Z-020 Tornador Black Cleaning Tool

The Tornador Black can be used with smaller air compressors and has an air regulator right on the tool to adjust the working air pressure. The new design also uses sealed ball bearings inside the rotation set, eliminating any contact with the tube.

The Tornador Black has about double the power of the Tornador Classic.  

Once you have made a pass over the area to be cleaned, simply wipe the surface with a microfiber towel then flip the switch on the Tornador. It becomes an instant handheld cyclonic dryer! The Tornado drastically cuts down cleaning time and effort! 

• Vacuum large debris from your interior before using the Tornador Black.   

 • Pressurize your air tool with an air compressor with at least 5.5 CFM.   

• Add a splash or two of Jax Wax Super Citrus to your tank and fill the rest with water. 

• When cleaning fabrics, turn the liquid air valve to the upright position to release the cleaning product.  Hold the nozzle a few inches from the fabric and spray in an overlapping motion. Turn the valve to the down position to dry with air. 

  For cleaning vinyl and plastics:

• Apply the product at 90 PSI.  
• Allow the product to sit on the surface for 10 to 15 seconds. 
• Wipe product off with a microfiber towel.
• Use the air gun, following with the towel, to dry crevices and creases.