SKU: 14040650455

Stator & Regulator Gasket For Yamaha Bear Tracker 250 YFM250 2WD ATV 1999 2000

$43.89 $48.77
Save 10%
No.2 Bestseller on 2pierres.com >

Pay in installments of $12.19 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 28 - Aug 2

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Stator & Regulator Gasket For Yamaha Bear Tracker 250 YFM250 2WD ATV 1999 2000Generator Stator Regulator Rectifier Gasket Set For Yamaha Timberwolf YFB250 1997 2001 Features: Kit include Stator, Regulator Rectifier and gasket. Meet or exceeds the OEM quality, direct replacement to your original unit. Perfect fit and ready to install. Always use a sealant to mount the cable gland joint. Instruction is NOT included. Attention: One of the most common reasons a stator breaks down is due to a broken regulator, which burns the stator

Generator Stator Regulator Rectifier Gasket Set For Yamaha Timberwolf YFB250 1997-2001

Features:
Kit include Stator, Regulator Rectifier and gasket.
Meet or exceeds the OEM quality, direct replacement to your original unit.
Perfect fit and ready to install.
Always use a sealant to mount the cable gland joint.
Instruction is NOT included.

Attention:
One of the most common reasons a stator breaks down is due to a broken regulator, which burns the stator in no time.
Therefore we highly recommend you to switch both parts.
Technically modified stators are excluded from exchange.

Specifications:
Condition: Aftermarket 100% Brand New
Type: Stator and Regulator Kit

other specification:
Stator
Number of wires: 7
Number of plugs: 2
Number of pins: 3 + 4
Number of fixation holes: 3
Number of poles: 16
Interior diameter: 35 mm
Exterior diameter: 93 mm
Pick up pulsar coil included.

Regulator
Number of wires: 5
Number of plugs: 1
Number of pins: 3 + 1 + 1

Please compare the number of pins and plugs with the old part before purchasing.

Replacement Part Number:
Stator Assy: 4BD-85510-20
Rectifier, regulator: 4KB-81960-01, 4KB-81960-02
Gasket, generator cover: 4BD-15451-00, 4BD-15451-01, 24W-15451-00

(Always compare part numbers to your parts schematics and cross reference appropriately.)
(This is NOT a genuine Part, OEM part numbers are included for product type identification and comparison only.)

Fits Make/Model/Year:
Fit for Yamaha YFM250X Bear Tracker 2WD 1999-2000
Fit for Yamaha YFB250 Timberwolf 2WD 1997-1998
Fit for Yamaha YFB250FW Timberwolf 4WD 1997-2001

(Compatibility Chart is for reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitment)

Package Includes:
1 x 16-Pole Generator Stator
1 x 5-Wire Regulator Rectifier
1 x Crankcase Gasket

(Comes exactly as pictured.)

Note:
Before installing your new stator regulator rectifier;

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors.
Our stator / regulator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.

You will get exactly what you see in pictures, if in doubt do not hesitate to compare our item to your original part.
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 14040650455

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 13 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
abur
Waukegan, US
★★★★★ 5
I love it!!!
Size: M Desk Unfinished 3/4-in and 1/2-in
Easy to assemble, all the pieces were in the box. I set everything out to be sure. Instructions were easy and clear, took about 10 min to put together. Seems to be quality pipe, strong stable build even at just hand tight. When I put the desk top on it was already level so bonus there. This kit is a great value, before I found the M desk I was looking on Pinterest for pipe leg designs thinking a trip to the hardware store and I could make it for cheaper, which was not the case. I 100% will recommend, and will purchase again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2020
N
Verified Purchase
Nancy
Charlottesville, US
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
K
Verified Purchase
Kim R-A
Bozeman, US
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
J
Verified Purchase
Joseph E. Brackman
Louisville, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
R
Verified Purchase
Russel
Lexington, US
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019

recommand products

Veer Retractable Canopy For Cruiser
69.00
Milk Street Baby Tiegen Tot Bed Rail Kit
130.00
Milk Street Baby Sage 7-Drawer Dresser
1449.99
Pali Como Night Stand
209.50
Milk Street Baby Noelani 5-Drawer Tall Chest
1472.99