Pay in installments of $34.99 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 2 - Aug 7
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Happymodel Mobula7 1S HD w/Gyroflow ELRS 75mm BNF Brushless Whoop (2.4Ghz)Mobula7 1S HD version is a light and efficiency 75mm brushless whoop which provide 1080P HD video record function. A highly integrated AIO Flight Controller, supports ESC with a maximum current output of 12A. We added blackbox for this 1s 75mm HD recorder whoop. Now it could support gyroflow. Although the external blackbox is not install perfectly and insert SD card is not friendly to most of the people, however we still think it's really excited for
Mobula7 1S HD version is a light and efficiency 75mm brushless whoop which provide 1080P HD video record function. A highly integrated AIO Flight Controller, supports ESC with a maximum current output of 12A. We added blackbox for this 1s 75mm HD recorder whoop. Now it could support gyroflow. Although the external blackbox is not install perfectly and insert SD card is not friendly to most of the people, however we still think it's really excited for this small whoop could record a video with gyroflow steady and keep safe flying .
Key Features
- X12 5-IN-1 AIO flight controller
- VTX Power up to 400mw
- ELRS V2.0 Support
- NEW RS0802 KV20000 motors
- 1080P HD Video record
- Blackbox Ready support GYROFLOW
- Smooth and powerful
- Compatible for 1S Lipo/LIHV
- Recommend 1S 450mah/550mah/650mah batteries (Not include)
Specification
- Brand Name: Happymodel
- Item Name: Mobula7 1S HD 75mm Micro FPV whoop drone
- Wheelbase: 75mm
- Size: 99mm*99mm*45.5mm
- Weight: 33g
- Receiver option: SPI 2.4GHz ELRS V2.0 / SPI Frsky D8/D16
| Motor |
Mode: RS0802 KV20000
Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ10.5mm*13.5mm Weight(g):2.0g No.of Cells(Lipo):1S only |
| Propeller |
Weight:0.24g
Material:PC Pitch:1 inch Props Dia:40mm Center Thickness:5mm Center Hole Dia:1.5mm |
| Flight Controller |
X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: ICM20689(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16 Built-in voltage detection Built-in current sensor |
| Onboard 4in1 ESC |
Power supply: 1S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Support Bluejay firmware When use Blujay firmware with 48khz, should set startup power to 1100/1200 |
| Onboard SPI ExpressLRS 2.4GHz Receiver |
Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : Enameled copper wire length 30mm Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRSCompatible with ExpressLRS V2.0 TX Module Couldn't flash separately ExpressLRS firmware |
| Onboard Frsky SPI D8/D16 receiver Version |
Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : Enameled copper wire length 30mm Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRSCompatible with ExpressLRS V2.0 TX Module Couldn't flash separately ExpressLRS firmware |
| Onboard 5.8g OPENVTX |
Firmware version: OPENVTX
Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) |
| Runcam Split3-Lite |
Model: RunCam Split3-Lite
Field of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3) Video Resolution:1080@60fps/1080@50fps/1080@30fps/720@60fps Video File Format: MOV Image Resolution:2 MP TV Mode: NTSC (720*480)/PAL (720*576) Switchable Interface: JST 1.25mm / UART and SH 1.0mm Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III) Hole Distance of Installation: 25.5*25.5mm PCB Size: 29*29mm Lens Module Size: 14*14mm Lens Specs: M9 Power Input: DC 5-20V(Non-direct power supply from battery. Powered directly with battery will generate surges and burn the camera.) Working Current: 450mA @5V |
| External Blackbox |
Size:18*15.5*4.5
With Built-in Voltage booster module Weight:1.5gram SD Card support max to 32GB SD Card need to use FAT32 Format Notes: Need to careful to insert the TF SD Card , and don't pull it out while install the battery. |
Included
- 1x Mobula7 1S 75mm whoop Drone Frame (Mobula7 v4 frame)
- 1x Propeller disassemble Tool
- 1x 1S series balance charging board
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 27 reviews
Sort
Product Reviews
★★★★★ 4
Happy after aggravating install!
Style: Magnetic Mount, Style: Magnetic Mount
Works now that I finally got it to hold. Otherwise would have given it 5 stars. The air vent ‘lip’ on my 2018 Tacoma is so short so not much for this to clamp on to. This was hard to install. Instructions didn’t have anything about putting the parts together and extra cushion pieces. I watched the video and it was like mine once I got it to hold. I tried with one layer then added a layer then removed added layer and then finally got it to hold! Maybe 10 tries! Now that it’s holding it’s perfect! I left it unscrewed just a little tiny bit so can move the phone view around a little. Happy now!
Build quality:
It seems to be pretty strong and will last my truck’s lifetime.
Phone mount:
Like that it is strong magnet holder and not bulky
Ease of installation:
Not easy. Kept not staying attached then finally just got it. I don’t know magic trick but was just about to give up then it caught the small lip and held tight. Ever other attempt kept popping off as I tightened it down.
Value for money:
I think at $39.99 was a little high but hopefully last one I ever buy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 12, 2025
★★★★★ 5
Solid iPhone Holder
Style: Magnetic Mount
I’ve been searching for a phone holder that doesn’t take up one of the drink holders and actually works well. I had been eyeing a vent mounted holder but was hesitant until I found this one. It had good reviews and was designed to work with my Tacoma. I decided to try it and was pleasantly surprised. It was easy to assemble, fit perfectly, secured nicely, and held my phone in place even in bumpy conditions. The vent location puts it in a good alignment with my vision which is especially helpful when I’m using my navigation app. If you’ve been looking for a decent, reasonably priced, well-built iPhone holder, this is an excellent choice!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 9, 2025
★★★★★ 5
Safe phone travels
Color: for 2025-2026 Kia Carnival
Works in my Kia Carnival Hybrid so u can have my phone at eye level and does not block my screen. Easy to install. Not too sticky. Waiting to see how it holds up to the FL heat. To be continued.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 23, 2026
★★★★★ 1
Does not fit and stay properly. Pops off the screen on its own.
Color: for 2025-2026 Kia Carnival, Color: for 2025-2026 Kia Carnival
The bracket would not fit properly and keeps popping off.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2026
★★★★★ 1
Kia phone holder, it’s worth it if you go buy some heavy duty tape!
Model: 2014-2018 Forte
If you’re going to buy this phone holder, you better get some Strong tape because when I put it in my car, the tape didn’t stick at all. I bought some clear thicker tape that is used for patching the liner in a pool, it’s waterproof and works in hot or cold temperatures and now the phone holder is in place and will not move and now works beautifully!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 5, 2025