Ships within 48 hours · Estimated delivery Oct 2 - Oct 7
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
APEX EC-7 | 18" x 8.5" ET45 | 5x120mm | 72.56mmAPEX Race Parts designs and manufactures high performance, flow formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high quality performance parts that meet the demands of racing and street performance enthusiasts. FOR WHEEL FITMENT GUIDE https: apexwheels. com fitment
APEX Race Parts designs and manufactures high performance, flow-formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high-quality performance parts that meet the demands of racing and street performance enthusiasts.
ModelEC-7 Wheel QuantitySold Individually Wheel Diameter18" Wheel Width8.5" OffsetET45 Bolt Pattern5x120mm Centre Bore72.56mm Load Rating1,550lbs Weight19.55lbs (8.86kg) Face ProfileProfile 1; shallow concavity Wheel ConstructionFlow Formed
A FITMENT FOR YOU
Need help selecting the proper wheel fitment for your BMW? APEX Race Parts have tirelessly test-fitted hundreds of setup combinations in order to provide direct-fit, spacer-free wheel packages for everything from showroom-fresh cars to all-out race builds. Their detailed fitment guides help you avoid costly trial-and-error and walk you through every step of finding your perfect setup.
Fit Matters
Fit Matters The right solution for every application
An optimized car setup begins with the perfect wheel and tyre fitment. Without model-specific attention to each wheels specifications, maximum performance is compromised. Each size was selected to find the right balance between a clean fit and the most grip possible. The EC-7’s wide range of widths, diameters, offsets and face profiles result in unique fitments ranging from 8.5" to 10.5" wide. Each wheel combines these features to meet the different brake caliper, strut, and fender clearance needs of each BMW model. Most vehicle models have options for wheels that range from direct-fit to aggressive for specialty applications.
Face Profile One design, many levels of beauty
The EC-7 wheel is available in three increasingly-concave face profiles; The shallowest face provides increased caliper clearance on narrow applications, while the deepest concave face reduces weight and creates a stunningly aggressive appearance on low offset and wide-width applications.
Spokes More than just a pretty face
The curved spokes of the EC-7 serve many purposes, both in terms of form and function. The split "Y" spokes were carefully evaluated from every aspect to ensure light weight and remarkable strength. Their curved design increases brake calipers in almost every application, allowing the EC-7 to fit where the ARC-8 design simply cannot. The unique curvature of each face profile reduces centre pad material as they are optimally selected for each unique width and offset. The lack of a deep front lip and spokes that connect directly to the barrel's lip, producing a rigid wheel with even load distribution.
Brake Clearance A lot of room in a tight space
Spoke clearance is only half the problem. The barrel construction on a wheel also needs to be big enough to clear the sides of your caliper and rotor. Many aftermarket wheels that have aesthetic compromises in their design may work with smaller stock brakes, or smaller diameter big brake kits, but the larger kits will pose a major problem. The barrel of the EC-7 wheel offers unmatched caliper clearance because wheels shouldn’t limit your choice of aftermarket brake kits, and brake kits shouldn’t force you to run oversized wheels. APEX 2D modelled most Big Brake Kits available in Solidworks and tweaked the wheel design of the EC-7 prior to production in order to fit as many kits as possible.
Hub Centre Easy to access lugs
Race wheels can't just be light, they need to function in a high performance environment. Unlike the narrow lug recesses of most other wheels, the EC-7 wheel features a wide open hub centre that easily accommodates oversized race lugs and beefy impact sockets. This allows for quick and easy wheel changes and prevents chips and scratches from tools.
Hub Centric No rings or adapters here
All APEX EC-7 wheels are purpose built for select vehicle applications, and hub locating rings are never required for any BMW application. All 5x120mm bolt pattern wheels feature a direct-fit, 72.56mm centre bore.
Centre Cap A factory fit and finish
APEX don't reuse one cap design for all of their wheels. Every EC-7 wheel is designed to work with factory centre caps. You can easily replace APEX centre caps with OEM roundels for a clean factory look. The EC-7 wheels will ship with the APEX Gloss Black centre cap that mimics the size and shape of a BMW factory centre cap.
Wheel Hardware Original or Aftermarket, it all works
The EC-7 wheel can be used with all OEM and aftermarket mounting hardware with a 60° tapered seat. Lug bolts, wheel locks, and stud conversion kits all work perfectly. The EC-7 wheel also accepts wheel spacers without issue. The shallow rear chamfer allows the wheel to remain hub centric even when 5mm flat spacers are used. The chamfer is deep enough to clear the chamfered lip found on some aftermarket spacers that would typically cause improper seating of the wheel and, therefore, wheel vibration.
TPMS Sensors They all fit
TPMS sensors, which monitor tyre pressure, are one piece of technology that can't be compromised. The attention to OEM compatibility on the EC-7 wheel doesn't end with centre caps. All APEX wheels accept OEM and aftermarket equivalent TPMS sensors, and any standard sized metal or rubber valve stem.
THE APEX STANDARD
Flow Forming Benefits of forging, without the pain
These APEX wheels are produced using a manufacturing process known as flow forming. This process significantly reduces weight in the barrel, which has the greatest impact on rotational mass. During the manufacturing process, rollers apply high pressure to the inner barrel, compressing the aluminium into its final shape. This effectively eliminates porosity and aligns the grain structure of the metal, which increases tensile strength. The end result is a lightweight and extremely strong barrel that equals that of a traditional forged wheel at a fraction of the cost.
Testing & Certifications Verifiable 3rd party testing
Many companies promote their wheels as being certified by the VIA when they actually aren’t. That’s like using the USDA logo on food without permission. APEX wheels get officially tested and registered by the VIA in Japan, and they have the proof to back it up.
Japan’s JWL is a commonly followed standard for wheel load ratings. The APEX flow formed wheels meet, and most exceed, their load rating requirements. Most manufacturers only meet the minimum while some don’t even do that. Check and verify load ratings before you buy.
Weight & Strength Optimization It’s all in the details
Various design features were implemented to ensure that the EC-7 wheel design was light, but had even more strength to handle the abuses experienced in endurance racing. APEX began with a beefy, multi-spoke, one-piece design. They then added reliefs in the mounting pad to remove weight between lug holes, where they could safely save weight. The design was then run through Finite Element Analysis (FEA) to further optimize the spoke and barrel design. The result is a lightweight wheel with extra strength in all the right places. Use the EC-7 with confidence. It’s over built for both street and track.
Finishes Because being faster is just not enough
The EC-7 wheel is available in multiple finishes. All APEX wheels are finished using a comprehensive multi-stage liquid paint system over a powder coated base coat. Standard finishes include gloss-metallic finishes, and semi-gloss or matte finishes.
Often overlooked, painted or powder coated lug hole seats can cause hardware to loosen or begin the spread of paint chipping to more visible sections. The coating process of the EC-7 leaves lug holes, centre bores and mounting pads untouched, which ensures proper fit and torque values.
Lifetime Warranty A wheel you can depend on
As of recent, all APEX wheels now come with a lifetime structural warranty and 1 year finish warranty, so you can be confident in your purchase. Please contact us for the full terms and conditions.
Models
1 Series / E82 / E88 (2007-2013) / 135i N54
1 Series / E82 / E88 (2007-2013) / 135i N55
1 Series / E82 / E88 (2007-2013) / 125i
1 Series / E82 / E88 (2007-2013) / 120i
1 Series / E87 (2004-2011) / 130i
1 Series / E87 (2004-2011) / 120i
1 Series / E87 (2004-2011) / 118i
1 Series / E87 (2004-2011) / 116i
1 Series / E87 (2004-2011) / 123d
1 Series / E87 (2004-2011) / 120d
1 Series / E87 (2004-2011) / 118d
1 Series / F20 (2012-2019) / M140i
1 Series / F20 (2012-2019) / M135i
1 Series / F20 (2012-2019) / 125i
1 Series / F20 (2012-2019) / 120i
1 Series / F20 (2012-2019) / 118i
1 Series / F20 (2012-2019) / 116i
1 Series / F20 (2012-2019) / 118d
2 Series / F22 / F23 (2014-2021) / M240i
2 Series / F22 / F23 (2014-2021) / M235i
2 Series / F22 / F23 (2014-2021) / 230i
2 Series / F22 / F23 (2014-2021) / 228i
2 Series / F22 / F23 (2014-2021) / 220i
2 Series / F22 / F23 (2014-2021) / 220d
Shipping Notes
Free Standard Shipping on $100+ Orders to the USA.
Except Preorder products are shipped in 48 hours.
Delivery to the USA:
Standard Shipping : 3-10 business days
If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Awesome ball! My dog loves it and plays with it all the time. He's a very aggressive chewer and there are only a few toys he can have without destroying them. Very pleased with this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
S
Verified Purchase
Sonya Bushong
Pawtucket, US
★★★★★ 5
Pretty tough
Color: Black & Lake Blue
I think the toy is great, but my dog was not excited about it. He prefers the original type which is larger. I think it could possibly be cracked open by a dog with a large mouth and is intent on getting the noise maker out. But it is pretty tough.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2026
G
Verified Purchase
Grady c.
Waukegan, US
★★★★★ 3
Bite proof
Color: Blue & Red
The ball is tough but it will not take the dog having it all the time .play with them and put it up or it will not last price not bad
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
J
Verified Purchase
Joe
Cuba, US
★★★★★ 4
Definitely tough but not enough
Color: Black & Lake Blue, Color: Black & Lake Blue
I've been searching high and low for a durable and engaging toy for my 90lb american bulldog. She's destroyed countless toys and her number of toys just keep rising. This lasted for a few hours before she was able to chew off the rubber shell. But now shes still enjoying the hard plastic ball on the inside. Its also a perfect size of ball for her as she can fit it in her jaws comfortably without any worry of he swallowing it. Wish the outside shell was more durable though.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
C
Verified Purchase
cw
Belleville, US
★★★★★ 5
Large ball, still makes noise and hasn’t chewed it up yet.
Color: Black & Lake Blue
He loves playing with it and it actually doesn’t get swallowed up in his very large mouth. He can still bark talk with it in his mouth which is impressive due to its larger than a softball. It nice because I don’t feel like I’m shoving my hand in his mouth to get it out which baseball size or smaller things I do. He hasn’t chewed it up like he does other squeak toys and it makes lots of noise when tossed and bouncing. It’s hard and he insists on playing with it. we broke a pot when we accidentally hit the pot with the ball. He is always bringing me toys to throw down the hall as we watch tv. I’m like no not that one get a different one. I’m afraid I’ll break something with that one due to how heavy and large it is. That one is an outside toy, he still brings me this one daily and we’ve had it for several weeks now. Plus my cousin little boy just visited and he loved playing with it too. Its made out of material that’s easy to clean for the 17month old to play with in his play pen. It’s not so heavy you can’t throw it just heavier than the others I’m willing to toss down the hall.
,
and
Promo Codes Available: