Pay in installments of $32.25 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 28 - Oct 3
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Matek H743-Slim V4 Flight Controller - 30x30mmMatek H743 Slim V4 is a high end flight controller designed for freestyle and long range drones powered by 28S LiPo batteries. It offers wide compatibility with Betaflight, iNav, and ArduPilot firmware. The board is built around the powerful H743 processor combined with two ICM42688P gyroscopes for precise motion data and a DPS368 barometer for altitude measurement. For analog video, it includes an OSD chip and a microSD slot for Blackbox logging.
Matek H743-Slim V4 is a high-end flight controller designed for freestyle and long-range drones powered by 2–8S LiPo batteries. It offers wide compatibility with Betaflight, iNav, and ArduPilot firmware. The board is built around the powerful H743 processor combined with two ICM42688P gyroscopes for precise motion data and a DPS368 barometer for altitude measurement. For analog video, it includes an OSD chip and a microSD slot for Blackbox logging.
What is new on the H743-slim-V4
- Increase the output current of BEC5V from 2A to 2.5A, and raise the filtered VBAT current from 1A to 2A.
- Add TVS protection on Input voltage
- Add protections on more MCU I/O.
- Replace DPS310 with DPS368(environmentally protected against water (IPx8), dust & humidity)
- Other functions, Pins/Pads layout are same as previous board version.
Check out all our 30x30mm Flight Controllers and the rest of our Matek Products!
Betaflight / Inav Mapping Details
ArduPilot Mapping Details
Specifications
- MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash
- IMU: Dual ICM42688P
- Baro: DPS368
- OSD: AT7456E (SPI2)
- Blackbox: MicroSD card socket
- 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
- 13x PWM outputs(including “LED” pad)
- 2x I2C
- 1x CAN
- 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2)
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- 1x SPI3 breakout
- USB Type-C(USB2.0)
- 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
- 1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G)
- Dual Camera Inputs switch
- 5V 0r Vbat(2A) filtered power ON/OFF switch
- DJI FPV OSD is supported by any spare UART
Power
- Vbat Input: 6~36V (2~8S LiPo) with TVS protection
- BEC: 5V 2.5A cont. (Max.3A)
- LDO 3.3V: Max.200mA
- VBat filtered output 2A for VTx and camera
- No Current Sensor built-in
- ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K)
- Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot
FC Firmware
- ArduPilot: MATEKH743
- BetaFlight: MATEKH743
- INAV: MATEKH743
Physical
- Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
- Dimensions: 36 x 36 x 5 mm
- Weight: 7g
Package Includes:
- 1 x H743-SLIM-V4
- 6 x Silicon grommets M4 to M3
- 1 x JST-SH1.0_8pin cable, 5cm
- 2 x JST-SH1.0_8pin connectors
- 1 x JST-GH-4P to JST-GH-4P cable for CAN port, 20cm
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy