Slimline Packout Drawer Insert for M12 Right Angle Drill and Impact Driver - Jonah Pope Design (JPD-RADI)

Slimline Packout Drawer Insert for M12 Right Angle Drill and Impact Driver - Jonah Pope Design (JPD-RADI)At 10 Spot Tools, we print the Jonah Pope Slimline Drawer inserts as single parts! This insert has room for: M12 Right Angle Impact Driver (2467) M12 Right Angle Drill (2415) 5 Divided Storage Spots in Main Tray 3 Divided Storage Spots in Lift Out Tray It fits in: 2 Drawer Packout (1 3 of 1 drawer) (48 22 8442) 3 Drawer Packout (1 3 of 1 drawer) (48 22 8443) From the designer: This is a custom insert that I have designed to fit your Milwaukee Packout

At 10-Spot Tools, we print the Jonah Pope Slimline Drawer inserts as single parts!

This insert has room for:

• M12 Right Angle Impact Driver (2467)
• M12 Right Angle Drill (2415)
• 5 Divided Storage Spots in Main Tray
• 3 Divided Storage Spots in Lift Out Tray

It fits in:

• 2-Drawer Packout (1/3 of 1 drawer) (48-22-8442)
• 3-Drawer Packout (1/3 of 1 drawer)  (48-22-8443)

From the designer:

This is a custom insert that I have designed to fit your Milwaukee Packout Drawers to store your M12 Angle Drill (C12RAD-0) & Angle Impact (M12BRAID-0) . It specifically fits the Milwaukee 2 & 3 Drawer units (48-22-8443 & 48-22-8442).

These are the specific tools the insert is designed for:

• M12 Right Angle Drill - https://www.milwaukeetool.com.au/power-tools/drills/right-angle-drills/C12RAD-0.html

• M12 Right Angle Impact Driver - https://www.milwaukeetool.com.au/power-tools/impacts-and-fastening/impact-drivers/M12BRAID-0.html

Slimline - My Modular Drawer System!

My "Slimline" Packout Drawer system is dedicated to storing the smaller and slimmer Milwaukee M12 or M18 tools. Tools such as the M12 Angle Drill fit in a space much smaller than the standard half split so I developed this extra system to work in addition to my large Drawer inserts. Each new tool insert I design for my "Slimline" range will have 3 custom file variations included to accommodate your insert on either the left, middle or right section of the drawers.

Features - Super Flexible Design

• Maximum Storage Space - x3 Files variants included to support the left, middle or right section of the drawer (pre-split or single part print files included for each). These files are custom designed to each section of the drawer to ensure you maximise the usable storage space.

• Double Layer Design - Designed to maximise efficient use of space. By having the tools "stack" it allows for fitting them into a far more compact space. Additional storage trays are also provided underneath the Impact Driver

• Drop In Tray - I also designed a custom tray to sit above the Angle Drill should you like additional storage space. This tray sits in dedicated spots that support it, meaning it will still sit in place even if the tool itself isn't underneath it.

• 2 & 3 Drawer Support - The inserts have been designed to be compatible with both the 2 and 3 Drawer Packout units. They will be most effective when used in the 3 Drawer units as that is what the depth of the insert has been based on, although they will still fit the 2 Drawer if you'd prefer.

Important Notes:

• Stock Milwaukee Drawer Dividers - Since this a fully custom contained storage system, there's no need for the stock Milwaukee Drawer Dividers. These dividers would waste space which would allow for expanded storage space inside the inserts. Please remember that you can't use my inserts and the stock dividers at the same time.

• Slimline VS my Standard Drawer Inserts - As the "Slimline" Inserts split the drawer into thirds thus won’t be cross compatible with my larger drawer inserts that split the drawer into halves if they’re in the same drawer. Simply designate a drawer for containing Slimline or Standard drawer inserts. Designs for my “Slimline” system are labelled with the blue logo seen on the thumbnail or main cover image above.