
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
For Your Every Summer RSVP, with Code: SUMMER15
Description
Edge Products Accessory System EAS (expandable)The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy chain style to the Evolution CS2, CTS2 or CTS3. This means Edge can create optional accessories that can be added by the owner at any time. A second exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge. My Style Software Add up to 16 additional sensors
The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to the Evolution CS2, CTS2 or CTS3. This means Edge can create optional accessories that can be added by the owner at any time. A second exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge.
My Style Software
Add up to 16 additional sensors with the EAS universal senor input. Then setup, configure and customize those sensors through Edges My Style software package. Then Edge My Style software will recognize and Universal Sensor Input that has been connected to your CS2, CTS2 or CTS3 and allow the user to change PID name, gauge name description and units. The user can choose from a number of preconfigured sensors or enter in a custom look-up table to translate the input voltage to the measured parameter value and units,
EGT PROBE
The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn can can cause engine damage. With EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise.
TURBO TIMER
A turbo timer is a device designed to keep an engine running for a pre-specified period of time or a until a specific temperature is reached in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. This also allows the lubricating oil from the engine to circulate properly so the turbine wont burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at a high speed.
EAS UNIVERSAL SENSOR INPUT
The EAS Universal Senor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS2, CTS2 or CTS3. This means you can add custom temperature, pressure, Air/fuel and even travel/position gauges to your Edge CS2, CTS2 or CTS3! Using the Edge Accessory System provides the following benefits:
Using My Style software, sensors can be easily configured and renamed.
Up to 8 Universal Sensor Input will support up to 2 sensors for the vehicle. Each Universal Sensor Input will support up to 2 sensors for a total of 16 additional sensors that can be added to your CS2, CTS or CTS3 device.
Note: Sensors from the manufactures other than Edge can also be attached to a CS2, CTS2 or CTS3 device through the EAS universal sensor input.
Eliminates the necessity of routing multiple wires to the CS2, CTS2 or CTS3 monitor.
EAS PRESSURE SENSOR
Edges EAS Pressure Sensor is a 0 - 100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edges Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use Edges Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more.
Tolerance: +-1.5% Full Span over temperature range of -20C to 85C and +-2.4% Full Span over temperature range of -40C to 135C.
EAS TEMPERATURE SENSOR
The EAS Temperature Sensor is a 40F to 300F 1/8 NPT supplied with the connectors to plug directly into Edges Universal Senor Input System. Using Edges Temperature Sensor you can monitor Transmission Temp, Differential/Axel Oil Temp, Oil Temp, Engine Coolant Temp, Air intake temp, Pre and Post Intercooler Temp and many more. Use this in conjunction with the Universal Sensor Input and the CS2, CTS2 or CTS3 monitor to allow you to view critical temperatures with the most state-of- the- art product on the market today.
EAS AMBIENT TEMPERATURE SENSOR
If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a 40F to 230 F Waterproof 0.2 diameter sensor ready to plug into Edges Universal Sensor Input system. Now you'll never wonder what outside temperature is again.* - EAS Starter Kit Cable required ** - EAS Starter Kit Cable and EAS Universal Sensor Input requiredThe EAS Starter Kit Cable is required to connect a EAS system to any CS2, CTS2 or CTS3 device. Only one EAS starter kit Cable required per CS2, CTS2 or CTS3 device.The EAS Universal (5 volt) Sensor Input is also required to add any sensor. One Universal Sensor Input can connect up to 2 different sensors.
Part Numbers & Applications:
EAS Starter Kit Cable (required For EAS) - 98602EAS
EGT Expandable w/o Starter Kit - 98611EAS
Turbo Timer (Dodge 2006-2012 Only) - 98612EAS
Turbo Timer - 98604EAS
Universal Sensor Input (5 Volt) - 98605EAS
Pressure Sensor 0-100 psig 1/8 NPT - 98607EAS
-40F to 300F 1/8" NPT Temp Sensor - 98608EAS
Ambient Temp Sensor -40F tp 230F Waterproof 0.2" diameter sensor - 98610
My Style Software
Add up to 16 additional sensors with the EAS universal senor input. Then setup, configure and customize those sensors through Edges My Style software package. Then Edge My Style software will recognize and Universal Sensor Input that has been connected to your CS2, CTS2 or CTS3 and allow the user to change PID name, gauge name description and units. The user can choose from a number of preconfigured sensors or enter in a custom look-up table to translate the input voltage to the measured parameter value and units,
EGT PROBE
The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn can can cause engine damage. With EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise.
TURBO TIMER
A turbo timer is a device designed to keep an engine running for a pre-specified period of time or a until a specific temperature is reached in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. This also allows the lubricating oil from the engine to circulate properly so the turbine wont burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at a high speed.
EAS UNIVERSAL SENSOR INPUT
The EAS Universal Senor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS2, CTS2 or CTS3. This means you can add custom temperature, pressure, Air/fuel and even travel/position gauges to your Edge CS2, CTS2 or CTS3! Using the Edge Accessory System provides the following benefits:
Using My Style software, sensors can be easily configured and renamed.
Up to 8 Universal Sensor Input will support up to 2 sensors for the vehicle. Each Universal Sensor Input will support up to 2 sensors for a total of 16 additional sensors that can be added to your CS2, CTS or CTS3 device.
Note: Sensors from the manufactures other than Edge can also be attached to a CS2, CTS2 or CTS3 device through the EAS universal sensor input.
Eliminates the necessity of routing multiple wires to the CS2, CTS2 or CTS3 monitor.
EAS PRESSURE SENSOR
Edges EAS Pressure Sensor is a 0 - 100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edges Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use Edges Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more.
Tolerance: +-1.5% Full Span over temperature range of -20C to 85C and +-2.4% Full Span over temperature range of -40C to 135C.
EAS TEMPERATURE SENSOR
The EAS Temperature Sensor is a 40F to 300F 1/8 NPT supplied with the connectors to plug directly into Edges Universal Senor Input System. Using Edges Temperature Sensor you can monitor Transmission Temp, Differential/Axel Oil Temp, Oil Temp, Engine Coolant Temp, Air intake temp, Pre and Post Intercooler Temp and many more. Use this in conjunction with the Universal Sensor Input and the CS2, CTS2 or CTS3 monitor to allow you to view critical temperatures with the most state-of- the- art product on the market today.
EAS AMBIENT TEMPERATURE SENSOR
If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a 40F to 230 F Waterproof 0.2 diameter sensor ready to plug into Edges Universal Sensor Input system. Now you'll never wonder what outside temperature is again.* - EAS Starter Kit Cable required ** - EAS Starter Kit Cable and EAS Universal Sensor Input requiredThe EAS Starter Kit Cable is required to connect a EAS system to any CS2, CTS2 or CTS3 device. Only one EAS starter kit Cable required per CS2, CTS2 or CTS3 device.The EAS Universal (5 volt) Sensor Input is also required to add any sensor. One Universal Sensor Input can connect up to 2 different sensors.
Part Numbers & Applications:
EAS Starter Kit Cable (required For EAS) - 98602EAS
EGT Expandable w/o Starter Kit - 98611EAS
Turbo Timer (Dodge 2006-2012 Only) - 98612EAS
Turbo Timer - 98604EAS
Universal Sensor Input (5 Volt) - 98605EAS
Pressure Sensor 0-100 psig 1/8 NPT - 98607EAS
-40F to 300F 1/8" NPT Temp Sensor - 98608EAS
Ambient Temp Sensor -40F tp 230F Waterproof 0.2" diameter sensor - 98610
WARRANTY INFO:
1 Year
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 1143 reviews
Sort
Product Reviews
★★★★★ 3
Difficult/impossible to unscrew plastic cups (in order to recharge the vibrating/blinking device)
Color: Orange
Generally, I don't leave feedback on items purchased. However, in this case, I feel compelled to do so in hopes the mechanical engineers (of this product) will take my input to heart and ultimately modify it.
First the pros...
- I have 2 high-energy dogs (Jack Russell Terriers) who love their toys (e.g., chewing bones, tug-of-war, etc.) but usually get bored with them rather quickly.
- This interactive PetDroid ball, however, keeps them busy for a long time.
- In fact, my smaller dog (Max) knows its storage location and sits (as early as 6 AM) in front of the cabinet so that I give him "his ball". It keeps him busy for up to 1-2 hours at a time.
- Max is literally addicted to the PetDroid ball... his determinant play with it makes me laugh all the time.
Now, the cons...
- After several days of play, the exterior looks chewed up quite a bit. That's no problem though.
- Unfortunately, the interior "threads/grooves" of the two plastic cups (for closing/fasting) are very tiny.
- Thus, after an hour-long hard play, it is almost impossible to unscrew the 2 plastic cups in order to recharge the interior device.
- It appears the 2 cups somehow come off track and get realigned from the inside.
- At that point, I cannot unscrew the PetDroid ball in order to recharge the device.... and without the blinking/vibration, this toy is no longer fun for play.
- Ultimately, I had to place the bottom half of the ball into a vise and then use a plumbing wrench to untwist it.
Proposed Solution:
- Increase the size of the plastic cups' interior threads/grooves so that they won't get realigned/come off track.
- This would mitigate the current dilemma of NOT being able to unscrew the ball in order to recharge it.
In my view, this should be a relatively simple fix and significantly improve the durability of this product.
Thank you for your time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 4, 2022
★★★★★ 5
Good fun and entertaining!
Color: Orange
A really fun interactive toy for your dog! It's pretty erratic and really gets him chasing it. The included soft cover was kinda hard to install and then it's hard to turn it off and on with the cover on, I feel like the cover didn't really improve it at all, sure it's louder without the cover but I feel like dog also likes it that way, he likes loud squeaky toys and this thing making a bunch of noise is appealing to him. We have mostly hardwood floors so it really gets moving, I'm sure on carpet it would be a bit quieter and maybe even a bit slower to move around but on hard smooth surfaces this things can really get zipping around abd get some speed to make him chase it. Overall a fun and entertaining toy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 27, 2026
★★★★★ 5
Awesome
Color: Orange
Awesome Toy . My Jack is crazy over it. She usually get bored with others, but this toy still has her attention after a couple of weeks Runs a long time on a short charge. 👍🏻
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
★★★★★ 2
Not the Fetch-Fest I Hoped For
Color: Orange
I had high hopes for the PetDroid Interactive Dog Ball, especially with the newly upgraded features and promises of durable, motion-activated fun. Unfortunately, it didn’t quite live up to expectations for my furry friend. Here’s why I’m giving it 2 stars.
Promising Features, Lackluster Results
The idea behind this toy is fantastic: a durable, motion-activated ball that would entertain my dog without much effort on my part. The ball is supposed to roll around on its own, keeping my dog engaged and active. However, in practice, it just didn’t capture my dog’s interest.
Durability
I will give credit where it’s due: the ball is well-made and seems durable. It can withstand some rough handling, which is great for more aggressive chewers. Unfortunately, durability doesn’t mean much if your dog won’t play with it in the first place.
Motion Activation
The motion activation feature is hit or miss. While the ball does move around as advertised, it didn’t seem to move in a way that intrigued my dog. He gave it a sniff, watched it for a minute, and then walked away, unimpressed. I tried multiple times to get him interested, but he simply wasn’t having it.
Lack of Engagement
The biggest issue is that the ball just didn’t engage my dog at all. It might be more suitable for a different personality type or breed, but for my pooch, it was a total flop. He’s usually quite playful and curious, so I was surprised by his lack of interest.
Final Thoughts
Overall, the PetDroid Interactive Dog Ball might work for some dogs, but it was a miss for mine. If your dog is easily entertained by automated toys, it might be worth a try. However, based on my experience, I can’t wholeheartedly recommend it.
Pros:
Durable construction
Motion-activated as advertised
Cons:
Did not engage my dog
Motion activation wasn’t intriguing enough
Might be more suitable for specific dog types or personalities
If you decide to give it a shot, just be prepared for the possibility that your dog might not find it as entertaining as you hope. For us, it’s back to the drawing board for a more engaging toy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 14, 2024
★★★★★ 4
Pup Loves It, Some Other Notes
Color: Orange
We've had this for about six months and my 75 lb, 14-month-old German Shepherd pup LOVES IT. Her favorite is "Crazy Bouncing Mode." In fact, she doesn't care much for the normal mode. She chews it a lot - even drops it in her water bowl at times - and it's still going strong.
This is a great purchase. It's nice hands-off entertainment.
Do know that it is heavy compared to a normal ball - if your pup likes dropping it on the ground like mine does, it will land with a hard "thud," even with the included sleeve. Hopefully you don't have downstairs neighbors.
Also know that the cover that goes over the charging port is removable and your dog may choke on it if they chew it in just the right manner. Definitely only let the pup play with it while supervised.
All in all, great toy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 11, 2026
recommand products
Noli beige cantilever parasol with taupe aluminium structure 300 x 300cm
383.00
Sorells coffee table in gray aluminum and teak wood 89 x 91 cm FSC 100%
299.50
Luri stackable outdoor chair in graphite aluminium and grey texteline
139.00
Sorells coffee table in gray aluminum 89 x 91 cm
239.50
Tamaris ecru aluminium outdoor side table Ø48cm
104.00