SmartAVI XT-TX800S Video Extender with Audio

The SmartAVI XT-TX800S Video Extender with Audio is a versatile, enterprise-ready solution designed to distribute video and audio signals across multiple remote locations with ease. Built for classrooms, conference rooms, digital signage networks, control rooms, and event venues, this extender system delivers reliable, high-quality AV transmission over standard Category 5/5e/6/7/8 cables. With support for RS232 control and dual-screen capabilities, the XT-TX800S makes it simple to extend the reach of your AV infrastructure without compromising on performance or affordability.

• Extend video and audio signals to up to 8 remote locations using cost-effective CAT-5 style cables, enabling scalable AV distribution without pricey fiber or HDMI matrix systems.
• Dual screen support allows simultaneous display of content at multiple remote sites, increasing viewer reach and improving engagement across rooms and zones.
• Easy installation with widely available CAT-5/5e/6/7/8 cables means quick deployments, simple maintenance, and reduced installation costs for large-scale AV networks.
• RS232 extension capability provides robust remote control and data passthrough, enabling integrated control of third-party devices and systems from a central location.
• Long reach per output—up to 1,000 feet (300 meters)—ensuring flexible placement of displays and sources across expansive venues and facilities.

Technical Details of SmartAVI XT-TX800S

• Video and audio extension across up to 8 locations using Category 5 UTP cabling
• Supports dual-screen output for concurrent displays at remote sites
• Compatible with CAT-5/5e/6/7/8 cabling for broad installation options
• Maximum per-output distance of up to 1,000 feet (300 meters)
• RS232 remote control and data passthrough for integrated device management

how to install SmartAVI XT-TX800S

Setting up the XT-TX800S is a straightforward process designed for AV technicians and technically inclined users. Follow these general steps to achieve reliable operation across multiple display locations:

1) Plan your topology: Determine which locations will act as transmitter sources and which will host the remote display endpoints. Identify power outlets and route CAT-5/5e/6/7/8 cables so they run cleanly between units without interference.

2) Connect the source devices: Attach your video and audio source(s) to the XT-TX800S transmitter unit. Ensure all connections are secure and that any required EDID or format compatibility configurations are set according to your equipment and room requirements.

3) Link remote endpoints: Run CAT-5 family cables from the transmitter to each remote receiver unit. Maintain proper cable integrity and avoid sharp bends to preserve signal quality over the full 1,000-foot reach per output.

4) Connect displays at remote locations: Attach each display or monitor to its corresponding receiver unit, ensuring the correct input source is selected on the display and that the receiver is powered.

5) Establish RS232 control paths: If remote control of connected devices is needed, connect RS232 cables between the XT-TX800S units and the controlled devices, following the manufacturer’s wiring guidelines for baud rate, parity, and data bits.

6) Power up and test: Apply power to all TX and RX units, then verify video and audio are passing cleanly to every remote location. Confirm that dual-screen functionality is operational and that RS232 control works as intended. Fine-tune any EDID/resolution settings to optimize display performance across rooms.

7) Optimize performance: Inspect each link for potential interference or cabling issues. If you encounter noise or stability problems, rearrange cables away from power sources, use shielded cabling where appropriate, and, if needed, shorten or segment long runs to preserve signal integrity.

8) Documentation and labeling: Label each CAT cable and display end to simplify future maintenance and troubleshooting. Maintain an inventory of what each transmitter/receiver pair is carrying to support scalable growth and quick diagnostics.

Frequently asked questions

Q: What is the XT-TX800S designed to do?

A: It is a video and audio extender system capable of distributing AV signals to multiple remote locations over CAT-5 family cables, with RS232 control and dual-screen support to enhance multi-room and multi-zone installations.

Q: How many remote locations can it support?

A: Up to eight locations can be extended from a single transmitter configuration, making it suitable for mid-to-large AV deployments in education, corporate, and event settings.

Q: What cable types are recommended?

A: The system is designed to operate over Category 5, 5e, 6, 7, and 8 (CAT-5/5e/6/7/8) cables, providing flexibility to match your existing infrastructure and budget.

Q: How far can the signal travel per output?

A: Each output can extend up to 1,000 feet (approximately 300 meters), enabling flexible placement of displays across sizable rooms or multiple rooms in a facility.

Q: Does the XT-TX800S support RS232 control?

A: Yes. The system includes RS232 extension capability for remote control and data passthrough, which is valuable for integrated AV control systems and hardware that require serial communication.

Q: Is dual-screen support available?

A: Yes. The XT-TX800S offers dual-screen support, enabling simultaneous display of content at multiple destinations for enhanced viewer reach and impact.

Q: Is installation difficult for non-technical users?

A: While some AV setup knowledge is helpful, the XT-TX800S is designed for practical, scalable installations. Following the standard steps for cabling, power, and basic configuration will yield robust performance with standard AV tools and common CAT cables.

Q: Can it carry other formats beyond HDMI or VGA?

A: The XT-TX800S is built to extend a wide range of video and audio formats over CAT cables. This versatility supports diverse signal types and equipment commonly found in modern AV networks.

Q: Where can I find exact specifications and compatibility details?

A: Detailed specifications, compatibility notes, and SKU/UPC references are typically listed on the product page and in distributor databases. For precise technical details, refer to the official product data and the supplier’s specifications repository using the product’s UPC or SKU.

The XT-TX800S from SmartAVI is engineered for reliability, flexibility, and scalable growth. Its use of standard CAT cables keeps installation costs low while delivering solid long-distance AV performance. Whether you’re upgrading a classroom, outfitting a corporate training center, or expanding a digital signage network, this extender family provides a dependable backbone for multi-location AV distribution. The ability to support multiple formats, extend to eight locations, and maintain synchronized dual displays makes it a practical choice for installations where consistent, high-quality video and audio delivery is essential. The inclusion of RS232 control further enhances integration with other devices, ensuring you can manage peripherals and systems from a central control point. With thoughtful design, robust performance, and straightforward deployment, the XT-TX800S stands out as a compelling option for professionals seeking an economical yet powerful extension solution.