Timing Belt for Jeep Cherokee, Grand Cherokee & Chrysler Voyager 2.5/2.8 CRD - 941083

Vehicle Fitment & Part Details

Timing belt for Jeep Cherokee (KJ) 2.5 CRD 4x4 ENJ diesel, OE 05066928AA. Trade number 220RHP280HT. Drives the camshaft on the 2.5 / 2.8 CRD common-rail diesel range across the Jeep Cherokee XJ/KJ, Grand Cherokee ZJ, and Chrysler Voyager IV / Grand Voyager IV. Confirm compatibility by matching the listed fitment details, OEM reference numbers, and VIN/engine information where variants exist.

Key Details

SKU

941083

Component

Timing Belt

GTIN / Barcode

8021787085327

Primary Fitment

Jeep Cherokee (KJ) 2.5 CRD 4x4 ENJ 105kW (09/2001-01/2008)

Specs

28mm width, 220 teeth, trade number 220RHP280HT

Key Benefits

• Five Chrysler / Jeep OEM reference numbers listed for cross-checking against the original belt before ordering
• Trade number 220RHP280HT identifies the standard industry profile for this belt (28mm wide, 220 teeth, RHP tooth profile, HT high-temperature compound)

OEM Reference Numbers

• Chrysler: 05066928AA
• Chrysler: 05142579AA
• Chrysler: 46510625F
• Chrysler: 46510639F
• Chrysler: 510990259
• Jeep: 05142579AA

Product Specifications

Vehicle Fitment

Fitment Notes

• Always match OEM reference number(s) and vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
• This is the timing belt only — tensioners, idlers, and water pump are not included. For a complete kit including 3 rollers, see the matching kit SKU in the same range.
• This is a critical interference-engine component — incorrect fitment, timing, or tension will cause bent valves and major internal engine damage. Workshop fitment only.

Installation / Use / Maintenance Tips

• Timing belt replacement must be carried out by a qualified, VAT-registered workshop using the correct service manual, timing tools, and tension gauge for the specific engine.
• Always set engine timing using the manufacturer's locking pins and cam/crank timing marks — do not rely on belt tooth count or visual alignment alone.
• Replace the tensioner, idler pulleys, and water pump (where driven by the timing belt) at the same time. The labour cost of doing it later far exceeds the parts cost.
• Torque all fasteners to the manufacturer's specification in the correct sequence and check belt tension after the first complete crankshaft revolutions.
• Rotate the engine by hand through at least two full crankshaft revolutions after fitting and re-check timing marks before starting. Never start the engine without confirming correct timing.

Common Questions

Will this timing belt fit my Jeep Cherokee, Grand Cherokee or Chrysler Voyager?
This belt (941083) is listed for the fitments shown on this page. Confirm the engine code (ENJ, ENR, ENC, or EDK) stamped on the engine block and verify the VIN before ordering.

Are the tensioner and rollers included?
No — this is the timing belt only. For a complete kit including the belt plus 3 rollers, ask about the matching kit SKU in the same range.

What does the trade number 220RHP280HT mean?
220 = number of teeth, RHP = rounded high-performance tooth profile, 280 = belt width × 10 (so 28.0mm), HT = high-temperature compound. This identifies the belt's industry-standard specification.

What OEM part numbers does this cross-reference?
Cross-reference numbers are listed in the OEM Reference Numbers section above. Match at least one to your original belt before ordering.

How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. If unsure, request fitment assistance before ordering.