AW Metpress PFG069 Gas Copper Press Fitting 25mm 90° Deg Elbow M & F

AW Metpress PFG069 Gas Copper Press Fitting 25mm 90° Deg Elbow M & FOverview AW Metpress DN25 1 PFG069 gas copper press fitting 90 deg elbow M & F is compatible with all popular press tools and their copper press systems such as Viega, Connex Banninger B Press and Kembla Kempress. The AW 90 degrees press elbows are used extensively in all modern gas plumbing works, allowing a beautiful right angle finish and presentation. Along with the AW straight couplings, these are the most common press fittings all plumbers must

Overview

AW Metpress DN25 1” PFG069 gas copper press fitting 90° deg elbow M & F is compatible with all popular press tools and their copper press systems such as Viega, Connex Banninger B Press and Kembla Kempress. 

The AW  90° degrees press elbows are used extensively in all modern gas plumbing works, allowing a beautiful right-angle finish and presentation. Along with the AW straight couplings, these are the most common press fittings all plumbers must have.

The AW Metpress gas copper press elbow features a lip at the end of the fitting. The lip helps align the actual press areas along the copper pipes and provide extra sealing material when pressed. The yellow sealing ring is made of HNBR O-ring, specifically designed for gas applications, suitable for LPG and Natural Gas (NG) systems, with a temperature range of -20 - 70 °C and a maximum pressure rating of 1600 kPa.

The AW Metpress copper press fittings have a slug fit over the copper pipes and will remain in place until the press tool is applied, allowing easy installations and adjustments. Once pressed and secured by the correct press tool, the fitting will not dent or deform the internal copper to ensure safe and reliable gas flow. These features have made the AW copper press systems a faster and safer connections to conventional compression or capillary systems. AW offers 25 years warranty on the Metpress copper press fittings.

Technical Details

• Manufacturer: AW
• Size: DN25
• Specifications:
• Maximum Working Pressure: 1600 kPa
• Temperature Range: -20°C to 70°C
• Gas approved for LPG and Natural Gas (NG)
• Suitable for Australian AS1432 standard hard, half hard or annealed type A and B copper tubes 
• Materials:
• Copper
• HNBR O-ring (yellow)
• Features:
• Tamper free permanent joint
• No soldering required
• 25 years warranty on copper press fittings
• Fast and cost effective to install
• Intended Use: Joining gas copper pipes at 90° degrees
• SKU: PFG069

Package Contents

• AW Metpress PFG069 DN25 1” gas copper press fitting 90° deg elbow M & F
• Package Weight 105g