Synergy 8568-21 Heavy-Duty Tie Rod

GAP has the Synergy 8568-21 Heavy-Duty Tie Rod to improve the front end of your 2003-2013 Dodge Ram 1500/2500/3500 4WD. This Synergy Heavy Duty Tie Rod is designed to be a bigger and stronger, replacement for the factory tie rod in your truck. No drilling, reaming, or modifying of the knuckles is required when installing this tie rod. This tie rod uses the updated factory T-style steering design to stop toe-change caused by Y-style steering. Using the factory T-style steering design also stops induced bump steer inherent with most aftermarket "cross-over" steering kits. This Tie Rod also uses low misalignment "wobble stopper" Tie Rod End Boots to eliminate unwanted Tie Rod "flop" which results in a dead spot in the steering when changing direction. This tie rod can also work with factory or aftermarket steering stabilizers using a 1/2" mounting bolt with the Synergy clamp.

Benefits:
Strongest Dodge Drag Link and Tie Rod on the market!
Provides 2" Of Additional Ground Clearance From Stock Tie Rod
The Tie Rod Is Formed Similar To The Factory Bar To Clear Sway Bar Mounts

Features:

• Gold Dust Caps Are No Longer Needed
• Less Steering Wheel Play & Movement
• Causes Less Wear On The Drag Link Joint Increasing Longevity
• Lowers The Level Of Misalignment At T-Connection Joint When Installed
• Low Misalignment "Wobble Stopper" Grease Boots To Prevent Unwanted Tie Rod "Flop"
• Less Unwanted Movement In Tie Rod End Resulting In A More Direct Feel When Steering
• 100% Bolt-On Components Assures Trouble-Free Installation With The Use Of Hand Tools
• Newly Designed Single Plane Tie Rod End Based Off An End Used On Synergy F-450/550 Steering Kits
• Updated One Of The Forgings Welded To The Tie Rod To Have An Angled Engagement With The Drag Link End
• Steering Components Feature An Abrasion-Resistant Powder Coat Finish For Maximum Durability & Corrosion Resistance
• Synergy Double Adjuster Sleeve & Pinch Bolt Assembly Allows Adjustment Of The Tie Rod Length Without Removing It From The Vehicle
• Tie Rod Is Made From 1-1/2" x .188" Wall 4130 Chromoly & Heat Treated For Maximum Strength Resulting In A Tie Rod That Is 200% Stronger Than Stock Tie Rod
• Metal On Metal Synergy Tie Rod Ends Have Larger Than Stock, Heat-Treated Chromoly Ball Studs & Shorter Shank For Greater Strength, Longevity, & Connectivity To The Road