Senco SCN75 Coil Nailer 45mm-75mm

Senco SCN75 Coil Nailer 45mm-75mmThe pneumatic SCN75 coil nailer runs both wire and plastic collated nails ranging from 2. 5 to 3. 3mm in diameter and 45 to 75mm in length. Being part of the Pro Series, this coil nailer can span a wide range of applications from framing and siding to sub flooring and decks. Multi directional exhaust Runs both wire welded and plastic collated nails without any adjustment Safety Yoke with sharp teeth No mar pad Dust shield Depth of drive Adjustable

The pneumatic SCN75 coil nailer runs both wire and plastic collated nails ranging from 2.5 to 3.3mm in diameter and 45 to 75mm in length. Being part of the Pro Series, this coil nailer can span a wide range of applications from framing and siding to sub-flooring and decks.

• Multi directional exhaust
• Runs both wire welded and plastic collated nails without any adjustment
• Safety Yoke with sharp teeth
• No mar pad
• Dust shield
• Depth of drive
• Adjustable trigger
• No mar pad holder

Specifications:

• Applications: Framing, sheathing/ siding, decking, sub-flooring, exterior decks, pallets and crates
• Dimensions (LxWxH): 315x132x282 mm
• Net Weight: 2.82 kg
• Fastener Length: 45 mm - 75 mm
• Fastener Diameter: 2.5 mm - 3.3 mm
• Fastener Head Type: Full Round Head
• Firing Mode: Selectable
• Air Inlet: 3/8” Female NPT
• Operating Pressure: 4.8 - 8.3 bar
• Air Consumption (at 60 shots per minute): 168 l/m
• Operating Temperature Range: -18 - 49 ºC
• Sound Pressure Level (Lpa): 92.3 dB
• Sound Power Level (Lwa): 100.3 dB
• Vibration Level: 3.42 m/s²
• Shots Per Second: 3
• Magazine Capacity: 300 pieces
• Magazine Capacity Plastic Collated: 200 pieces
• Collation Type 1: Wire Collated
• Collation Type 2: Plastic Collated 16mm
• Collation Angle: 15 º
• Wounding Type: Flat