Light Hardwood Broken Ogee Decorative Moulding 7mm x 16mm x 2400mm

Light Hardwood Broken Ogee Decorative Moulding 7mm x 16mm x 2400mmLight hardwood broken ogee decorative moulding in a 7mm x 16mm profile and 2400mm length offers a classic, curved detail suited to interior joinery work. The traditional broken ogee profile adds a refined finish to walls, ceilings, furniture edges, and cabinetry without bulk. Specifications Specification Detail Material Light hardwood Nominal Size 7mm x 16mm Length 2400mm Profile Broken ogee Finish Smooth, ready to paint or stain What it's used for

Light hardwood broken ogee decorative moulding in a 7mm x 16mm profile and 2400mm length offers a classic, curved detail suited to interior joinery work. The traditional broken ogee profile adds a refined finish to walls, ceilings, furniture edges, and cabinetry without bulk.

Specifications

What it's used for

• Edging cabinet doors, drawer fronts, and fitted furniture for a clean, traditional detail
• Framing wall panels or dado rail arrangements as a complementary decorative strip
• Covering exposed edges on shelving, alcove units, or built-in joinery
• Adding a period-style finish to picture frames or decorative interior timber work

Fitting and handling

Allow the moulding to acclimatise in the room where it will be fitted for at least 48 hours before fixing, particularly in rooms with underfloor heating or variable humidity. Fix using a suitable wood adhesive along the back face combined with lost-head pins or a brad nailer for a secure, flush finish. Once fitted, fill any pin holes, sand lightly, and apply your chosen paint or stain, light hardwood takes both well and holds a good finish with minimal preparation.

FAQ

What is a broken ogee moulding profile?

A broken ogee is a traditional decorative profile featuring an S-shaped curve that is interrupted, or broken, rather than flowing continuously. It creates a subtle shadow line and a classic appearance commonly found in period and contemporary interior joinery.

Can this moulding be painted or stained?

Yes. Light hardwood has a smooth, close grain that accepts both paint and wood stain readily. A light sanding with 120-grit paper before applying a primer or stain coat will give the best result.

What is the best way to cut and join broken ogee moulding at corners?

Use a mitre saw set to 45 degrees for internal and external corners. For longer runs, use scarf joints cut at 45 degrees to disguise the join. A sharp blade reduces breakout on the ogee profile edge.

Nottage Timber Merchants supply a wide range of decorative moulding profiles to trade and retail customers across Bridgend and South Wales. Browse our full oak mouldings range online, with next-day delivery available to the Bridgend area.