Pay in installments of $3487.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 4 - Aug 9
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
FiiO K7 BT Bluetooth Desktop DAC & AMPFeatures Truly balanced headphone amp THX AAA 788+ amp technology Dual AK4493S DACs Multiple intelligent protection systems Power supply with numerous independent LDOs Included 12V 24W low noise switching power supply RGB status indicators 3 output modes Two levels of hardware gain Numerous outputs and inputs Truly balanced decoding and amplification The K7 has a six stage audio circuit with truly balanced analog and digital sections which helps to
Features
- Truly balanced headphone amp
- THX AAA 788+ amp technology
- Dual AK4493S DACs
- Multiple intelligent protection systems
- Power supply with numerous independent LDOs
- Included 12V/24W low-noise switching power supply
- RGB status indicators
- 3 output modes
- Two levels of hardware gain
- Numerous outputs and inputs
Truly balanced decoding and amplification
The K7 has a six-stage audio circuit with truly balanced analog and digital sections – which helps to reduce crosstalk and reproduce music to a great extent, allowing you to better enjoy the purity of your music.
Democratized high-quality balanced amplification couldn’t sound better
Using the same THX AAA 788+ amplifiers as the K9 Pro, the K7 is capable of outputting 560mW into a 300Ω load at 1% distortion, and 2000mW into a 32Ω load at 1% distortion. This ensures both low and high impedance headphones are powered with aplomb, and most importantly lets you experience musicality that’s sure to tug at your heartstrings.
Dual AK4493SEQ rich and delicate overall sound
The left and right channels are each equipped with an efficient high-performance AK4493SEQ. With this DAC’s pleasant timbre, its rich and delicate overall sound will let you rediscover your music all over again.
Robust decoding capabilities take a trip around the music world
The XMOS XUF208 decoder chip uses dual clock management to handle various music formats with ease, allowing you to easily listen to many audio formats.
RGB indicator lights for a colorful entrance
The RGB indicator lights are capable of displaying single colors as well as mixed colors, with a unique light flow effect during power-on/off or input switching. Dazzling and vivid light effects give your desk some much needed spice.
Specifications
| Name / Model No. | K7 | Hardware solution | DAC: AK4493S*2 , USB: XMOS XUF208 , Voume IC：NJU72315 * 2, AMP：THX AAA 788+ * 2 |
| Color | Black | Volume Scroll | Potentiometer+ADC Sampling |
| Weight | ≈610g | FiiO Control | Unsupported |
| Gain | L/H | Firmware upgrade | XMOS can be upgraded via USB |
| Maximum supported sampling rate |
PCM 384kHz-32bit/DSD256（USB DAC） PCM 192kHz-24bit（COAX） PCM 96KHz-24bit（OPT） |
Sampling rate indication | Blue：44.1KHz/48KHz Yellow：88.2/96/176.4/192/352.8/384KHz Green：DSD64/128/256 |
| Recommended headphone impedance | 16~300Ω | ||
| Buttons and interfaces | |||
| Buttons | input button*1+gain switch*1+output switch*1 | USB | USB B（data） |
| LINE IN | RCA sockets | LINE OUT | RCA sockets |
| OPT IN | TOSLINK | COAX IN | RCA sockets |
| BAL PO | Standard 4.4mm port | SE PO | Standard 6.35 mm port |
| Power parameters | |||
| Power supply | DC 12V/2A | Battery capacity | / |
| Audio parameters | |||
| Line output performance parameters | |||
| Frequency response | 20Hz~20KHz：±＜0.4dB（UAC) | Crosstalk | ≥102dB (1kHz/10kΩ) |
| 20Hz~20kHz：±＜0.8dB(SPDIF IN ) | Noise floor | ＜3μV（dbA） | |
| 20Hz~50KHz：±＜2.2dB（UAC) | SNR | ≥116dB (dbA，UAC) | |
| 20Hz~50kHz：±＜1.7dB(SPDIF IN ) | |||
| THD+N | ＜0.0005%(1kHz/10kΩ/dbA) | Output level | ≥2Vrms |
| Headphone output performance parameters（6.35mm） | |||
| Output power1 | L+R≥1220mW+1220mW（32Ω /THD+N＜1%) | Output impedance | ＜1Ω（32Ω） |
| Crosstalk | ≥77dB (1 kHz/32Ω) | ||
| Output power2 | L+R≥140mW+140mW（300Ω / THD+N＜1%) | Noise floor | ＜3.1μV（dbA，AUX IN) |
| Frequency response | 20Hz~20KHz：±＜0.3dB（UAC) | ＜4.4μV（dbA，UAC） | |
| 20Hz~20kHz：±＜0.7dB(SPDIF IN ) | |||
| 20Hz~50KHz：±＜2.1dB（UAC) | SNR | ≥128dB (dbA，AUX IN） ≥120dB (dbA，UAC） |
|
| 20Hz~50kHz：±＜1.6dB(SPDIF IN ) | |||
| THD+N | ＜0.0003% (1 kHz/32Ω/dbA) | Peak output voltage | ≥18.9Vpp |
| Balanced headphone output performance parameters（4.4mm） | |||
| Output power2 | L+R≥2000mW+2000mW（32Ω /THD+N＜1%) | Output impedance | ＜1Ω（32Ω） |
| Crosstalk | ≥124dB(1 kHz/32Ω) | ||
| Output power3 | L+R≥560mW+560mW（300Ω / THD+N＜1%) | Noise floor | ＜5.1μV（dbA，AUX IN) |
| Frequency response | 20Hz~20KHz：±＜0.3dB（UAC) | ＜7.7μV（dbA，UAC） | |
| 20Hz~20kHz：±＜0.7dB(SPDIF IN ) | |||
| 20Hz~50KHz：±＜2.1dB（UAC) | SNR | ≥128dB (dbA，AUX IN） ≥120dB (dbA，UAC） |
|
| 20Hz~50kHz：±＜1.6dB(SPDIF IN ) | |||
| THD+N | ＜0.0003% (1 kHz/32Ω/dbA) | Peak output voltage | ≥37.7Vpp |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy