting arm depending on the size of your monitor, and you will be fine. Nice quality and feel, and the aesthetics are great too.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on May 1, 2026

      recommand products

      PETE THE CAT THE PETS GO MARCHING
      13.95
      Pantalón Médico para Mujer Modelo Smart - Scrubs
      175.00
      Summertime Learning Grade 6
      10.99
      Cosmic Twilight - Litter Box Cover Minder - Magnetic Drill Trash Collector
      10.00
      Top Deportivo Modelo Zyla | Velvet Soft
      150.00