WUPP 12V SAE Heating Motorcycle Handlebar Cover Bike Anti-Slip Grip Hand Warmer for Winter

WUPP 12V SAE Heating Motorcycle Handlebar Cover Bike Anti-Slip Grip Hand Warmer for WinterMade of PVC fabric, waterproof, wear resistant, tear resistant, anti folding, anti aging and water alkali resistant Intelligent temperature control chip, 5 speed adjustment Quick heat in 10 seconds, so that your hands are no longer cold in winter The heating sheet is fixed by sticking, which is convenient and fast IP67 waterproof level, the switch and handle cover can also work normally when soaked in water With reverse connection protection and anti

• Made of PVC fabric, waterproof, wear-resistant, tear-resistant, anti-folding, anti-aging and water-alkali resistant

• Intelligent temperature control chip, 5-speed adjustment

• Quick heat in 10 seconds, so that your hands are no longer cold in winter

• The heating sheet is fixed by sticking, which is convenient and fast

• IP67 waterproof level, the switch and handle cover can also work normally when soaked in water

• With reverse connection protection and anti-surge protection, it will not burn even if it is reversed

Specifications:

• Product: Heated Grips

• Model: ZH-1314A1

• Material: PVC, composite fiber

• Size: 10.5x9.5cm, 64cm strap length

• Input voltage: DC 12V

• Operating temperature: -30°C to 100°C

• With fuse blade: 5A

• Installation method: glue, L bracket

• Temperature control value: first gear (red): 18W/85°C; second gear (orange): 14W/75°C; third gear (yellow): 10W/60°C; fourth gear (green): 8W/55° C; fifth gear (blue): 6W/50°C

• Wiring method: red wire - positive, black wire - negative; if there is a SAE plug, directly insert the SAE plug into the original car's SAE plug

• Operation: When VIN <11.7V, no power on; VIN <12.2V, LED light flashes for 5 seconds (1hz 50%), power off

Note:

• 1. Please select the appropriate gear according to the ambient temperature. Under low-temperature conditions, when the temperature of the electric heating handle cannot be sensed in time and accurately due to the stiffness and numbness of the hand, please use the low or medium gear first to prevent high-temperature burns.

• 2. This product is only suitable for motorcycles with 12V voltage. Please read the installation diagram carefully before installation. Wrong wiring will cause damage to the components.

• 3. This product can only be installed on the handlebars of the motorcycle and used with electricity. Before installation, you can use the battery to test whether the product is correctly energized.

• 4. It is strictly forbidden to work with electricity (empty burning) when not riding, in order to prevent the temperature of the electric handle grip from being too high and damage the original handlebar.

• 5. It is recommended to connect the electric door lock wire, black - positive, green - negative. It is recommended to use a multimeter to measure.

Package included

• 1 x Motorcycle Grip
• 1 x Glue
• 5 x Cable Ties
• 1 x L Bracket
• 2 x Straps

Specifications