SKU: 85756578812

MaggieFrame 8 in 1 Magnetic Hoop for MYST-MW

$114.75 $127.50
Save 10%
No.2 Bestseller on 2pierres.com >

Pay in installments of $31.88 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 17 - Aug 22

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

MaggieFrame 8 in 1 Magnetic Hoop for MYST-MWMaggieFrame 8 in 1 magnetic hoop is a set of magnetic frames that includes 8 different sizes of embroidery hoop magnetic options. The 8 in 1 MaggieFrame magnetic hoops are innovative tools for your embroidery machines! 1 x 6 : It is used for small project such as socks, short sleeves. 2 x 4: It is used one woven and denim fabric. Also used on sock fanny packs, CD cases, handy for non hoopable items. 3 x 4: It is used for different size of pockets,

MaggieFrame 8 in 1 magnetic hoop is a set of magnetic frames that includes 8 different sizes of embroidery hoop magnetic options. The 8 in 1 MaggieFrame magnetic hoops are innovative tools for your embroidery machines!

  • 1″ x 6″ : It is used for small project such as socks, short sleeves.
  • 2″ x 4″: It is used one woven and denim fabric. Also used on sock fanny packs, CD cases, handy for non-hoopable items.
  • 3″ x 4″: It is used for different size of pockets, like apron pockets.
  • 5″ x 4″: It is perfect for leather, canvas, nylon and velvet fabric. It leaves no hoop burn and works seamlessly with embroidery hoops magnetic setups. Use on bag pockets, flaps, short sleeve shirts, and Christmas stockings.
  • 6″ x 8″: It is used for larger bag, purses, pillows cases, etc.
  • 7″ x 5″: It is used on large bag pockets, larger logos and flaps.
  • 4″ x 11″: It is used on large bags, pillows case, etc.
  • R6″: Called the cap hooping in the 8 in 1 set, it is similar in function to a magic hoop and is used for the back and sides of caps, bucket caps, cuffs of sleeves, collar tips, and ribbons.

Packing List of 8 in 1 Magnetic Hoop

There are total 10 items in package, details as following:

① 1”x 6” Frame x1 pcs
② 2″x 4″ Mono Frame x1 pcs
③ 3″x 4″ Pocket Frame x1 pcs
④ 5″x 4″ Christmas Stockina Frame x1 pcs
⑤ 6″x 8″ Deep Bag Frame x1 pcs
⑥ 7″x 5″ Attached Case Frame x 1 pcs
⑦ 4″x 11″ Frame x1 pcs
⑧ R6″ Radius Cap Hooping x 1pcs
⑨ Adaptor x1 pcs
⑩ Metal Bracket x1 pair ( The bracket type according to the hoop length and brand.)

How to Use 8 in 1 Magnetic Hoop?

Follow below easy steps and video to use 8-in-1 magnetic hoop:

Watch video

Compatible with MYST-MW Embroidery Machine Models

MaggieFrame 8 in 1 magnetic hoop set includes eight different-sized magnetic frames designed to meet all your embroidery needs in one purchase. Perfect for challenging areas like pockets, hats, sleeves, and pant legs, it works as a reliable magna hoop solution that eliminates the hassle of switching frames. Easy to use and gentle on fabrics, it's your ultimate embroidery companion to take projects to the next level!

Frequently Asked Questions

Q1: Is 8 in 1 magnetic hoop  free shipping?

A1: Yes, it is.

Q2: What is the advantage of the 8 in 1 set compared to the MaggieFrame Magnetic Hoop? I already have MaggieFrame magnetic hoop, should I buy the 8in1 set?

A2: Compared with Magnetic Hoop, the biggest advantage of the 8in1 set is that there are eight sizes in one set, which can meet your all embroidery needs. At the same time, the 8in1 set is very suitable for embroidery work such as socks, sleeves, trouser legs, necklines, etc. If you need to embroider these items, it is recommended to buy a set.

Q3: Can you ship to my location? When will I receive package?

A3: Yes, we can ship to your location. when shipping your packages, we use major carriers like FedEx, UPS, USPS, as well as some local courier services that offer expedited shipping.
Estimated Shipping Time: about 10-20 business days.

More information want to know, you can click here  to send us an email or WhatsApp chat!

For more product options, browse our full Embroidery Hoops and Other Products collection .

FAQs

What are the size options included in the MaggieFrame 8 in 1 Magnetic Hoop set?

This set includes eight magnetic hoops: 1″ × 6″ (25 × 150 mm), 2″ × 4″ (50 × 100 mm), 3″ × 4″ (75 × 100 mm), 5″ × 4″ (125 × 100 mm), 6″ × 8″ (150 × 200 mm), 7″ × 5″ (175 × 125 mm), 4″ × 11″ (100 × 280 mm), and R6″ (150 mm) round frame. These multiple sizes make it perfect for embroidering sleeves, caps, pockets, and various fabric materials without leaving hoop marks.

How should I install and adjust the MaggieFrame magnetic hoops for stable stitching?

To install, place stabilizer and fabric smoothly between inner and outer magnet rings, ensuring a flat tension surface. Use the adaptor and metal bracket that match your  embroidery machine. Tighten evenly to avoid fabric shift, then adjust design position via your embroidery software. The magnetic frame ensures consistent tension and reduces fabric distortion during operation.

Can these magnetic hoops be used for thick fabrics like leather or canvas?

Yes, the MaggieFrame 8 in 1 magnetic hoop for your embroidery machines is strong enough for dense materials such as leather, canvas, nylon, and denim. The magnetic grip replaces conventional clamping, preventing hoop burn while providing balanced pressure. This makes it ideal for custom bag pockets, jacket sleeves, or velvet fabric embroidery projects with excellent precision.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 85756578812

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 11 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Computer
Massapequa, US
★★★★★ 4
Easy to assemble, does the job, material is shiny nylon and shows creases, minor defects, sloppy
Size: 3 Panel 12FT W, Size: 3 Panel 12FT W
The Siebwin room divider is a good idea, and for the price, it mostly delivers on the intended functionality. I ordered the 12 foot, 3-panel version mainly to hide an unfinished basement storage area that had become an eyesore. It works well for that purpose and gives the space a cleaner appearance without spending the kind of money that more decorative dividers or custom partitions cost. If you need something temporary, portable, or mainly functional, this is a viable option. There are a few limitations that became obvious during setup and use. The first thing I noticed was that the weld quality on some of the metal poles is fairly sloppy. Once the cover is installed, you do not really see it, but up close, it does not look especially refined or professional. The blackout material also is not a matte canvas style fabric as I expected. It has more of a shiny nylon appearance, and the creases are fairly visible. Being that it’s more of a nylon, I’d be hesitant to try steaming it to remove the creases. However, the creases do not matter if you are using it in a basement, dorm, or shared room, but for photography, video work, or a professional office setting, the appearance could be disappointing. The fabric is thick enough, though. It blocks visibility well enough, but strong light behind it still shows through to some extent, nothing deal-breaking. Also, my fabric appeared to be slightly defective. The hook and loop strip on one of the bottom sections was off-center and couldn't be totally attached because it was lined up with one of the legs. I originally hoped to use this as a video backdrop, but I will probably end up replacing the fabric with a proper green screen or canvas material while continuing to use the frame itself. For now, it does a good job of covering my basement junk. Assembly was actually easier than I expected and took roughly 15 to 20 minutes. The longer vertical poles are tethered together similarly to tent poles, which made setup straightforward and fairly intuitive. The shorter horizontal pieces slide and snap together to the top and bottom of the vertical assembly. After each section is assembled, the divider panels connect together with metal plates and two knurled screws (at the top and bottom), so no tools are really required. A few screws were difficult to start because paint had gotten into the threads, but once they caught, they tightened down normally. The feet install with similar knurled fasteners and help keep the divider reasonably stable. One thing to watch for during setup is the fabric orientation. There is one arrow indicator in the middle of the fabric to indicate up. However, if you need another indicator, the smaller hook and loop strip goes on the bottom while the longer strip goes on top. I realized mine was upside down right before finishing and had to redo it. I wasn't difficult to redo, despite the defect in mine. The overall design is practical and easy to move around. I do like that the panels can fold and bend into different shapes depending on the space. The widened feet help stability, although when trying to stretch the fabric tight, I noticed the poles sometimes wanted to overlap slightly at the joints. Tightening everything helped somewhat, but it still happened occasionally. The divider feels adequate for normal indoor use, though I would not expect premium durability or luxury-level fit and finish at this price point. The entire device can also be easily disabled and stored in a tote if you need it completely out of the way. It comes with assembly instructions, but even if you didn’t have them, it’s easy to build without them (save a mistake or two). In terms of value, I think the Siebwin divider mostly matches its price. Around $100 gets you a large freestanding partition with decent usability and easy assembly, but there are compromises in materials, appearance, and refinement. The defects are also off-putting, but hopefully you won't have them. Higher-end room dividers can easily cost two or three times more, so some of the tradeoffs are expected. I also noticed cheaper alternatives online, but based on the quality here, I suspect those would probably have even more issues. For practical home use, temporary privacy, hiding storage areas, or separating shared spaces, this is a good option as long as expectations stay realistic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
T
Trendy Tales
Alexandria, US
★★★★★ 3
Works well but takes up more space than expected
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
This room divider does the job for creating a little extra privacy and was easy enough to set up. The panels feel decent quality and the wider feet help keep it more stable than some cheaper screens I’ve tried. My only issue is that it takes up a bit more room than I expected, especially with the feet sticking out. It’s still portable and folds away nicely, but definitely measure your space first. Overall it works well for separating a room or blocking off an area temporarily. i wish it came in other colors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
K
Katrina Rhodes
Carnegie, US
★★★★★ 5
Nice divider, serves it's purpose well!
Size: 3 Panel 12FT W
This room divider worked out very well for what I needed. I wanted a simple way to create a little more privacy and separation in a larger room without doing anything permanent, and this divider was an easy solution. The panels provide good coverage, and the black color gives it a clean, modern appearance that blends in nicely with different décor styles. Assembly was fairly straightforward, and once set up, the wider feet helped keep the divider stable on the floor. I was especially happy with how flexible the panels are to arrange. You can keep it mostly straight, angle it around furniture, or create a more enclosed private space depending on the layout you need. The material allows light to filter through slightly while still offering a noticeable sense of privacy. I’ve used it for separating a workspace area, but it would also work well in bedrooms, apartments, dorms, studios, or shared living spaces. Another plus is that it can be folded and moved without too much effort when you want to change the setup. Overall, this divider delivers a good balance of functionality, portability, and appearance. It’s a practical option for anyone needing temporary room separation without installing permanent walls or curtains.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
J
Jamie K.
West Palm Beach, US
★★★★★ 5
Perfect for Adding Privacy to a Piano Studio
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
I Ordered the 2 Panel version which is way too big for my needs... that's on me. So keep in mind that the picture shows a fabric made for two panels only being used on one and hence it is not pulled tight; it would pull tight and not be so wrinkly if it was set up properly as two panels. The metal pools that make up the panels seem to be well made, stable, and of good quality. They were very easy to put together and they stand up tall with plenty of height. The appearance of it with the fabric on it isn't as elegant as it could be, but it still looks good enough. The material is plenty solid, not allowing light through it, and thereby making a solid barrier. I am using it to block the view out the studio door when a student is sitting at the piano to avoid distractions from the hallway. It will allow a student to enter the studio with our distracting the student who is at the piano.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
J
Just Me
Boise, US
★★★★★ 5
Room Divider That Gives Instant “This Is a Separate Space Now” Energy
Size: 3 Panel 12FT W
The Siebwin 3 Panel Folding Privacy Screen is surprisingly effective at changing the feel of a room without requiring construction, commitment, or somebody yelling about load bearing walls. The 12 foot width gives a substantial amount of coverage, making it useful for creating privacy, dividing open areas, blocking visual clutter, or setting up temporary sections within larger rooms. This saved us a ton of time and money in our new studio and enabled us to create a kitchen and office in one room. The wider feet make a huge difference because flimsy room dividers that collapse every time someone exhales too aggressively are deeply annoying. This one feels more stable and grounded once positioned. The folding design makes it easy to move around or adjust depending on the space, and it folds down relatively compactly when not in use. It is basically the introvert curtain wall of dreams. The material has a clean, neutral look that blends well into different room styles without screaming “temporary office cubicle panic.” It works well for apartments, studios, shared spaces, dressing areas, or simply hiding the mountain of chaos you swear you are going to organize tomorrow. Practical, portable, and refreshingly easy to use without turning setup into a three hour emotional event.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026

recommand products

Thetford Hob-Grill Knob Black & Satin SPCC0618.SA for Enigma Cookers
19.92
Thetford C200 Manual Flush Pump for Cassette Toilet (2373962)
57.95
Fiamma A20 Expansion Pressure Tank (02478-02-)
45.95
Fiamma Carry Bike Hand Wheel Black (98656M469)
16.82
Hi-Vis Oxford Rain Trouser Large
31.95